IPhone 4S battery drain! after update is even worse, iPhone 4S battery drain! after update is even worse
iPhone 4S battery drain! after update is even worse, iPhone 4S battery drain! after update is even worse
Settings -> General -> Backroung App refresh
Either selectively disable the ones you do not need, or just disable the feature altogether. Esepcially for apps that would be using location services, this has the potential to be a huge battery drain.
Also, in Privacy under Locations services, system services, disable at least the "popular near me" and "location based iAds" - both of these use location services a lot as they try to track your movements in real time. You can disable everything in system services if you wish (won't harm anything).
Similar Messages
-
IPhone 4s got problem after I update to 7.1.1. Battery drain so fast
iPhone 4s got problem after I update to 7.1.1. Battery drain so fast
The Ultimate Guide to Solving iOS Battery Drain
<http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain> -
My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743 -
Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!! -
Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me what to do.
I final piece for me in the jigsaw following on from this
http://www.care4pcs.co.uk/2012/10/how-to-be-happy-gmail-user-on-iphone-or.html
is to turn off wifi when you do not need it. When I leave the house I turn off wifi, because the majority of the times when my iPhone has got very hot and crashed is when I am away from home. I suspect that if the iPhone is in the vicinity of public wifi (wheather secure or not secure) it will try and connect, even if you have 'automatically join known networks' set to off. This is easy of course if you have an unlimited data contract for your iPhone. I may be wrong, but it is working for me. It makes sense for me because it is another way of reducing the work the processor (and battery) has to do and therefore reduces the chance of overheating.
Having said that, I never had this problem with my iPhone 4. I now have a 4S.
Try it. Hope it works for you. -
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?
Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W. -
After I updated to iOS 5, my computer does not detect my iPhone 4. Not only that, all my backed up data was erased. =/ I cannot even sync my iPhone if it is not detected. What can I do? The USB ports are working. It is fully charged. I have restarted the phone and computer various times. But nothing works.
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
Iphone 5 battery drains rapidly, I have turned off apps and location even purchased a new battery, is anyone else having this problem? If anyone knows how to fix please let me know. I've tried the hard reset and nothing works.
There was a run of bad batteries for the iPhone 5. Apple will replace them if your phone qualifies and you haven't tried to fix it yourself. See: iPhone 5 Battery Replacement Program - Apple Support. Unfortunately, you may have disqualified yourself if you tried to repair it yourself.
However, rapid battery drain is only rarely caused by a bad battery. A bad battery is usually diagnosed by a battery percentage that jumps randomly. See this for advice: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain -
I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing works. Kindly help me out how to solve this problem.
Hi Sameer alamgir!
Here are two articles that can help you troubleshoot these issues with your Wi-Fi and Bluetooth connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
Battery is draining twice in a day on iPhone 4S post iOS 7.1 upgrade
Battery is draining twice in a day on iPhone 4S post iOS 7.1 upgrade
I'm having a similar issue with my 4s. I did the update yesterday, restoring as a new phone. That afternoon, immediately after finishing the update, the battery was draining at about 1% a minute, with the only usage being listening to an audio book through my bluetooth headset for about 15 minutes, and simply carrying it in my purse for about 30 minutes.
I tweaked all the usual battery maximizing settings, charged it back to 100% and it was behaving normally the rest of the evening. I did not charge overnight, and it was at 47% this morning -- typical for when I forget to put on airplane mode and it spends the night searching in vain for a cell signal.
While driving to an appointment I charged it on my car charger. It got to 97%. While waiting at my appointment for ~ an hour I listened to an audiobook through the headseat and played a couple of games. Battery got down to 5% in that time, and the phone was hot. Not excessively so, I don't think, but definitely way above normal.
Given that I installed the 7.1 update by restoring as a new phone from the get-go, would your recommend I do it over, or try something else?
Thanks. -
my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me
After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
[Iphone 5] update to ios 6.0.1 - battery issue, fix please :(
I have already turned off Siri, Location Services, Notifications
After update to iOS 6.0.1, battery drain very quickly
Something wrong with my phone?My recommendation having tried all the obvious is send the iPhone 5 back to Apple - Wait for Apple to fix the problems and then buy a new iPhone 5.
I have been buying apple products for over 25 years, I never experienced such a fundamental problem.
Battery drain: 100% to 40% in 4 hours - 100% to 10% 12 hours overnight on standby - with wi-fi off (installed with the same Apps as the 4s with lasted 3-4 days in general use.)
Apple support are either very helpful, or totally dismissive... this morning I was offered "12 hours use is acceptable" as a final word from Apple Support.
The phone is on its way back to Apple, and I'm happily back on my 4s
This is the first and last time I break my purchasing rule when buying from Apple, 'never buy the first version of any Apple product - wait for them to get it right.
Maybe you are looking for
-
Hi I have an issue in which the Dep start date for Dep area tab for a particular dep area 15 is shown in display mode for asset master. How can i make it modifiable Regards Sanil Bhandari
-
Problem with subrpt links in crystal reports 8.5 (cr 9 and 2008 installed)
I am trying to add a subreport to an existing CR 8.5 report. I currently have Cr 8.5, cr 9 and cr 2008 on my pc (xp). The subrpt is pointing to a sql 2005 stored procedure that has a parameter (@vvcrCono). When I try to set up the link, the parame
-
Thread local variable causes JVM crash through JNI
Hi All, My team developed a JDBC driver which uses some native C codes. (Compiler: cl.exe, O/S: Windows XP) I found that JVM crashes at specific point. So I used debugger(Visual Studio 2005) to find the position. ==================File1.c============
-
SPAM/SAINT - OCS package does not match current software component vector
Hello Experts, This could happen on any type of system I suspect, but it is on my Solution Manager (7.01 on Eh1). I downloaded a support stack (27)and was checking the components requirements. I use the Directory box in SPAM, and I go into New Supp
-
Background processing in ALV Oops
Hi all, I have requirement to execute a report in background processing.I have to create report using classes. Iam using class cl_gui_alv_grid for creating report.When iam executing report in background am getting Fatal errror-GUI can not be reache