IPhone 3G screen goes white with thin black moving lines.

iPhone 3G screen goes white with thin black moving lines.What gives?
HowieG1

hello
Dear
The two crashes iPhone suddenly does not work never
It does not work and is the connection between the device and iTunes
What is the solution?

Similar Messages

MBP 15 is running and screen goes white with thin vert lines

Running normally and if I adjust the screen angle it goes white with lines. Just started happening. 10.5.8 about 4 years old

Based on your post, that seems the most likely problem but it could be something else. Before any repair is attempted, the problem has to be properly defined. You may try iFixit.com and see if they can advise you, have a replacement part and attempt to fix it yourself. This certainly depends upon all the chips falling into the right place with no guarantees of success. You must also consider the age of the MBP and its worth vs. the cost of the repair.
Ciao.

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When I connect my iMac to a hdtv, the screen goes white with snow

When I connect my imac to my samsung hdtv through DVI miniport to HDMI on the tv, the connection is fine for about 10-15 minutes and then goes white with snow. I had a macbook pro before and used to use the same connection on the same tv and it worked perfectly fine. Please help

Nope it won't do that on the mid 2011 iMacs. What you're trying is called Target Display Mode, the only way it would work is if the PC has Thunderbolt (which no PC has) and you use a Thunderbolt cable.
What you can do is hook up to two external monitors on your iMac (giving it up to 3 monitors) which is very cool and can improve productivity depending on what you use your iMac for.

Vertical lines on LCD - Black screen, goes white, fades to black again.

My 1Ghz G4 15" Imac is having LCD issues. It is in perfect working order, boots, runs fine on an external monitor via the adapter in back. I've read tons of issues with the black screen, but this sure looks a lot like a damaged cable issue, similar to an iBook when it starts to fail from wear. When the iMac is started, the LCD backlight comes on, the screen stays dark with the exception of a row of vertical lines starting about 2" over from the left edge, they appear to be 1 pixel wide and there are enough to make a 2" or so 'stripe' Each line is a different color, and they aren't the same from restart to restart. If the iMac goes to sleep the LCD shuts off and upon waking it shows the lines again, only the LCD will gradually 'bloom' full white (except for the lines) and then gradually recede to a purple, then black again. There does appear to be some damage at the base of the chrome stalk where it goes into the unit, with the seam split open slightly and the metal bent.
Seeing as how it's otherwise fully functional, and the LCD isn't cracked or otherwise 'dead', could it be a bad cable connection? Ideas? Thoughts? resetting PRAM and NVRAM did nothing, but again it works fine with an external hook up.
Thanks in advance!
IMAC G4 1GHZ 15" Mac OS X (10.3.9)

MacBook Pro (Early 2008): Dark bands showing intermittently on built-in display
MacBook Pro: Distorted video or no video issues . The affected computers were manufactured between approximately May 2007 and September 2008.

Iphone 3gs screen goes white after unlooking but works fine before

Hi everyone.
This is my first post here.
I got an Iphone 3GS that worked fine yesterday and then suddenly after the unlook the screen the screen goes totlay white.
I have tried the rebot thing and after that the phone works untill it looks the screen and the it back to white again.
I have tried to update the phone software to the latest because the phone looks fine in iTunes. No change
I have done the factory reset no change.
I have even but an old backup to the phone when the phone worked. no change.
What can I do to get my phone working?
thanks in advance

This is a rare but classic iPhone 3GS White Screen Problem. It is due to faulty LCD Display.
Before and during any iPhone 3GS repair make sure the iPhone is OFF. Because the 3GS Logic Board and new LCD is vulnerable to damage when repaired with it being ON.

Iphone 3gs screen goes white, after locking ???

my iphone 3gs botts up fine, and everything works, but as soon as i lock it and then try to unlcok it, the screen turns white. tbhis has happened after i have replaced the digitizer and LCD ?? please help, what could the fault be ???

I am not jailbroken, on 5.1.1 (9B206) and have been dealing with this problem since last night. I was using the phone like normal, nothing changed and once I tried to unlock it was white screen. I went to bed and once my alarm in the phone was going off this morning it kept being the white screen and I could not unlock it. After snoozing it somehow from hitting home and the sleep/wake button, the screen randomly came back to life. Now 9 or so hours later, with nothing being updated, added to the phone or changing any sort of way, the white screen when I try to unlock it is back.

Why is my screen going white and then black?

Since Wednesday [two days ago] my phone has been acting like a dying television. The screen will go white and then black and then it won't respond. When I am able to get the screen to come back the picture freezes, jumbles, and will not respond to my touch. I have the 32GB 5C with the most recent updates installed. The top two corners of the screen are also raised in comparison to the bottom corners. I've heard from a friend that my battery could be swelling and was wondering if maybe this was also part of the problem.
I spoke to an apple care specialist who told me to restart, reset, and reboot the phone, but each step only made things worse. I have not damaged the phone, I've had a case on it at all times and it has not been exposed to any water.
Any help would be very much appreciated. I will not be able to take it in for service until Sunday [two days from now]

Could be a graphics chip issue. If the machine is newer than October 2011, boot with the 'D' key on its own. Otherwise find the original installer discs, or use this tip to find the age of the machine to make sure you can get the right hardware test with the 'D' key boot. You can either call AppleCare for the original discs, or see if it is available from this link:
https://github.com/upekkha/AppleHardwareTest

Ipad screen went white with gray/black line through it. Worked one minute and not the next. It has not been jailbroken.

The ipad screen has went white and has a gray line running through the middle of it. It worked one minute and not the next. It has not been jail broken.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

After a few hours of inactivity , my screen goes white with a flashing file folder in the centre with a question mark in the centre of said folder. at this point i can only unplug the computer for it to reboot properly, then it is fine till the next go..

After a few hours of inactivity, I return to find a white screen with a file folder in the center of the screen with a ? mark in the centre of said folder and both are flashing...am i compromised?

No
Solution may be found if you search in the "More Like This" section over in the right column.

Iphone 3GS Screen goes blank with full battery and ipod has no sound

Since 10th Feb my Iphone 3GS has had no sound on the ipod, although I can see the track is playing, and more importantly the battery just goes every few mintues regardless of the amount of battery left.
I'm assuming this has been caused by the 6.1 update. However, the 6.1.1 fix seems aimed at iphone 4S and it does not show up on my itunes.
Prior to 10th Feb phone worked perfectly.
Any advice?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
What about free space? Do you have enough free space on your iPad? With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.

Screen goes white (power issue?)

so as u read in the title, quite often now when charging (both ac and USB) my iphone's screen goes white an/or my phone gets really hot. i've been ignoring the issue for maybe 2 weeks now. but now my phone gets real hot and the screen thing is happening more frequently.....
i am real busy with school and dont have a chance to go to the retail store. but i want to hear your thoughts?
when i call apple they tell me i need to purchase the apple care for the phone or the one time 29$ which seems like a rip off

First, your phone should come with a 1 year warranty but the phone support is 90 days I believe so if you have had your phone for more than 90 days, it is likely you will be charged for the phone support.
Are you able to restore your phone to it's factory setting? Maybe this should solve the problem. If not, you will have to find a time to the apple store and get it checked out.

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

Sounds like a hardware issue. Bring the phone to Apple for evaluation.

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

IPhone 3G screen goes white with thin black moving lines.

Similar Messages

Maybe you are looking for