IPhone 5 not working with car USB after iOS8.2 update

Hi,
After upgrading my iPhone 5 (32GB, 8.9GB free, model MD299PP/A) to iOS 8.2 (12D508), it doesn't work as usual when connecting to my car's USB port. Before upgrade, I can still see the track names or podcast info in my car stereo display, and can use the navigation controls to select songs. Now, my car stereo display says "iPod NO MUSIC" or "iPod ERROR READING", and can't use the nav controls, although the sound is still coming out of the car speakers.
The above error is seen on my Toyota Corolla Altis 1.6G, so I tried it in my Ford Fiesta 1.5 Sports. Same problem, the dashboard says that "ERROR READING FILE".
I then connected my iPad Air (iOS 8.1.3), and it works well with both cars.

Howdy emoy81,
It sounds like you upated your iOS device to 8.2 and now you are unable to listen to your iPhone through your car due to this error message. I would recommend usin these troubleshooting steps from the following article:
Get help using your iPhone, iPad, or iPod touch with your car stereo
Troubleshooting tips
Try these troubleshooting tips.
Beginning playback and controlling music
Some car stereos might require that playback be started or controlled from either the device or the stereo. Ensure that your car stereo is set to the proper input for your device. If it is and you cannot hear sound from your car speakers, try switching to your radio and then back to the proper input.
When using adapters to connect to your car stereo, you might notice variations in audio quality. When possible, use a shorter connection to the car stereo or try a different cable or adapter.Disconnect and restart
If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.Isolate the issue
Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
For example, if you hear static coming from the left audio channel, try connecting a different device or try connecting to a different stereo or accessory that connects over the same interface (30-pin or Lightning connector, Bluetooth, or headphone jack).Restore iPhone, iPad, or iPod touch
If you have isolated an issue to the device, restore iPhone, iPad, or iPod touch to its factory condition. You should rarely need to use this step with an accessory issue. If the issue affects only a third-party accessory, contact the accessory manufacturer before restoring your iOS device.
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

  • IPhone 3G does not work with car integration after 2.2 update

    I just upgraded my iPhone 3G with the new 2.2 software update and now it doesn't work with my car integration. Very frustrating... I have a 2009 Honda Civic that has a USB interface. Before the update I was able to charge and play music through the USB interface. In addition, I could also control the music through the stereo. After the update, it says not compatible and it doesn't even charge the phone anymore. Doesn't anyone have the same problem or know how to fix it? Street view is cool but i will definitely revert back to 2.1 if I can't fix this...

    I am having the same problem here After updating to 2.2 the iPhone has stopped working in the car. The stereo just simply refuses to see it. The car in question is a brand new 2009 VW Polo Match, which I know is not as fault as tried it with a iPod nano and worked fine.
    Is reinstalling the firmware only solution to this? Do we know the cause yet?

  • Iphone not working with car headunit

    I have a JVC KW-NX7000 installed in my 2004 Subaru WRX wagon. I must say the head unit is amazing, i love it! I just recently bought a Iphone 3g. I read all the info about both the head unit and phone and then bought a JVC KS-U30 audio/video cable.
    I can not get the head unit to see the phone. Just keeps telling me no USB device but will charge the iphone. Thought it might be the cable or head unit so tryed a friends ipod touch. That worked perfict. Tryed another friends iphone 3g also with no luck. I have the AV setting on the head unit set to Ipod, is there another setting i am missing-maby one on the phone? Any help would be much appriciated.

    I have a simmilar problem, i have a JVC KD-R606 head unit and seem to have connection issues first thing in the morning or when it's a bit cold it just will not connect, also when i do get it to connect the audio switches over to the Stereo bluetooth connection from the dock connector after about 20 seconds and then have to manually go through the iphone to change the output source to the dock connector, it still works ok when a phone call comes in it switches to the bluetooth automatically and back to the dock connector again, it's getting a bit annoying when it's connecting for the first time and keeps switching speaker source.

  • Bluetooth will not work with car stereo after IOS6

    I upgraded to ios6 and lost a number of Bluetooth  functions with Alpine car stereo  1. Can no longer control playback from head unit. 2. Track info no longer displayed on head unit. 3.  When head unit finds iPhone it no longer begins to play automatically.

    If this is an after market car radio, you can go to the manufacures website, and they should have an update available for your head unit.  Some manufactures dont have it available and you may need to replace and update your head unit.  If this is factory installed, go to your local dealership, and they can do the update for you.

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • I bought the last apple wire keyboard , but it does not work with my usb ..

    i bought the last apple wire keyboard , but it does not work with my usb hub why ?
    the only way it works its when connecting it thrue my powerbook usb ...
    the problem is i HAVE TO USE IT THRUE AN USB HUB ... do you think its because my hub is cheap ? 10 $ .... i 've been told that it comes from the fact that i need an auto-alimented usb hub ...?.
    suggestions gentlemen ?

    I have eyes everywhere. Two of them can see the word "Paris", right below your name, at left.

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • Ipod does not work with new usb

    i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

    tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

  • HT202157 My apple TV is not working with light flashing after up date

    My apple TV is not working with the light flashing after an up date, what can be done?

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • Mouse not working with Boot Camp after 10.5.7 update

    I upgraded to 10.5.7 recently, and now my mouse doesn't work on Boot Camp. It doesn't seem to register, and I can't move the pointer. I tried this with two mice that worked just fine on the Mac OSX side. Any ideas? Has anybody else noticed this?

    I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

  • Import via Drag & Drop not working with LR CC (after Update from 5.7)

    I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
    This does not work with LR CC anymore.
    The longer way via "Import" works fine.
    Any suggestions?

    With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
    What works with your setup doesn't work with mine.
    I attached a screenshot:
    As you can see (cursor) i can't import the file from the file explorer on the right.
    (The file is not already in the catalogue and i am in the library tab grid view mode).
    Using Windows 7 x64 prof Service Pack 1

  • Bluetooth on iPhone 6 does not work with car stereo

    I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
    When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
    1) Incoming calls show my own telephone number, regardless of who calls
    2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
    3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
    4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
    Hopefully this is soon to be solved! Or is there already a solution out there?
    Best regards
    Matt, Denmark

    My iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install  on a Business standard radio set up with e snap in connector for the iPhone
    but not yet an iPhone 6 snap in
    You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
    To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also  plays audio
    The issue is usually with iDrive which BMW do have some issues with

  • Imessage not working with Apple ID after Mountain Lion (neither on iPhone anymore)

    Hi,
    Ive been searching on the net for 2 days in a row hours and hours and decided to place the question here.
    Since updating to Mountain Lion iMessage doesn't recognize my Apple ID anymore, it was working good on the beta.
    When i try to login it says Apple ID and/or Password incorrect. It works fine on the store and iCloud.
    I've tried changing the DNS to 8.8.8.8, did the keychain tricks with deleting the acounts and resetting, tried booting in Safe mode, tried killing the agent in activity monitor and tried deleting the all the iMessage/Agent/iChat files in the preferences directory. I also re installed the Mountain lion update, no go.
    I tried everything on every topic i could find.
    Also iMessage isnt working on my iPhone either anymore, it does send to my phone number but not to my Apple ID email anymore, when i try to login with apple id it says it cannot connect as well.
    Since it isnt working on my iphone and my macbook, i reckon it has something to do with my Apple ID, but i find it weird that it just happened after the update. Ive been using this ID for 3.5 years withouth problems, it's also verifeid.
    Anyone help?
    Thanks in advance
    Etienne.

    HI,
    It should read
    Uploaded with Skitch!
    10:07 PM      Tuesday; October 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Will the iPhone 5 work with existing USB car chargers?

    Just curious (and maybe stupid).

    "4G" is a marketing term, not a technical term.
    The iPhone 5 can operate on any compatible HSPA+ network anywhere in the world. HSPA+ is defined by the ITU as "4G" and is marketed as such by many carriers. The only iPhones I'm aware of that display "4G" in the status bar are those originally intended for AT&T in the U.S.
    LTE is also defined as "4G" and is marketed as such by pretty much every carrier that has an LTE network. When connected to an LTE network, "LTE" should appear in the status bar.
    The frequencies used for LTE networks vary from region to region across the globe. In order to use an available LTE network, the phone you're using must have been sold to work in your region.
    Apple doesn't have to "enable" anything for it to work. All you need is a phone that's compatible with your network, and a plan that allows for LTE data.
    If you purchased the phone from another region, the U.S. for example, it will NOT work on the LTE netwok in your part of the world.

  • IPhone not working with Windows 7. Message asks to install 64-bit version

    Full error message; "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes".
    I have just bought my wife a brand new iPhone 32Gb 3S for Christmas & now it's the most expensive paperweight I own. My wife has also just bought me a brand new 16Gb Nano, which also now comes up with error messages when connected, saying that it faild to load and I need to disconnect it & reconnect it. Naturally, this does not work either.
    I'm running Windows 7 & the current 64 bit version of iTunes, but no matter what I do, the above error message comes up.
    I have uninstalled and reinstalled iTunes, very carefully following the exact process & order as detailed by apple, with no luck.
    Everywhere I look, there seems to be references to a piece of software that should exist on my computer; "Apple Mobile Device Application Support", yet this is not to be found anywhere.
    I have spent over 2 hours on the phone with the Apple techies, with no results whatsoever.
    Can ANYONE assist me as I'm going completely bonkers & am about to storm into the Apple store and demand my money back?

    The MSCONFIG workaround requires I-tunes and I-phone code to be installed on the machine. The problem is that I-tunes will not install on XP 64-bit machines. It will install on Vista but NOT XP. MSCONFIG requires the user to allow code that can't be on the machine until it's been installed! Apple staff have confirmed this to me over the phone after I spent half a day trying to figure it out.
    There is an option, which I know some Apple staff are aware of, which has been set up by a Japanese kid and can be found here:
    http://sites.google.com/site/yukichigai/iphonex64
    There are also a couple of 3rd party I-pod readers which, if I name them, will probably get me kicked off the list. Why the f*ck can't Apple sort this out. XP 64 bit has been around for FIVE YEARS!!!

Maybe you are looking for

  • Error while approving the request ..

    Hi , I have created a SOA composite where in the 1st level approver is manager and second level approval is a role . When i raise the request the task is assigned to the manager and manager approves it . Then the task is assigned to the Role . Howeve

  • Dynamic Label creation based on Dictionary Table

    Hi Experts, I am having one requirement to create dynamic lables and fields for a table in my application . But it should be generated according to the dictionary data type which i have defined . It should fetch tham through sql query . I have the qu

  • Windows Server 2003 R2 on MacBook Pro?

    I've spent some time on Google and it seems some people have installed W2K3R2 with Boot Camp but they have a variety of driver issues. From what I've read the keyboard mapping is the most problematic issue initially? If anyone here in the forum is ru

  • Funky window in iTunes 9 with missing sides

    I am missing parts of my window in iTunes 9. I am missing the bottom of the window as well as the right hand side. The minimize, maximize and exit buttons are missing. I have to use File, Exit to close the application. Also when i try to scroll throu

  • Quicktime Player fails to launch.

    I can't get QuickTime to work whatsoever. Nothing happens when I click on it. What am I doing wrong?