Iphone 4 was dropped in cold coffee. I let it dry in rice for a week. It turns on but the screen is black, and if you hold it at an angle you can see the apple logo. How do I fix this

I let my phone dry out in rice for over a week. I see it turn on but the screen is black. If you hold it to a light you can see the Apple logo. How can I fix this?

It depends which country you are from below is US
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

Similar Messages

I recently restarted my iphone and now all that appears is the apple logo how do i fix this problem

i recently restarted my iphone and now all that appears is the apple logo how do i fix this problem?????

Plug it into your computer and restore it.

My Macbook pro 13 inch is stuck on a gray screen with the apple logo, how do I fix this?

Sooo, I was using my laptop for a while and the charger was kind of broken, it was dip in and out, and slowly I got a "Service Battery" notification. I updated my system and now everytime I try to boot up my computer it'd show a gray screen with the apple logo and a loading bar with a circular loading icon but it never actually boots up. It stays stuck at that loading screen. I don't think it's because I uploaded my system that it happened, but I'm wondering if it's because I didn't change my charger/battery, and I'm wondering if I have to get the harddrive changed or is there a way for me to recover my files and whatnot without having to whip it. Please help, and thanks in advice to any help offered.

Dwaniej,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the grey screen now?

I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it and now its frozen on the apple logo how do i fix it? ps button dont work

I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it i guess and now its frozen on the apple logo how do i fix it? ps my ipod home button doesnt work.

Try as much as you can. When it says to place in recovery mode use this program instead.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

TS1424 i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?

i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes
If you aren't in a country where you can re-download music or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My macbook air does not start up successfully. when i turn on the power, it just turn blue after the apple logo, how to reboot or repair,.. pls help me what is the buttons command... thanks in advance.

pls help me how to reboot my macbook air,.. because starting it up was not successful. the screen just turns blue after the apple logo appeared.

i know loads of people who have had this problem including me. The Java script update apparently had some virus that has overloaded the start up disk. I took to apple who said i have to have the machine rebuilt but first i have to go to a data recovery company to get back everything that was on it. Data recovery company have quoted me nearly £1000.

My MacBook Air won't start it's grey with apple logo Howe do I fix this?

I have 2008 MacBook Air today I can't start up. When I press the power button it shows gray screen with apple logo and that thing spinning . How do I fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

My iPad won't connect to the apple store, how do I fix this?

My iPad apps are not connecting to the apple store. So I can't update my apps. What can I do to fix this?

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

My i pod touch turns on but the apple logo just shows up thats it what will i do?

what do i do

Hello jackers,
Try a hard reset. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. This may or may not work the first time around, so don't be afraid to try this as many times as you feel necessary.
If still no luck, try connecting it to your iTunes library in Recovery Mode and restoring it there.
http://support.apple.com/kb/ht1808
B-rock

I have an Ipod 4th generation that the buttons arent very reliable on, and whenever i try to turn it on it gets stuck on the apple logo. how do i fix it to where i can turn it on and it works?

How do i turn the ipod on without it getting stuck on the apple logo

Try this previous discussion
Turn on without Home/Power Button

Desktop is black and dock disappeared. I have to use spotlight search to open apps. How do i fix this?

My desktop is black and the dock is not on my screen. I have to use the spotlight search to open apps. When i log in guest user everything works fine. It's only my account. How can i fix this?

open spotlight and type the name of any folder. Select it. A finder window will open. Basically you just need a finder window. right click on the title of the window. You will get a dropdown menu. Select the name of your hard disk ( most probably "Macintosh HD") now you will see a folder named system alongside applications, users, library, etc. click on the system folder. Then click on the library folder which is the only folder that appears once you get inside system folder.
now scroll down and find CoreServices folder. Open it and then find dock.app and open it.

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work????

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-Esteban

Hello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

HT201269 my iphone 3 cannot open.always blinking with the apple logo, how can i open my iphone 3?

my iphone 3 cannot open.always blinking with the apple logo, how can i open my iphone 3?

Hello there, Shaneol10.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Iphone 4 was dropped in cold coffee. I let it dry in rice for a week. It turns on but the screen is black, and if you hold it at an angle you can see the apple logo. How do I fix this

Similar Messages

Maybe you are looking for