Iphone 4s and iPhoto problem - please help me!!

Hi there
I have searched the discussion boards for an answer to my problem, but cant find one yet.
I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
Help appreciated!
Thanks a lot
Nick

Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
I did the repair and, thankfully, my missing photos are back.
However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
Do you think that having photostream has complicated matters at all?
Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
THis is a great forum, thanks to everyone for help so far.
Nick

Similar Messages

Hello I put protection on your iphone 4 and forgot about please help, Hello I put protection on your iphone 4 and forgot about please help

Hello I put protection on your iphone 4 and forgot about please help

If you forgot your passcode, read here: http://support.apple.com/kb/HT1212
If you've forgotten your Apple ID and/or password, read here: http://support.apple.com/kb/HT5787
If neither of those helps, let us know. Please tell us exactly what you see on your iPhone's screen, including the exact message displayed.
~Lyssa

I have a iMac 5,1 made b/t 7/23/07-7/29/07 but have OS X 10.6.8 w/ 2GB mem but unable to install Maverick, Garage band and iPhoto. Please help. Thanks!

I have a iMac 5,1 made b/t 7/23/07-7/29/07 but have OS X 10.6.8 w/ 2GB mem but unable to install Maverick, Garage band and iPhoto. Would installing Snow Leopard 10.6.8 make it possible to install Maverick? Please help. Thanks!

The highest OS X version you can install on your model iMac is OS X Lion 10.7.5.
To get to this! you would need to purchase the retail OS X 10.6 Snow Leopard DVD, first.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
OS X 10.7 Lion is no longer available, directly, from the Mac App Store. You need to contact Apple at 1-800-MYAPPLE and ask for retail software sales and tell them you would like to upgrade your Mac to OS X 10.7 Lion and they will give you a special download code to download it from the Mac App Store.

[Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

Hi
I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
My first:
I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
My second:
I want to connect also P-ATA HDD,but BIOS don´t see him.
What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
SATA as Primary Master (system disk)
PATA as Secondary Master
DVD-ATA IDE as Secondary Slave
My last:
What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
ANY HELP WOULD BE APPRECIATED.
Thank you

At the first thank you for your reply.
Yes it works.
Sorry I didn´t post my OS.My OS is XP (with SP2,now).
Configuration:
P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
MSI 865PE Neo3-F
2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
ASUS FX5700 256MB
Maxtor DiamondMax10 300GB,16MB cache,7200rpm
DVD-RW Plextor 716AK
After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
so if I right understand after this settings in BIOS:
Native Mode
ATA Configuration - PATA only (or SATA-only)
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
connections looks like that:
on IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
on SATA cable from SATA1 will be connect HDD SATA?
How system knows which one from two Masters HDD is System disk?from Boot menu?
Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
Sorry for questions,but I am working at the first time with SATA disk

The update and other problems PLEASE HELP!!!

The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
1. I don't receive the messages when trying to get an app
2. It wont let me down load apps when I connect my phone to the computer
(also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

(Apologies for barging in Steve.)
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

Movies and Audio Problem - PLEASE HELP!!!!!

Hi,
If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

Substri and instr problem --Please help

Hi ,
I would like to get the find tablename starts with 'EXP' using substring and instring . I am using oracle 9i. Please help me out
Example : 'Schema.explogtable'
I will use table name ' EXP' in one of my procedure as input parameter to procedure
If tablename= substr('schema.explogtable','instr('schema.explog','.',1,3) then
Execute Procedure1('tablename')
Else
Execute procedure2('tablename')
I would appreciate your help
Regards,
Clarkc

ClarkC,
Here just replace procedure1 and procedure2 with your procedure names;
create table temp_table
( table_name varchar2(30)
insert into temp_table values ('TESTME.MY_OBJECTS');
insert into temp_table values ('TESTME.OBJECTS');
insert into temp_table values ('ABC.ECFOBJECTLOG');
insert into temp_table values ('XYZ.BDEOBJECTTABLE');
insert into temp_table values ('ABC.ABCTABLE');
insert into temp_table values ('ZYD.CLIENTTABLE');
insert into temp_table values ('NMS.CLIENTLOGTABLE');
COMMIT;
pl/sql anonymous blocks I defined 2 variables for readibility and understanding
DECLARE
   CURSOR tcur
   IS
      SELECT table_name
      FROM temp_table;
   table_name   VARCHAR2 (40);
   my_table     VARCHAR2 (40);
BEGIN
   FOR cur IN tcur
   LOOP
      my_table     := NULL;
      my_table     := cur.table_name;
      table_name   := SUBSTR (my_table, INSTR (my_table, '.') + 1);
      IF (table_name LIKE ('%OBJ%'))
      THEN
         DBMS_OUTPUT.put_line ('table_name containing OBJ=' || table_name);
         -- NOTE : CALL YOUR PROCEDURE1 HERE for tables containing OBJ;
        procedure1(table_name);
      ELSE
         DBMS_OUTPUT.put_line('table_name not containing OBJ=' || table_name);
           -- NOTE : CALL YOUR PROCEDURE2 HERE for tables not containing OBJ;
        procedure2(table_name);
      END IF;
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 300));
      RAISE;
END;
Here is the output of the above block
table_name containing OBJ=MY_OBJECTS
table_name containing OBJ=OBJECTS
table_name containing OBJ=ECFOBJECTLOG
table_name containing OBJ=BDEOBJECTTABLE
table_name not containing OBJ=ABCTABLE
table_name not containing OBJ=CLIENTTABLE
table_name not containing OBJ=CLIENTLOGTABLEHope this helps
Regards
Edited by: OrionNet on Jan 17, 2009 11:48 AM

Itunes connection and Passcode problem (Please Help!!)

So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

IPhoto problems--PLEASE HELP!!

As I was downloading and organizing my digital pictures into my iPhoto application, I began receiving the message that my start up disk is almost full. I bought an external hard drive, hooked it up and proceeded to try again. As I was creating albums, and trying to find my pictures which seemed to have been dispersed in many different folders when it apparently crashed, it crashed again. Currently, I have all of my pictures in various folders on my external hard drive and no pictures in my iPhoto, though the album names have remained.
Before I purchased the external hard drive, I went through all of my applications and deleted as many as I thought I didn't need. I'm hoping I didn't delete something I needed. I also dragged my iPhoto applilcation into the external hard drive thinking that the reason it kept crashing was because there wasn't enough memory. However, that didn't seem to work either. Is there another way to transfer the application to the external hard drive? Is that even necessary? I have over 1000 pictures, and I only have 2 GB left on my internal hard drive.
Since I'm obviously not terribly computer literate, I'm not sure what the problem is or what to so about it. Any help would be GREATLY appreciated!!
Thanx! Mroman

Mroman:
Welcome to the Apple Discussions. Can you drag your iPhoto library library to the external HD and copy it? If not then create an "Applications" folder on your external HD and start copying applications to is and then delete them from your boot drive. Keep doing that until you have as much free space or more that what your iPhoto library takes up. Then try copying the iPhoto Library folder to the external HD again. If it copies satisfactorily launch iPhoto with the Option key depressed and when you are asked to locate a library navigate to the external and select the one there. When it opens OK and you can confirm you have all your pictures save in there you can delete the iPhoto Library folder that's on your boot drive.
It is highly recommended that you have a minimum of 15% or 10G free space on your boot drive, whichever is greater. More if possible.
Now you can copy your primary applications back to your HD, keeping mind the minimum free space recommendations. Then delete them from the external. One way to regain some real estate on your boot drive is to run DeLocalizer and remove any of the unneeded language modules. I saved nearly 900 MB the first time I ran it.
You didn't say how big your boot drive was but if it is fairly small and you have a large iTunes library you can also move that to the external and run it from there.
Do you Twango?

Nokia E61i and iSync problem - Please help!

I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
Please I need someone to help me resolve this problem.

This Apple Tech Support Document seems to mention exactly your error:
iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

Iphoto problem please help!

right i have a problem with my iphoto!!
i came on to my MacBook Pro a couple of days ago and all my photos have gone of my iphoto
i do not have any of my files backed up
is there anyway i can retrive my photos as i had well over 3000 photos and all my photogarphy pictures have gone!!
definaty going to buy a timemachine..!!

you are a god!
thank you ever sooooo much
much appreciated...
regards hannah

App Store, Safari, and Netflix Problems, please help

Im showing a strong wifi connection with my ipad 2, but when trying to access itunes or the app store, the pages wont fully load. Some of the thumbnail images will only show ? Marks and sometimes page wont even load at all until i try it again. Same happens in safari and netflix. My iphone 4 is working fine however when just on wifi. Ive tried resetting network, hard resets and a bunch of other tricks, but nothing working. Some apps are working fine, but why would this be happening with itunes, safari, and netflix? Does anyone have a solution?

I see you wrote your question at 1:05 AM. Chances are it didn't get read much as some of us who spend a great deal of time here helping people, just might have been asleep. Sarcasm won't help you much.
Now, have you actually fully closed the apps, then reboot? To fully close the apps, go to your home page, then double tap your home button to bring up the task bar (most recently used apps). Hold your finger on any of the recently used apps until they all start to jiggle. You'll see a on the top left of each app. Touch the minus on each of the apps you're having trouble with to fully close them. Then touch your home button once more to stop the apps from jiggling and then again, to return to your home page.
Then, do the hard reset (in case you didn't do it properly). Press and hold BOTH the home and power buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
Try the apps after your iPad comes back up and hopefully, they will work correctly.

G580 Very slow, and mouse problems, please help

I purchased a brand new G580 approx 2 weeks ago.
It has 4GB of memory compared to my old lenovo which had 2GB. This new one runs at half the speed of my old one and has nothing on it (i.e pictures, music, vids etc)
If i open a programme to do something and then open another, it cannot cope with it and will take forever to do anything on the 2nd programme when it eventually opens.
also the mouse wanders! I dont have to be touching it or doing anything near it, it just wanders across the screen which is getting very annoying.
Please could somebody help me?

Hi kiri_tc,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your G580 Laptop is not performing as expected and the cursor is moving erratic, re-installing the Touchpad driver should resolve this issue and let me know the OS (Operating System) that is installed in the computer and the country where the computer was purchased, also the Type of G580 for providing the steps to resolve performance issue and exact touchpad driver link. Below is the link to locate the model number and Type of the computer which is mentioned on the sticker at the base of the Laptop.
How to find the Serial Number (S/N) and Type of your computer
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

Hello,
I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
So, I can't actually even attempt to install with no destination.
any help would be most appreciated.
thankyou

suzannah-a:
Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
If your HDD shows up follow these directions to reformat and erase:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
Please do post back with an update on how it goes, and with further questions or comments, if any.
cornelius

Nested Repeater and Binding Problem - Please Help

I have nested repeaters and binding seems to work with the
outer repeater, but not with the inner repeater. I have boiled it
down to a pretty concise case. If someone could offer hints I would
be most appreciative!
I understand the objects I am using to store data could be
different, but it only looks strange because I had to boil down a
complex case to a simple case.
Type a user and then an email address then click to add them,
the user TextInput and label gets created, but not the email
address label and text input.
Basically I want users in an ArrayCollection, and their
multiple email addresses in an ArrayCollection stored in an Object,
where I get that email ArrayCollection using the user as the key to
the object acting as an associative array.
The attached code should compile fine, so please have a go at
this. Thanks!

"Greg Lafrance" <[email protected]> wrote in
message
news:gn5p1k$cv9$[email protected]..
>I have nested repeaters and binding seems to work with
the outer repeater,
>but
> not with the inner repeater. I have boiled it down to a
pretty concise
> case. If
> someone could offer hints I would be most appreciative!
>
> I understand the objects I am using to store data could
be different, but
> it
> only looks strange because I had to boil down a complex
case to a simple
> case.
>
> Type a user and then an email address then click to add
them, the user
> TextInput and label gets created, but not the email
address label and text
> input.
>
> Basically I want users in an ArrayCollection, and their
multiple email
> addresses in an ArrayCollection stored in an Object,
where I get that
> email
> ArrayCollection using the user as the key to the object
acting as an
> associative array.
I wouldn't bind to methods like that...I'd make properties
and bind to
those.

Iphone 4s and iPhoto problem - please help me!!

Similar Messages

Maybe you are looking for