IPhone 4 Won't Charge. Tried Everything

Hey Everyone,
Well, I'm about to rip my hairs out of my freaking head. Sunday night at 8 o'clock. About to climb into bed and watch a little TV. Plug my iPhone in. Boom. Nothing. Try again for another 10 minutes until eventually it powers down due to low battery. It is now 12:30 at night and still no luck. I've tried everything.
Holding the Home and Sleep button just makes it flash the icon that says it needs charged. My cords are fine, they work with my iTouch. Occasionally it will show the charging symbol for a split second, then it's back to the plug sign. I'm so tired and so frustrated with this. ANy help will be greatly appreciated. I need my phone to work. I'm charging it through a cord that is connected to a iHome. I've tried wall chargers and my computer. Nothing. THe iPhone looks like it dosn't even recognize that there is a USB in it. PLEASE HELP ME.

Inspect the charging port area for dirt/debris/fluff build-up that may be preventing a good connection and use a wooden toothpick, soft clean toothbrush, or a can of compressed air to clean it. Also look for bent or broken pins. Try another cable and/or charger block (be sure to always use a genuine Apple certified brand) in a known good outlet. If you're using a USB port, try another port. If you're using a hub, try a direct connection. If you're using a USB port in the front of a desktop computer, try one in the back. If all these fail, make an appointment at your nearest Genius Bar to have the device evaluated.

Similar Messages

  • Hey, its impossible to move jpeg or png files from my pc (w7) to my iphone (4g, latest firmware), tried everything, even 5,99 € app and 20 hrs of googling, pls help

    its impossible to move jpeg or png files from my pc (w7) to my iphone (4g, latest firmware), tried everything, even 5,99 € app and 20 hrs of googling, pls help

    20 hours of googling?  It's in the user guide on p.117 and 53..
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
    and here... http://support.apple.com/kb/HT1296

  • Iphone won't charge after overheat warning

    Ok so every night I go to sleep I plug in my phone to charge, play some youtube videos or listen to music or podcasts( on the official apple app) until i fall asleep and every morning I have woken up to a fully charged phone, I have been doing this for about 1Year and 5Months no issues, however about a week ago I fell asleep listen to a podcast, whilst my phone was charging, when I woke up  the next morning I went to grab my phone and found that there was an overheating warning, i mean It was so hot I couldn't hold the phone for more than five seconds, so I placed it on my window sill(outside) for five minutes and it cooled down and worked perfectly, next few nights I listened to music and the issue didn't occur, however, two nights ago I listens to a podcast again and when I woke up the next morning my phone was 100% charged but boiling again with the heat warning, this time I hung it in front of my fan until it cooled down, after a full days use of my phone( no performance issues) I went to charge it up, this night I did not listen to anything, when I woke up the next morning 10hours later my phone had gone from 10% battery to only 18%, it had been like it ever since and just won't charge, is there an issues withy charging dock on my phone or my battery? Many thanks
    (i have already cleaned charging dock with toothbrush and tried different sockets and leads)

    (SOLVED)
    After 10+ hours, Since it works in the BIOS screens, I decided to wipe the drivers.
    Plugged my phone into a driverless windows and it works fine.
    The reinstalled drivers did not work for me because I didn't manually wipe the driver files
    Plugged my plugged my iPhone in and everything suddenly works
    Next I have to go to war with my malfunctioning windows update
    Thanks zelous for the suggestion, though it didn't work because my iPhone wouldn't connect at all. it did point me in the right direction. Thanks!

  • IPhone won't charge, won't sync, won't do anything...

    My (1 month old) iPhone 3GS won't charge. Not via USB, or mains adapter. It just flashes up the "battery almost empty please charge me" icon even when plugged in. When plugged into the computer a message comes up "USB Over Current Notice. A USB device is currently drawing too much power. The hub to which it is attached to will be deactivated". The USB drive(s) are fine, all other things plugged in work absolutely fine so it's definitely the iPhone.
    I have spoken to Apple via my Service Provider (Orange). The woman said she was sending me a list of things to try, though since I can't even turn the phone on or plug it in to the computer I can't really do anything. However her email hasn't even arrived. Can anyone help me with a list of things that I should try (which is presumably what she is supposed to have sent me) so I can get back to them and get a new iPhone? I need to be contactable for work and this is a real problem.

    I don't have any other USB devices connected - I've just tried others to check that its the phone not hte computer. All others devices work fine when connected. Surely it's the phone not the computer - as I said it won't even charge when plugged directly into the main using the iPhone mains charger?
    The OS on this laptop is actually 10.5.8. Will try restarting it again now but I think my other half tried that last night

  • IMAC, iMovie, iPhoto will not recognize iPhone, won't charge either

    Hello All:
    I just took some video with my iPhoto 3GS, and connected my iPhone to my iMac only to find that:
    iPhone is not recognized by either iTunes, iPhoto or iMovie and what's more it won't charge. That is, my iMAC can't detect iPhone as a connected device. I went to the Apple support page and ran through all of the troubleshooting steps (except clean uninstall and reinstall of iTunes.)
    As a control, I connected iPhone to my MacBook and all fine: it charges, iTunes recognizes it as a connected device, as do iPhoto and iMovie.
    This is a new thing, as when I got the iPhone a month or so ago, I used my iMac to initialize it.
    All software up to date, all USB ports on iMAC work, cable is fine.
    The ONLY new software I have loaded since I last used iPhone and iMAC together is Snapz Pro X (trial), so I did a thorough (and I mean thorough) uninstall of that...no change.
    I live in Spain, so my closest Genius Bar is London, and I'm not flying up with a 24"iMAC under my arm!
    Any help?
    Steve

    Isn't it always the last place you look for something is where you'll find it?
    Last night when I made the post I was just too tired to delete iTunes and go through the Libraries to scrub out the files.
    This morning, with a Cappuccino I did it.
    Reloaded a fresh copy of iTunes...all better now.
    Perhaps Apple support on this topic should change "on rare occasions you will need to reinstall iTunes" to "you will need to reinstall".
    Anyway, better now.
    BTW: the reason all this happened is because I wanted to transfer iPhone videos to my Mac to work on them in iMovie. iMovie won't recognise the iPhone, but, Image Capture does!! Just offloaded the 10 vids from iPhone in .mov format. I'm good to go.
    Merry Christmas to all, and to all a good night!

  • My iMessage wont activate on my new iPhone 5c, I have tried everything. Please Help!

    I have tried everything in all of these discussions and i still cant get my imessage or facetime to activate on my iphone 5c. Please help! I've been trying since Thursday!

    I add to this discuss topic.  I have similar problem and tried everything in Apple Help support for this problem.
    Trying to activate iMessage, and appears "Waiting for activation..." (Esperando activación... in spanish).  In the iMac and iPad an advise window shows saying another device is using the Apple ID.  OK, accept in both devices but in the iPhone 5S still "Waiting activation...".
    I did a reset about all settings, activate iMessage for 1 hour and active again, hard reset, under wifi or 3G/LTE connection, loging out and in again with my Apple account and the problem still there.  "Waiting activation...".
    Solution anyone?
    Thanks!!

  • Iphone 4 ..i tried everything

    i tried everything.. in imac error 2001 or 2006 on windows-base error 21.. unplug everything again and again.. 10 seconds 30 sec homebutton + the other buton sound averything ..my iphone is dead.. it shows the icon with the usb and itunes or the silver apple blinking re nothing...  i will try service..

    http://support.apple.com/kb/TS3694#error2001
    http://support.apple.com/kb/TS3694#error21
    Some possible causes:
    1. Your antivirus is blocking access to gs.apple.com.
    2. Your phone is jailbroken.
    3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
    4. Apple's activation servers are down (very rare, and never for more than an hour or so).
    For 1. try disabling your antivirus.
    For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

  • Nano wont charge - tried everything, even went to the store

    Ok, My comp is Windows 2000
    i got the nano 3 weeks ago
    it hasn't charged once
    ive tried everything on this site and it still wont work
    the box on my comp is custom made but i know it works with ipod's fine because my mini worked fine with it
    the people at the apple store said the nano was charging there
    i did get rid of all my software for my mini and put all the needed software on the computer for the nano.
    so one question...what do i do?
    oh, and i only have 3 more days to return it if it doesnt work
      Windows 2000  

    Do you have service pack 4 installed on your windows? If not you need to get that downloaded and installed from microsoft.
    To view which service pack that you have installed, right click on My Computer (either the icon on your computer desktop or in your windows start bar) and then left click on "properties." Your service pack information should be displayed in the window that comes up.

  • G 505S "Plugged in and not charging" (Tried everything!!!)

    Hi everyone!
    I hope someone in the community can help me out. I've tried calling in to Lenovo and I've only been disapointed and VERY ANGRY with Lenovo so I hope someone here can help me.
    My G505s has never properly charged the battery. The battery icon says "plugged in and not charging". I've tried everything, replacing the battery, uninstalling the Microsoft Battery driver, uninstalling Lenovo energy management etc.
    I've tried the work arounds I've found online to no sucess.
    Does anyone have any ideas? Has anyone ran in to this with the G505s and found a fix?
    Thanks!

    hi apb1019
    Welcome to the Lenovo Forums and sorry to hear about your battery problem.
    The plugged-in not charging message is usually triggered when the Lenovo Energy Management / Lenovo Energy Manager is set to Optimized Batteyr Health (Win8) or Conservation Mode (Win8.1)
      - Link to picture
      - Link to picture
    Just to verify:
    1. When you uninstalled the energy management software, are you getting a 0% available, plugged-in not charging message or 60% available, plugged-in not charing ?
     - Link to picture
    2. Have you tried charging the battery (for an hour or two) while the computer is off?
      - Link to picture
    If the battery doesn't get fully charge while the computer is off then it's likely that the battery is failing. In this case, I recommend you contact Lenovo one more time on how to go about getting the unit serviced (they'll most likely send you a new battery).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPhone won't charge on computer

    My iphone will charge when plugged into the wall, but won't charge or connect to iTunes on my computer.  any suggestions???

    Yes, it's the same cable.  It will work in the wall, but not on my computer.

  • After upgrade to Lion, iPhone won't charge after Mac goes to sleep

    I did a clean install of Lion, and have run Software Update. There are no problems with the system, but I noticed that when I plug the iPhone in to the Mac, it won't charge when the Mac goes to sleep.
    The iPhone gives the normal charging tone when it gets plugged in, and if I l press the Home button, it displays the charging screen. If I select Sleep from the Apple menu, the Mac goes to sleep and the screen on the iPhone blinks on as if not plugged in, showing the normal unlock screen. When I wake the Mac, the phone beeps and shows the charging screen.
    Is there a setting I can change to get the iPhone to continue charging after the Mac goes to sleep?

    This behavior is new in my experience, having been on Snow Leopard. I've always just plugged the iPhone into my keyboard since it is very convenient, and it has always charged overnight, even while the Mac slept. So this is not normal behavior for my system.
    My question is, has this changed in Lion?

  • IPod don't  react or want to charge (tried everything)

    My iPod 30Gb just one day after 3 months if using just stop react any buttons. It shows me do not disconnect screen and don't want to be charged.
    tried all procedures listed in troubleshooting. What is wrong ?

    my iPod is having the same problem, and it's the same model, 3 months old too. it won't charge, won't reset, won't anything. maybe the battery is defective or the problem is with the recent firmware update (other people here on the forum are having similar problems)
    take the ipod to the apple support and get them try restore the previous firmware version

  • IPhone won't charge through iTunes

    My iPhone 3G will charge when I conect it to the AC Adapter, but for some reason today it won't charge when I connect the same wire to my Macbook. iTunes does not recognise the phone and so therefore I cannot swap tunes on it.
    Any ideas?

    Reinstall iTunes. If that doesn't work, remove and reinstall AMDS:
    http://support.apple.com/kb/HT1747

  • IPHONE WON'T CHARGE OR START UP

    my phone 3gs today will not charge, is now dead, and will not turn on

    I had a similar thing happen.  I had it on a USB charger all night on my PC.  It was still dead in the morning, whereas it usually charges in an hour.  It's not like I noticed charge times take longer or shorter lately.  It's not like the phone hasn't been holding a charge lately.  Just last night BAM and it's dead and won't charge.
    I brought the phone to work and had it on a different cable charging from my work computer.  Several hours of this and nothing.  I looked online.  I found your post and a few others.  And now, I've got it working.  Here's what I did.
    1.) From the screen where it was a red line on a dead battery, I held the power button down until it officially shut down.
    2.)  I unplugged the charging cable and took the case off the phone.
    3.)  I found a paper clip and used it to remove the SIM card, and left it out for a few seconds.
    4.)  I put the SIM card back in, plugged the cable back in, and powered it up - in that order.
    After it started up it showed it was fully charged!  Just a minute before it showed as fully drained of charge.  I think that the problem was not with the battery itself but the charge detector.  When you let the charge get too low, it can't even tell how much power is there like when a person has hypothermia and looses simple brain fuction and can't even process sugar as fuel.
    If you usually charge in a cradle type charging station, go to Best Buy and get the iPod USB charging cable.  Pop the SIM card out for good luck, and then see if it turns on with the cable plugged in.
    By the way, if problems continue you should check the power scheme of your computer's USB ports.  Some have a function that puts to sleep USB ports that are not in use (Windows 7).

  • Dvd stuck in Dvd drive, won't eject, tried everything

    Hi, I inserted a dvd into the dvd drive and I had headphones on so I couldn't tell but I don't think it made any noise at all when I put it in, meaning it didn't pull it in like it normally does. It just kind of slid in and got too far so that I can't pull it out. I have tried everything. Hitting eject shows the eject symbol on the screen but does nothing. It does not show and dvd on the desktop and it isn't making any noise at all. I have restarted and tried holding the mouse button down on startup which did not work and tried getting it out with a thin card as suggested in other places. Any suggestions?

    Hi,
    I don't know how helpful this is, but I just luckily got out of a similar situation. I tried all advice on this page, nothing worked. The CD was still stuck in the drive, and despite the fact that I could hear it running during start-up, it did not show up on the desktop and the dvd-drive was no longer recognized by the system.
    I've had a disc stuck once before, and then I eventually had to give up and send the macbook to apple.
    So, this is what I did. Since after booting the disc stops turning and the unit goes to sleep, or rather coma in this case, I went into system preferences menu and adjusted so that the harddrive never goes to sleep, nor rests. This page (http://www.macosxhints.com/article.php?story=20051207044615606&query=lingon) motivated me to do so, since this will affect all drives, including the optical one, apparently.
    Turns out, after restarting the computer the ordinary eject button suddenly did the trick!
    Hope your problem can be solved the same way.

  • My iphone won't charge and won't play music anymore. I have tried reseting it and switching it off. Have tried 3 different chargeres and even a car charger. Does anyone know what could be wrong and how I can fix it?

    I have an iPhone 4 not quite 2 years old. 2 nights ago my iPhone was on its charger and it kept vibrating as if it was being disconnected and re-connected from the charger. When I looked at it had an "error" message but now I don't know what that was as it was 3am and I was half asleep. I just diconnected the charger and the battery read fully charged.
    The my volume wouldn't go up or down. The box with "ringer" in it came up but no bars at the bottom to show the volume is increasing or decreasing. It would not play music out of the speakers either even though the screen showed it was playing and it would not work in our dock/speaker unless I used bluetooth and even then, if we touched the volume button on the dock it would switch off.
    I tried a "hard" reset 3 times and tried switching it off and on 3 times with no success.
    I tried 3 different chargers including a car charger, plus the speaker dock with no success.
    It is now out of battery and I cannot charge it.
    The iPhone also would not back anything up prior to the battery going flat.
    I just need to know if it is fixable or do I need to start looking for a new phone?

    Welcome to the Apple Support Communities
    See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801

Maybe you are looking for

  • Exporting and importing parameters

    Hi, Can any one explain how the exporting and imopting parameters work in case of function call. for example in the folowing code: CALL FUNCTION ‘DOWNLOAD’      EXPORTING           FILENAME     = <default file name>           FILETYPE     = <default

  • PowerPoint: Images not found after joining multiple PPTX to one

    We are using a code block which worked fine in PowerPoint 2007 and 2010: public static PPT.Presentation AddPresentation(PPT.Application appl, bool withWindow) PPT.Presentation presentation = appl.Presentations.Add(ConversionUtils.BoolToTriState(withW

  • Why did my screen size just default to 800 x 600?

    Last evening I ran 'Check For Updates' and after a Adobe Reader update my screen reverted to 800 by 600.  I don't write down what settings I use, I simply have been using whatever is comfortable.  Now I cannot find it. I may have caused the default s

  • 2 facts with different dimensions in 1 logical table

    hello, im trying to accomplish the set up as described per blog: http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html i.e. i have 2 facts, F1: D1 ; F2: D1,D2,D3; i followed the instructions and all seem to be working fine;

  • Getting error when installing CR XI R2 Service Pack 5

    I am getting an error when installing CR XI R2 SP5 (cabinet file m148.cab missing or corrupt). I am downloading it from the Downloads section of the SAP Community Network. Does anyone know where I can get another copy of this service pack?