IPhone 5 buttons not working after update

After updating to 7.0.2 yesterday, the home and power button of my iPhone 5 stopped working and they are no more responsive, anyone has an idea? No mean to restore it back to the default settings because iTunes asks me to deactivate the Find my iPhone which I can't access as the buttons are not working.

Me too. All of the sudden I realized the right hand side of the power button stop responding, only the left side works. I may have to restore back to 7.0

Similar Messages

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Volume button not working after update ios..

    My iphone 4s volume down button not working after i upgrade to ios 6.0...and then i update to ios 6.0.1 its still not working...plz help...what happen...???

    Settings > Sounds > Change with Buttons... Make sure this is set to ON.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement.

  • Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

    My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
    Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

    As stated...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

  • Ipad home button not working after updating to iOS 4.3.3

    my ipad's home button was working fine until i updated the software to iOS 4.3.3. today. now it is completely unresponsive and it is rendering my ipad unusable.  is there any way to fix this problem?

          This link may help you. Ipad unresponsive or not sycning!

  • 4s sleep/wake button not working after updates

    My 4s sleep/wake button just stopped working. I can't reset the phone by holding sleep/wake and home key.  Did the 6.1.2 update minutes ago which resets the phone and still not working!  Thoughts/suggestions? Anyone else having this problem????

    Ok, that is a relief. Thank you! 
    Out of curiousity, under what conditions would this still be true? What if they determine it was not a manufacturing defect (e.g., liquid damage, it fell, etc)?

  • IPhone 4 does not work after update

    Hello!
    My sister who lives in Germany found her old iPhone 4 32GB after about 2 years and because my phone broke down, she gave it to me. First, there was a small problem with the battery, but after 2 days on charger, everything was fine. I decided to restore and update it, because the iOS was probably 7.0.4 or even lower. After the update to 7.1.2, my phone wanted me to choose country and language (i live in the Czech Republic) and after that, connect it to iTunes.
    The problem is that when I connect it, iTunes writes "There is a problem with your iPhone"
    and thats it. I have already tried "everything". My friend tried to jailbreak it but it didnt work. There was no jailbreak before the update and it should not be blocked.
    Here, this man has the same issue: https://www.youtube.com/watch?v=Mr1jqkz-Hco
    I would be grateful if anyone could help me!

    Hi Mark, 
    I'm sorry to hear you are having this issue with your iPhone. Based on your description of the issue and the error message you are getting, it sounds like you may need to have your iPhone serviced, or at least evaluated. You may find the information on the following page helpful:
    Apple - Support - Service Answer Center
    Regards,
    - Brenden

  • IPhone 5 microphone not working after updating to iOS 7.1.1

    After my phone updated my microphone stop working during phone calls . I have to put the phone on speaker in order for the other person to hear me..
    It works fine whole using Siri , but not with voice memo app... This has to be a software issue because I replaced the mic and still having the same problem..
    Any help on this would be greatly appreciated.

    Sinistersosick wrote:
    Wow you sound really hurt ... The issue is this problem occurred before the opening of the phone ...
    No, I am enjoying my iPhone, thank you very much.
    It's too late for you now, your experiment back fired.

  • My iphone 3g does not work after updating the software through itunes

    Some days ago I made a security copy of my iPhone 3G at iTunes. Today when I conected my iPhone to iTunes I had a message saying I had to update the software of my phone. I accepted and after around 30 minutes of update I got another message saying there had been a problem restarting my phone. The screen of my mobile was showing the iTunes icone and the USB icone and I can't access to the content of it. So I disconnected the mobile from iTunes and connected it again and I got another message saying iTunes has detected a mobile phone in recovering process and it says I have to restaure the iPhone to be able to use it in iTunes. And, by the way, before all this when I connected my phone to iTunes the iTunes recognized the name of my mobile. It doesn't anymore, it just says "iPhone" on the left column.
    My question is: Should I restaure the iPhone? Will I be able to recover the security copy I made some days ago? Where can I access that copy?
    Thank you so much in advance!
    B

    You're welcome.
    Already answered.
    When restoring the iPhone with iTunes, the iPhone is completely erased first folllowed by the current iOS version being re-installed. After iOS is reinstalled, you are prompted to restore from your iPhone's backup, which is the default selection. The other available selection is to restore as a new iPhone or not from the backup.

  • Contrast button not working after updating to Yosemite.

    I have Macbook Pro Mid 2012 version. I just updated to OS X Yosemite and I noticed that contrast button on keyboard is not doing anything. It shows an error like in this picture

          This link may help you. Ipad unresponsive or not sycning!

  • Reset button not working after update model

    <af:commandButton type="reset"/> works fine before update model (user submits form). But after that, it doesn't work. So how do I reset a form to previous state after model updated. For example, user wants to reset the form when there are validation errors.
    Thanks.

    Hi,
    reset only resets values entered before submit. If you need to undo entries after submit, you need to change this on the model. In ADF BC, you can access the Row and call a method to refresh it with DB forget, in which case the original values are added from the database
    Frank

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

Maybe you are looking for