IPhone 4 keyboard freeze, runs slow and crashes - is there a fix?

Not been able to use my iPhone 4 for over a week now originally due to the screen freezing on "enter passcode" page. The probelm has escalated to keyboard and generally unable to use the handset in any reliable way. Please point me in the right direction to fixing this.
Symptoms and log of activities in chronological order;
- the arrow freezes when "slide to unlock". This would persist over a period of time (a day to 7-8 days), first incident around April. After many manual resets, able to access without the arrow freezing. Observed that this kept happening after the iPhone has been switched off.
- the above problem returned last week after the device was switched off then back on. This time, the arrow freezed for 15-30 seconds then "enter passcode" page appeared. The keyboard that appears is unresponsive so nothing happens when you press the buttons. The text entry cursor does not blink. iPhone eventually crashes with a spinning loading sign on freeze.
- cannot switch off phone, unless with hard reset by holding the home + on/off buttons. - the same issue returns immediately.
- restoring iPhone (first time) - required to update to IOS 5.1.1. Still the problem persists
- appointment with Genius bar - explained the problem. Does not take a look at the handset once but offers a replacement at a cost.
- Suspect it might be a glitch rather than a hardware damage (it's only under 8 months old) so attempts another restore. This time, set up/configure screen comes up on the device. Chooses not to set passcode. Screen is responsive, able to choose launguage, country etc... Hope returns, it actually seems to be working. Slide to unlock, takes 15-30 seconds but does unlock. Able to open and delete emails and SMS texts. Apps such as facebook seems to be working although generally everything is slow.
- HOWEVER, keyboard across all apps unresponsive and text entry cursor does not blink. The apps crashes then returns to home screen.
- Deleted emoji international keyboard in the hope that the keyboard problem would go away.
- After a number of crashes, the screen is black. The Backlight of the screen is on but unable to switch off or do hard reset.
From deduction, the problem seems to be with the keyboard across all apps.
Has anyone had similar problems and did you find any fixes?
I really don't want to have to pay for another replacement so please please, do share your knowledge. Thank you

Hi linkslice,
Funny you say that... the iPhone's audio out was playing up, not recognising the headphone. I switched the iPhone off to shine some light down it to see if something had gone down it and that's how the problem of rebooting itself started.
I took it into Apple store yesterday to the Genius bar and they carried out a few tests. They suspected it to be a software issue but the diagnostic returned clean so uploaded new firmware. The problem still persisted so they had to look inside. He returned 10 mins later with the following results; all looked fine on the inside, once put back together, the screen was not responsive and rebooting continuously. They couldn't figure out what was wrong with it so I've now got a replacement handset which is working fine after a restore from backup.
I suggest you take it into the store to have it looked at. Let us know if there was a solution to yours.
Thanks all for your help.

Similar Messages

  • After installing IOS5 my iPad runs slower and crashes often when I have safari or any application opened. Is apple working on fixing this issue? is it happening to most of you or just me?

    After installing IOS5 my iPad runs slower and crashes often when I have safari or any application opened. Is apple working on fixing this issue? is it happening to most of you or just me?
    I appreciate any information you can provide. Using this device is getting annoying !

    I'm using mine right now to answer you and I've not had the issues you are having. Have you tried a Restore from Backup?

  • My Iphone 4 has started running slower and freezes

    My Iphone4 has started running slower and freezes

    mishnin wrote:
    did that several times but it did not help?
    See your other post...
    https://discussions.apple.com/message/24486720#24486720

  • Mac running slow and crashing

    Lately, my mac has been running slow, freezing, restarting, and this is new...
    I have a lot of things in imovie... so I presume it might be that, but this is ridiculous!  It is constantlly beachballin'!  How do I make my Mac perform like it did when I first had it!

    If you are experiencing kernel panics, log it and then post it:
    http://support.apple.com/kb/ht2546
    You might look for methods here for improving performance:
    http://www.thesafemac.com/mpg/
    Ciao.

  • IPad 1 updates makes apps run slower and crash

    Hello everyone,
    I have 34 updates in the app store until now, i always updated everything to the latest but noticed things are getting slower and very crashy, the updates are obtimized for newer ipads so likewise it gets slower on the old ipad, i dunno why it notifies an ipad one user to update?? Its not for me!
    So, should i keep updating apps?? Sometimes i think that its intended by apple to get old ipads not to work properly to get me think about a new ipad, well devices  like ipad is not something to discard after a while you know, i will stick with it until it burns or somethin :P

    As far as I know - you can't update apps if they are for the new iOS only. The apps shouldn't update and you should get a message that the updates will not work on your iOS.
    Tap on app icon that needs to be updated and read the description first. Don't tap on "Update". Read the requirements first. If the primary reason for the update is that it is optimized for iOS 6, then don't update it - even it even can be updated that is.
    Some basic troubleshooting might help when the iPad gets "crashy". Try these and see if they help.
    Quit all apps completely and restart the iPad and make a fresh start. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or try this ....Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • New OS system safari now running slow and crashing repeatedly

    Can someone please tell me why my Macbook Air running Safari with just 3 windows open in Safari is now running incredibly slow, barely downloading either java or flash text and invariably causing it to crash with the spinning rainbow appearing almost every 2 minutes.
    I am very inept when it comes to computers but cannot believe the new system would cause such problems.
    Solutions all helpful.
    Thanks,
    Sam

    Similar problem https://discussions.apple.com/message/23591269#23591269
    Reset PRAM.  http://support.apple.com/kb/PH4405

  • My ipod touch 4g has been running really slow, lagging, and a ton of apps are running slow and crashing, does anyone know what's wrong?

    Its not jailbroken, does anyone know whats wrong?

    Did you try to reset the device by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    If this does not work, set it up as new device, explained here:
    How to back up your data and set up as a new device

  • Iphone 3gs running slow and freezes

    My iphone 3gs is running slow and will freeze up since I upgraded to v5.
    Is anyone else having this problem and if so is there a fix??

    Some Users have reported that a Restore has Resolved Issues after the Upgrade...
    If a Restart and a Reset do not help... Try a Restore from Backup... if the issue persists Restore as New...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • I recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in notebook trying to record.

    i recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
    Also, I feel that it overheats often and my battery runs out pretty quickly.  I had the macbook (black) and this never happened before.  I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

    This is exactly what keeps happening to mine too.  I was at a conference taking notes, and I was
    using the Notebook template, and doing some audio recording simultaneously.  About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working.  However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it). 
    Does the crash happen to you under similar cirucumstances?  The update might help a little, but it is definitely not the solution.  Does anyone have any solutions?  Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

  • Recently started running slow and freezing up while loading web pages etc.

    Problem description:
    Computer running slow and freezes up for a few minutes from time to time, I have owned it since 2011 with no issues until now.
    EtreCheck version: 2.1.2 (105)
    Report generated December 15, 2014 at 9:58:50 AM MST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:10:42
    Disk Information: ℹ️
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 318.84 GB (24.01 GB free)
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/launchd.conf - Exists
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Adware: ℹ️
      Geneio [Remove]
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.mice.driver.PS3Controller (1.0.0d1) [Support]
    Launch Agents: ℹ️
      [running] com.amazon.sendtokindle.launcher.plist [Support]
      [running] com.robohippo.HippoConnectAgent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.genieo.completer.download.plist Adware! [Remove]
      [loaded] com.genieo.completer.update.plist Adware! [Remove]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.nds.pcshow.plist [Support]
      [invalid?] com.nds.pcshow.uninstall.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ℹ️
      Omnibar Adware! [Remove]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          17% mds
          6% WindowServer
          0% AppleSpell
          0% fontd
          0% mds_stores
    Top Processes by Memory: ℹ️
      120 MB Safari
      77 MB mds_stores
      69 MB com.apple.WebKit.WebContent
      60 MB ocspd
      60 MB WindowServer
    Virtual Memory Information: ℹ️
      1.24 GB Free RAM
      1.15 GB Active RAM
      853 MB Inactive RAM
      1.05 GB Wired RAM
      1.00 GB Page-ins
      25 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 15, 2014, 09:48:45 AM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • HT4922 Downloaded 5.1.1. to my iphone. Now, Safari will not connect to my server.  Can not download web pages and many of my apps. Running very slow sluggish! Is there a fix? Sound like other users are experiencing same problems.  Anyone have a solution?

    Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish.  I have read several other users have experienced the same problem. Any solutions?

    Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
    You need to go through all steps in succession until your problem is solved.  If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

  • WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark.

    WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark and basically force us to upgrade to newer devices. Apple could of done better with the update and needs to resolve these issues.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    The App store crashing is a known problem.
    IOS 6 App store crash: Apple Support Communities

  • Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc.  I'm disappointed with the performance. Any

    Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple?  I've been sending them so many reports after crashes, that their file must be full!

    Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
    BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
    Last login: Thu Nov  3 20:55:11 on console
    Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    com.AmbrosiaSW.AudioSupport(4.0)
    Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    Password:
    com.openssh.sshd
    com.stclairsoft.DefaultFolderXAgent
    com.microsoft.office.licensing.helper
    com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
    com.bombich.ccc
    com.adobe.SwitchBoard
    Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    com.sony.PMBPortable.AutoRun
    uk.co.markallan.clamxav.freshclam
    com.veoh.webplayer.startup
    com.macpaw.CleanMyMac.volumeWatcher
    com.macpaw.CleanMyMac.trashSizeWatcher
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
    com.adobe.AAM.Scheduler-1.0
    Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    AEProfiling.framework
    AERegistration.framework
    ApplicationEnhancer.framework
    AudioMixEngine.framework
    FxPlug.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    ProFX.framework
    ProMetadataSupport.framework
    TSLicense.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    AdobePDFViewer.plugin
    EPPEX Plugin.plugin
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    JavaAppletPlugin.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    SharePointBrowserPlugin.plugin
    SharePointWebKitPlugin.webplugin
    Silverlight.plugin
    flashplayer.xpt
    iPhotoPhotocast.plugin
    nsIQTScriptablePlugin.xpt
    /Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.sony.PMBPortable.AutoRun.plist
    /Library/LaunchDaemons:
    com.adobe.SwitchBoard.plist
    com.apple.remotepairtool.plist
    com.bombich.ccc.plist
    com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
    com.microsoft.office.licensing.helper.plist
    com.stclairsoft.DefaultFolderXAgent.plist
    /Library/PreferencePanes:
    .DS_Store
    Application Enhancer.prefPane
    Default Folder X.prefPane
    DejaVu.prefPane
    Flash Player.prefPane
    Flip4Mac WMV.prefPane
    /Library/PrivilegedHelperTools:
    com.bombich.ccc
    com.microsoft.office.licensing.helper
    com.stclairsoft.DefaultFolderXAgent
    /Library/QuickLook:
    iWork.qlgenerator
    /Library/QuickTime:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    DesktopVideoOut.component
    DivX 6 Decoder.component
    FCP Uncompressed 422.component
    Flip4Mac WMV Advanced.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    LiveType.component
    /Library/ScriptingAdditions:
    .DS_Store
    Adobe Unit Types.osax
    Default Folder X Addition.osax
    /Library/StartupItems:
    Library/Address Book Plug-Ins:
    Library/Frameworks:
    EWSMac.framework
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    com.macpaw.CleanMyMac.trashSizeWatcher.plist
    com.macpaw.CleanMyMac.volumeWatcher.plist
    com.veoh.webplayer.startup.plist
    uk.co.markallan.clamxav.freshclam.plist
    Library/PreferencePanes:
    .DS_Store
    Perian.prefPane
    WindowShade X.prefPane
    Library/QuickTime:
    AC3MovieImport.component
    Perian.component
    Library/ScriptingAdditions:
    Steve-Kirkbys-iMac:~ stevekirkby$

  • HT2353 Macbook Pro running slow and freezing

    So it just started yesterday running slow and freezing. I'm starting to get very frustrated. I research to see what could be the problem. I saw people suggesting that it could be the storage. My storage is 464.75 free out of 499.25. I just brought this computer last year on christmas. I thought it could be adblock but it never cause me problems but I paused the app and it still doesn't work. What is wrong? Should I restart the computer? If I do how can I backup my things? Also i'm really not a computer person so if you can describe to me the problem in layman terms that'll be great!
    OS X Mountain Lion 10.8.4
    OH! and it's not just safari that's going slow but itunes,word,etc

    Hello,
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?

  • MacBook Pro running slow and freezing--Installed OnyX

    I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.

    I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.

Maybe you are looking for

  • Can no longer burn an audio CD in iTunes 10.

    Suddenly I can not burn an audio CD in iTunes. I currently have iTunes v. 10.7 which I have just upgraded from the previous version as I had the same problem burning a CD. I am using OSX v. 10.6.8. When burning a CD or DVD I always use my ex drive a

  • How do I share iPhoto libraries between two Macs?

    Hi! I would ideally like to have one iPhoto library to share between two different Mac laptops. Is there some way I can set it up so that the same library can be shared, edited, and updated? Or if not, is there a way I can see the other Mac's iPhoto

  • Date Picker with Previous and Next Year Options

    Hi All, I am implementing a date picker in my application which is tied to an attribute of type PA0001-BEGDA. Date Picker as such works fine but navigating to previous year and Next year options are not available. User has to go month by month to dif

  • Windows8 driver for hp 7610 scanner

    Any such driver exist? I had it workiing on a win Vista laptop but then then a disk update became necessary and my problems began.

  • Restoring all archivelogs from a backuppiece for RAC DB?

    Is there any way to tell rman to restore all archivelogs from a backuppiece (or backupset, which are equivalent in my case)? Why I want to do this: I want to restore quite large number of archivelogs (to recovering a standby database) from multiple b