Iphone 5 not recognized on macbook

It does not show up in iTunes, finder, iphoto or image capture.  The iPhone beeps when it's plugged in to the macbook (like it does when the charger is plugged in).
I tried restarting the phone, restarting the macbook, both USB ports.  I don't sync it frequently, but I have sync'ed in numerous times before.  It just stopped being recognized. 

Try this support document http://support.apple.com/kb/TS1591

Similar Messages

  • IPHONE 4 NOT RECOGNIZED BY MACBOOK AIR

    I recently rebooted my iPhone 4 and also updated my macbook air to the latest software update. Now, my iPhone is not recognised by my mac and by my iTunes .I've tried restarting and ect. What can i do?

    iOS: Device not recognized in iTunes for OS X - Apple Support

  • IPhone 4s not recognized by MacBook Pro nor iTunes

    I am currently running iOS 6.0.1 on my iPhone 4s and OS X 10.9.4 on my MacBook Pro Retina Late 2012. I recently reformatted my computer by means of a bootable OSX installer and I did a completely clean install. For some reason, my iPhone is able to charge, but not recognized by my computer nor iTunes at all. Nothing comes up.
    I have followed the directions in the following:
    http://support.apple.com/kb/TS1591?viewlocale=en_US
    and
    https://discussions.apple.com/message/24169239#24169239#24169239
    Neither solution seems to be working. I have done the following:
    reinstalled my iTunes multiple times
    reset my networking on my iPhone a few times
    restarted my computer
    updated all my software
    checked to make sure USB cables work
    tried multiple iPhone charging cables
    I'd greatly appreciate some guidance in regards to this. Thanks!

    Ralph Landry1 wrote:
    When you say a bootable OS X installer where did you get the installer?  Is it one you created yourself?
    You might want to try restarting the MacBook Air holding the Command and R keys.  From Utilities on the menu bar, choose Install Mac OS X.  That will reinstall using an installer from Apple.  Install and see if that changes the behavior.
    I did the following from this website:
    http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
    Option 1: Use createinstallmedia
    Hidden inside the Mavericks installer is a Unix program calledcreateinstallmedia, provided by Apple for creating a bootable Mavericks installer. If you’re comfortable using Terminal, it’s a relatively simple tool to use. The program assumes your account has administrator privileges.
    Note: This method does not work in Snow Leopard. It works only in Lion, Mountain Lion, or Mavericks. (The resulting installer drive will let you install Mavericks over Snow Leopard, but you can’t create the installer drive while booted into Snow Leopard.) If you need to create a Mavericks install drive while booted into Snow Leopard, you should use the Disk Utility instructions, below.
    Download the Mavericks installer from the Mac App Store and make sure it’s in your main Applications folder. (This means that if you followed my advice to move the installer out of your Applications folder, you’ll have to move it back, at least temporarily. The Terminal command I’m using here assumes the installer is in its default location.)
    Connect to your Mac a properly formatted 8GB (or larger) drive. Rename the drive to Untitled. (The Terminal command used here assumes the drive is named Untitled.)
    Select the text of this Terminal command and copy it:sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Launch Terminal (in /Applications/Utilities).
    Paste the copied command into Terminal and press Return. Warning: This step will erase the destination drive or partition, so make sure it doesn’t contain any valuable data.
    Enter your admin-level account password when prompted.
    The Terminal window displays the progress of the process, in a very Terminal sort of way, by displaying a textual representation of a progress bar: Erasing Disk: 0%... 10%...20%... and so on. The program then tells you it’s copying the installer files, making the disk bootable, and copying boot files. Wait until you see the text Copy Complete. Done. (see the screenshot below), which could take as long as 20 or 30 minutes, depending on how fast your Mac can copy data to your destination drive.
    You now have a bootable Mavericks-install drive.

  • Iphone 4s not recognized by macbook or itunes after upgrading to  mac ios 10.8.5 and itunes 11.1

    recently upgraded my macbook to mountain lion os 10.8.5 as well as itunes 11.1. iphone 4s is currently at ios 7. Immediately after upgrading my computer i attempted to sync my iphone and itunes started bringing up error messages about my cloud storage and how my iphone had some sort of authorization issue, which is strange seeing as ive never had another apple account. next thing i know my device isnt even being read by itunes. tried unplugging it, using a different cord, reseting comp etcetc all the simple stuff and still no luck. it is not just itunes as my iphone is not even recognized as a device in my finder. i even restarted my iphone completely even knowing i wouldnt be able to get my music back on  it if this attempt failed and what do you know nothing changed after the restart. so now im left with no music and photos on my phone and am completely frusterated. please help

    recently upgraded my macbook to mountain lion os 10.8.5 as well as itunes 11.1. iphone 4s is currently at ios 7. Immediately after upgrading my computer i attempted to sync my iphone and itunes started bringing up error messages about my cloud storage and how my iphone had some sort of authorization issue, which is strange seeing as ive never had another apple account. next thing i know my device isnt even being read by itunes. tried unplugging it, using a different cord, reseting comp etcetc all the simple stuff and still no luck. it is not just itunes as my iphone is not even recognized as a device in my finder. i even restarted my iphone completely even knowing i wouldnt be able to get my music back on  it if this attempt failed and what do you know nothing changed after the restart. so now im left with no music and photos on my phone and am completely frusterated. please help

  • Iphone 4 not recognized on macbook

    not sure why, but suddenly my macbook isn't recognizing my iphone - iphoto isn't opening automatically as it usually does and the device isn't showing up in my system network preferences...wth?

    Hello,
    I found an article that outlines quite a few troubleshooting steps for the issue you've encountered.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    It recommends to start off with the iPhone Troubleshooting Assistant. If the issue persists after following the troubleshooting assistant, continue with the steps below, testing to see if the issue is resolved after each section.
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch. iTunes 10 and later requires Mac OS X v10.5.8 or later.
    Update to the latest version of iTunes and Install software updates on your Mac.
    Check USB connections. iOS devices require USB 2.0 to function properly. If you are not sure if your Mac has USB 2.0 ports, refer to the computer's specifications. Disconnect other USB devices, and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    Mac OS X v10.6.8 or earlier only: Reinstall the Apple Mobile Device Service.
    Additional Information
    In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.
    Cheers,
    David

  • IPhone 4S not recognized by MacBook Pro

    Mac OS X Lion - Version 10.7.4
    iPhone 4S
    Tried troubleshooting all over the internet on this one and have finally given up after countless attempts. Any help here would be greatly appreciated.
    So my iPhone 4S works fine with one exception, it will not take a charge or sync on my MacBook Pro anymore. Not sure what I did (or what update did it) but I'd like to fix the issue if possible.
    I have an iPod shuffle, iTouch and iPad 2, all of which sync fine on the MacBook Pro.
    The iPhone 4S charges in my car, through all wall outlets and is set up on iCloud and syncs fine with iPhoto, iCal, and any purchases made on iTunes. The big reason I need to get this fixed is to move the videos I have on my iPhone onto my MacBook.
    I've tried different cords, restarting both the MacBook Pro and iPhone, resetting the iPhone etc. etc.
    I'm at a loss other than taking the iPhone and MacBook into an Apple store. I feel like I've read countless threads on this same issue but no real fixes.
    Does anyone have a solution?

    Thought I would add a quick update.
    I tried plugging my iPhone 4S into a different MacBook Pro and no response there either.
    Safe to assume it's the phone at this point???
    Think I may just take it to the Apple Store if nobody has any ideas.

  • IPhone Camera not recognized by MacBook Pro

    My camera is neither being recognized by Image Capture, nor by iPhoto.
    This was working fine (iPhoto auto-launching to download the camera roll) before my vacation, and now I have 1000+ pictures on my iPhone that I want to download.
    During my vacation I changed timezones, used airplane mode, etc.
    Is there any way to get all of these photos off my iPhone without wiping the entire thing?
    The whole phone still works properly, it still takes photos (I'm up to 1094 now).
    Thus far I've tried rebooting everything, turning the iPhone off for a while, letting it be plugged into my laptop over night... Nothing works so far.
    MacBook Pro   Mac OS X (10.4.10)  

    When I plug in the iPhone, I get the following in the console.log:
    Jul 23 10:59:19 Crainte kernel[0]: USBF: 3331.256 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
    Jul 23 10:59:31 Crainte kernel[0]: USBF: 3343.257 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
    Jul 23 10:59:43 Crainte kernel[0]: USBF: 3355.258 AppleUSBEHCI[0x3839000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
    Perhaps the camera device is timing out somehow...
    I'm going to drive out to an Apple store to see if they can download the photos for me... and then maybe try a restore...

  • I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

  • IPhone 5 not recognized by iTunes 12

    Hello all,
    I have an iPhone 5, I'm running iTunes 12.0.1.26 and Yosemite (OS X 10.10.1). Over the last few days, I've noticed that my iPhone is not recognized by iTunes or even Yosemite itself. I have already tried everything in this doc: iOS: Device not recognized in iTunes for OS X - Apple Support, to no avail. I've been combing the communities and Google to no avail. Does this mean I need to try a manual restore on the phone? Any other solutions?
    Thanks
    Gina

    I was able to uninstall and reinstrall iTunes, but my Iphone does not appear in iTunes, nor in Windows Explorer on my Windows 7 desktop. But it does appear in both iTunes and Windows Explorer on my laptop which runs Windows 8... How can I get it reconginzed on my desktop?

  • TS1538 my iphone device not recognized in iTunes for my new Windows 8 computer

    my iphone device not recognized in iTunes for my new Windows 8 computer

    Hello kwesiaddai,
    I understand that your iPhone 5 is not recognized by iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • HT201302 iphone is not recognized as an accessible device by your windows 7 or 8 pc?

    Despite the fact that itunes has no problems accessing the iphone nor does a 3rd party paid app like "iExplorer", the iphone is not recognized as a device by Windows (7 and 8). The support bulletin referenced is inadequate.

    Hi James,
       I'll give you steps so it'll be easy to read.
    I suggest having your phone plugged into a working USB during this process.
      1. Open up your Device Manager (run/use command line devmgmt.msc or look for it by sliding open your charm bar located on the right of your computer screen, selecting PC Info, and then on the left hand side of your PC Info window, click "Device Manager"
    2. Once you are in your device manager, look at the above tab (It should say File, Action, View, and Help) and Click View. Click "Show Hidden Devices"
    3. Look for "Portable Devices", and click it. There should be something similar or exact to "Apple iPhone".
    4. Right click it, and select "Update Driver Software..."
    5. Click "Browse my computer for driver software"
    6. Click "Let me pick from a list of device drivers on my computer"
    7. Click "Show All Drivers", then click "Next"
    8. Click "Have Disk"
    9. Type in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    10. Click "Browse", there should be a file that says "usbaapl64" RIGHT click it and click "Install"
    11. From there it should install. Open iTunes to make sure.
    Please let me know if my directions are not clear enough, it took me some time to figure out what I was doing myself. I wish you the best!

  • TS1814 my iphone is not recognized by itunes as a device.  it is the 53 and has newest software installed.  what is the likely problem?

    my iphone is not recognized as a device on my itunes account.  It is a 5s with 7.0.4 system

    See this support document http://support.apple.com/kb/TS1538

  • My iphone is not recognized by itune software?

    My iphone is not recognized by itune software?

    Using Windows? Follow the directions here:
    http://support.apple.com/kb/ts1538

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for

  • Vendor Down Payments Control

    Hi,      I want to implement a validation for Vendor Down Payments. When a user enters a PO line item into a down payment document, I want to check if the amount of the PO's line item is greater then the down payments line item. Where can I set this

  • How do I remove or add pages to a PDF file?

    I have scanned a file of 93 pages and need to remove 2 pages and add 6 pages. How can I do this with my MAC? Thanks!

  • I do not know why but my apple ID WORKS IN THE LAPTOP BUT NOT IN THE IPOD TOUCH

    I can use it in the laptop but not in my Ipod touch!?

  • C3 so-called live community feed / update

    Hi, I have problem with the communities widget at home screen.  All the time, it will only display "What's on your mind?" with my own profile picture. It never receive any updates. I have subscribe to unlimited data plan.  I also have set the below:

  • Html code in JButton not working

    hi all, i wrote html code in JButton,but it's not working,it is displaying all the code what i have placed in the html tag.this message is displaying in button. "<html><STYLE=\"font-family: Dialog; font-size: 12pt\"><center>Current<br>Date</center></