IPhone 6 issue with pictures in my messages.

I let my iphone 6 die last night and put it on the charger to let it charge overnight (like I have done plenty of times before). When I woke up, I couldn't see any pictures in my messages. All the pictures in my messages say "JPEG IMAGE".

Hi there BertieV,
You may find the troubleshooting steps in the article below helpful if you're having issues connecting to a car stereo.
iOS: Troubleshooting car stereo connections
-Griff W.

Similar Messages

Having issues with picture messaging get told to go to settings, then general, then network then cellular data network. my problem is there is no such option my phone is a 3gs

having issues with MMS messaging instruction for setup, are to gotto settings, then general, then network then cellular data network.My problem is there is no cellular data network optiion on this page have tried resetting phone , no good .Help.

That option does not exist depending on who the carrier is.
Who is the carrier? Are they a supported carrier?
Have you tried Settings > General > Reset > Reset Network Settings?

IPhone 3GS with pictures in folder will not sync with iTunes

The problem I have is that when I attempt to connec my iphone to my HP Pavilian dv500 it causes my computer to shut down. I have itunes up and running but the instant I plug the phone in windows shuts down. The blue screen has a message but it closes to quickly for me to read it.
I have call tech suppot and the tech told me it has something to do with having pictures on my iphone. So I reset my computer with no pictures and it will sync up to itunes and I can then do what ever I want to. But if I take a photo with my iphone or move pictures over onto my iphone the next time I attempt to sync up to itunes my computer will shut down. And to be able to sync again I have to delete my photos.
HELP? What can be causeing the problem?
I spent over 6 hours on the phone with tech support only to find out that the tech was not sure what the problem could be and that I was using up my minutes and now have gone over my talk time and have added 100.00 bucks to my phone bill.
What could cause my computer to shut down when attempting to sync my iphone with photos on it?

Could be an issue with an outdated driver - Logitech webcams, Lexmark scanners, etc., cause this. See:
http://support.apple.com/kb/TS1502

IPhone Issues with USB Connection and Bluetooth in GM cars

I recently purchased a 2009 Chevy Cobalt SS/TC and it has a USB connection for an iPod. Prior to the 2.1 updated the USB connection worked flawless as well did my handsfree/bluetooth. I had the Apple Genius Bar check my iPhone for any issues due to a corrupt update but everything turned up fine. When i connect to my car I receive an error message (iPod Did Not Authenticate. Check iPod Version). Also my bluetooth will sync but when you answer the phone using hands free you get no audio from the iPhone or speakers in the car. I used a friends iPod and everything worked fine but when I connect with a new iPod it displays the same error. I have contacted GM but they said talk to Apple.
If anyone can help please let me know.
Thanks

Hey J,
Well you got me thinking about your question, and I guess I didn't get it the first time. Again, I own the same car - 09 Chevy Cobalt SS/TC, Black. A lot of fun! I plugged my iPhone into the radio USB connection and get the same error. The GM radio does not support the iPhone. It will not authenticate. The GM radios' firmware is looking for an iPod, not an iPhone. That is expected. As far as the iPhone and it's Bluetooth, again the iPhone's Bluetooth hands free works fine, except I cannot answer the iPhone during an incoming call without first unlocking the iPhone then pressing the mute button on the steering wheel. For what it's worth the iPhone will charge through the USB connection. I'm a little confused on what you are trying to connect. Bottom line, an iPod should always work, an iPhone, not at all. Lastly, I have purchased the GM Personal Audio Link (PAL) and hope to use it with my iPod so I can put the iPod in the glove compartment. Although I have heard a lot of negative comments and issues with it for being slow and sluggish. If so, I'll be sending it back and I'll stay with the USB connection. I'll let you know how that works.

Gmail App Issue with picture embed in mail body

Hi,
I am an iphone 5 user and have installed the Gmail app from google inc. . But there seems to be an issue with sending emails.
If a new email is composed with a picture copied from the camera roll or other app in phone and pasted onto the email body in the gmail app,
and sent out, the email body gets stripped off the embedded picture.
The sent email in the 'Sent' folder of Gmail app does not display the embedded picture. Is this a known issue with the Gmail app?
Is there any resolution?

Hi.,
First you have to store image in MIME Repository. , then use HTM type to send mail .,
check these : [Send Picture in body of Email|Send an picture to body of an email;
and [Send HTML mail with image|Re: Send HTML mail with image;
hope this helps u.,
Thanks & regards,
Kiran

Safari or IPhone issue with Website ..

Hey guys, .. question..
I have a Win 2003 Server and setup IIS. I've designed a website. Firast I had many *.png and a wallpaper with a size of 500K. I had issues with getting the page loaded, which mean that 2 images were loaded and the rest not. now i reduced each pictures size down to 5K. So the web site will load really quick now.
When I go to my work computer i can access my site without any issues. but the IPhone try to load but then after 5-10 minutes it don't show anything. I connected to EDGE first and then to another WIFI spot to see if it's the connection speed.
So my question, SAFARI on the IPhone do show lots of websites like ESPN or CNN which have a bigger data size but it can't show a simply site that i've made.
what could be the issue? I testd it just now from y work system and it pops up without issues, i also did a cold bootup (IPhone)

flavor4real,
To help narrow it down some, does the page load with Safari beta for Windows on your computer?
Does the page get any errors with tools for validating the HTML of the page? Such as:
http://validator.w3.org/
Have you verified your links to the images are not pointing to your local hard drive, instead of using a URL?
Hope this helps,
Nathan C.

Having issues with face time and messages to connect with people overseas

I seem to have issues with contacting two people who live overseas. I was recently visiting that country and while there had no problems contacting them. Also while en route in /Seoul airport was still able to contact them but when arriving back in -Australia , am no longer able to send or receive messages from them or calls on face time. Similar issues with these contact on viber and talk box. Any ideas?

I seem to have issues with contacting two people who live overseas. I was recently visiting that country and while there had no problems contacting them. Also while en route in /Seoul airport was still able to contact them but when arriving back in -Australia , am no longer able to send or receive messages from them or calls on face time. Similar issues with these contact on viber and talk box. Any ideas?

IPad and iPhone issues with 1242AP

Hi,
We have a 1242 AP (b/g and a) installed at a customer site where they would like to use iPads and iPhones along with laptop PC's for wireless LAN and internet access. We've tried getting these devices to connect and are having problems. Laptops using b/g radios are having no such issues.
I've read about the iPads having problems when trying to connect to APs that support mixed modes (b/g, n). Does anyone have any experience with regard to solving this issue? Should we turn off all the g radio settings in order to force the AP and iPad to connect using the b radio standard? Also, since the iPad doc states that it has support for the "a" radio standard, could we solve the problem with regard to the iPads by turning on the 5 ghz "a" radio in the AP? Right now it is off.
Any ideas or suggestions would be appreciated.
Thanks

My understanding is that when the Apple Devices like iPad, iTouch, iPhone go into sleep mode they actually shutdown the WiFi radio interface which causes the device to obviously disconnect from the wireless and then the user idle timeout on the controller kicks the user off the network. Then when the device comes out of sleep it has to re-enable the radios, then search for networks, then reconnect, and then go thru the authentication process and some time it fails or can get blocked as a result of too many reauthentications. So I generally turn off the exclude client option to minimize the occurance of this. This maynot be the case but it's what i have experienced with them.
Hope this help... Please rate useful posts.
Thanks,
Kayle

Iphone 5 with ios 8 text message issue

My iphone 5 just got back from being at the Apple store for a week for them to fix the lock button issue that was under recall. It now has IOS 8 and when I send texts, they show up with my email address instead of my phone number. I have already checked Settings > Messages > Send & Receive > Start new conversation from: My phone number - and the problem still persists. Can anyone help me fix this issue?
Thanks

Howdy Klausn79,
Welcome to Apple Support Communities.
It sounds like you’re running into a Bluetooth connection issue since upgrading your iPhone 5 to iOS 8.1. The interoperability of devices manufactured by different companies can sometimes be frustrating. Try taking a look at the two articles below, they will resolve most issues like the one you described.
If you can’t use a Bluetooth accessory or car kit
iOS: Troubleshooting car stereo connections
I hope this helps,
-Jason

Autocomplete and linking issues with gchat on apple messages

So I'm having a couple related(ish) problems with apple messages and gchat/hangouts/whatever it's called these days and imessage on my laptop:
1) Gchat contacts sometimes do and sometimes don't autocomplete when i cmd+n for a new message and then start typing in the 'send to' field. this occurs irrespective of whether i try to start a jabber conversation via typing their email or via typing their name. I've noticed a couple of semi-consistent factors that seem to be impacting it, at least sometimes, but can't pinpoint anything entirely consistent:
     -It seems to be more problematic with contacts that I have their (google) email address on their contacts card in my icloud account on my actual computer/iphone (as opposed to not having them linked to a contact, and them being merely listed on my gchat friends list by virtue of being imported when i created the account)
     -It seems to be more problematic with buddies that i have had more recent contact with, so that their existing conversation is closer to the top of the messages window (and plus, even this isn't entirely consistent - sometimes it lets me type and find their jabber account even if i chatted yesterday and it's second or third on the list, other times it just returns no results in the address field, and other times (when they're a contact with email address as well as phone number) it only gives me their imessage account but their jabber doesn't show up and i have to go to my buddy list to find them)
Any thoughts? It's sometimes easier to just do cmd+n and type a friend's name even if i have an existing conversation with them relatively top to the close of the list, than manually finding them in the list or looking at the buddy list or using the search bar. cmd+n typically works at least with imessage conversations, and sometimes even with jabber accounts/gchat, so it doesn't seem like this is merely a feature that doesn't exist.
2) This might be less of a bug and more of a feature, but i'm wondering if there's a way to deactivate it. A lot of my friends have both imessages and gchat, and i have their google email and phone number on their contact card. in this case, apple messages, seemingly arbitrarily, alternates back and forth betweeen gchatting them and imessaging them in the same conversation. it doesn't always correspond to their away/available status on gchat, and even when it does correspond, i'd still prefer to be able to manually override to send an imessage even if they are available on gchat, I'd prefer to just have separate conversations going for imessage and gchat (because a lot of my friends just never look at one or the other depending on whether they are or arent near their computer, so i need to be able to control where the message goes). I do have a separate jabber conversation with John Smith from their imessage, but within the imessage conversation it still sometimes switches to jabber. It seems like this only happens for contacts that have both email and imessaage on their vcard, but i'd prefer not to delete the email address from their vcard just to resolve this issue, since the email address on contact comes in handy for purposes other than gchat. is there any workaround/way to disable this auto-switching between imessage and gchat accounts in the same conversation, while keeping contacts' email and phone number linked on their vcard?
3) Some, but not all, of my android friends show up as having imessage when i type their name to contact via gchat. sometimes it says imessages for their phone number, and sometimes instead for their gmail (or both). With respect to the issue when it happens in phone number form: i've checked their contact cards and their phone number is just listed as mobile (not iphone or anything, though i'm unsure if the category of phone number actually tells the phone whether they have imessage, or if it recognizes (in this case, incorrectly) on its own). Of course the imessage won't actually send, but it's pretty annoying (especially in light of the problem from #1). Is their any way to tell messages that this person doesn't have imessage so it stops saying they do?
Couldn't decide whether to post these separately or together, but since they may or may not be related i opted for the latter. sorry for the length. searched for all 3 and didn't find anything quite on point.
macbook pro, mid-2010, 15"
Mavericks 10.9.2
messages v8.0

Hi,
Re 1)
If a Buddy (Google, AIM or Yahoo) is in the Buddy list as just the ID or Screen Name then broadly speaking they are not in your Contacts list.
As such they will not show a "Real Name".
However any Buddy can be added to the Contacts List even if you don't add a "Real Name"
This in itself can also cause issues as the Contacts app does not create what it sees as Duplicate cards.
i.e. you cannot create two cards with the name John Smith.
It is easier if the ID/Screen Name becomes the "Real Name".
I have three Macs
On each the My Card for myself reflects the Computer it is from and those Cards are synced on my iMac.
Some of the various Jabber and AIM Screen Names are linked to the particular computers.
That means if I type "ra" as the start of my Name in the "to" spot I get this:-
First is a national breakdown service for helping out with cars (as opposed to any other breakdown)
The next is a Buddy that I have hidden.
It lists Apple ID and telephone numbers that it thinks are iMessages compatible (it thinks all numbers are valid) liked to be G4 tower's card.
It continues listing AIM, Jabber, Yahoo and other iMessages accounts as well as the Bonjour contact details.
As you can see some at the bottom are IDs and Screen Names that are not associated with any of the Address Cards.
In these cases my name from part of the ID so "ra" picks then up.
As you can see you should get AIM, Jabber (Google), iMessages and Yahoo account indicated.
That should then lead to 2)
Once in the conversation you can use the "To" spot to change which ID you are calling and therefore effectively change which service you are using.
In this Pic I have chosen to call Myself (easy with multiple accounts)
My iMac My Card has no jabber account listed so you only see iMessages and AIM option listed.
I can "call" my main AIM name (ralphjohnsr) from the other three Accounts linked to this Card.
From your end it may look like a random switch but in fact is most likely from an incoming change by the Buddy/Contact.
You can make the change by using the "To" spot and a drop down
The centralised messages in the chat should tell you of Changes as will the ID in the text field before typing
Re 3)
It will depend on what their Apple ID is.
Some have had @mac.com names for a long time and linked them to MobileMe than more recently iCloud.
Some linked their @me.com names form MobileMe to iCloud at the Change.
Most recently iCloud IDs have been given @iCloud.com emails from the start.
However any email can be used as an Apple ID.
The pic above has my Apple ID partially hidden for that lower iMessages info across the center.
You may find that some people are using their Google ID as their Apple ID AND also using it as both the iMessages registered name and the Google ID in the Messages app.
Lets explain this another way.
When iChat 1 came out Apple joined the AIM service with it (it did AIM and Bonjour which was then called Rendezvous)
At that time Apple entered in to an agreement with AIM that any Apple Issued ID would be a valid AIM Screen Name.
At that time the Apple Service was .Mac and @mac.com IDs were being issued as paid for accounts, Trial Accounts and after while Lapsed paid for accounts.
These all worked as iChat/AIM Screen Names.
Then Apple changed to MobileMe and issued @me.com IDs
The trials only lated until you ended them and the IDs no longer worked in iChat after that as valid AIM Screen Names and nor did lapsed Paid For accounts.
More recently Apple have stopped a paid for Service and moved to iCloud.
At the change you could link Any Apple ID to iCloud and you got an @me.com ID from the iCloud server (it could be the same as the on MobileMe but did seem to be "separate").
Later these became @iCloud.com IDs (Some people have both under iCloud and in some cases linking @mac.com names to MobileMe @me.com accounts for email still continues).
To be clear you could link Any existing email ID to iCloud such as Google ID.
But broadly I am speaking of gaining various Apple Issued IDs over time that may or may not be linked to one account.
These Apple Issued IDs works as Valid AIM Screen Names in Messages. (the iCloud issued ones don't work in iChat 5 or earlier though).
I linked an external to Apple dial-up Email that has been my long time Apple ID to iCloud and got an @me.com ID at first and later an @icloud.com one as well.
I can use these two separately in Messages as Valid AIM names.
Someone using their Google ID as their Apple ID could use it as the iMessages registered Name AND as the GoogleTalk/Jabber entry as well.
This might explain why it looks like they are swapping about.
There can be one other explanation and that is dependent on where they are logged in.
Obviously a GoogleTalk user can log in to the Google web Mail page and use Talk there.
Although I don't use Google+ I presume there is a similar web page to chat from there.
This would limit them to being "On Google" rather than iMessages when they sent a messages to you.
Re GoogleTalk
Obviously Android is Google.
The Account settings at Google incudes the "products" you can link and use from your Account.
Previously with a Google Mail Account that included enabling "Talk" which then allowed you to chat from the Web Mail Page login (or your chosen Jabber able app)
Now Google use Google+ and this seems to give you automatic access to "Talk" to the extent it is no longer something you have to Activate.
I am wondering if using a Android phone is linked to having a Google+ account and that the phone number can be part of that ID set up (similar to iMessages and iPhone Numbers).
If it does it would then depend if the phone is linked to both the Number and the Google ID as to what they can login as in certain situations.
I am not sure I have covered everything but I think I have covered most things.
From what you post I am not sure that there is an issue or not although I have posted what is normal and expected I think there are some fringe things that are an issue.
9:46 pm      Tuesday; April 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Iphone issues with wifi connection?

while connected to my home network internet connection does not work properly.
Most of the time safari will work fine, although sometimes it can say can't connect... but the most annoying of all is that itunes almost ALWAYS gets the "cannot connect to itunes store" error. it will often work ok when i first load it, and then if i click say the updates or seach buttons it will try to load and then fail, or if i try to install an app it keeps saying "cant connect" with the option to retry.. if i retry 10-15 times eventually it might work..
my home network is fine. i have a few laptops that connect to it, and other iphones that connect to my network experience the same problems.
my router is a billion 7500G

i gave it a go last nite, same problem.
this morning i opened the appstore while connected to wifi (with bluetooth on).. and mind you i was probably sitting about 6 metres from the router through a wall so my connection should have been perfect
as i opened the appstore it loaded fine. i click "updates" i get the dreaded "cannot connect to itunes" message. after trying a couple of times i get the page to load eventuall, and when i try to instal an app update, i get the same message with the "retry option". after retrying 5-6 times i couldnt be bothered anymore and gave up.
i should also point out that my internet connection is fine.. adsl2+, which is pretty much as good as it gets here in australia.
to me it seems to be some ort of issue between my billion router and the iphone, being incompatible in some way, whether its configuration or not..
on another forum somebody suggested a while ago that i try to set a static ip for the phone.. did that to no avail..

Issue with page processing - confirmation message & show /hide a button..

Hello,
I am working on a to do list application.
I have events and for each event, I show list of tasks (grouped in reports based on the calculated task's status).
In one region I have a drop down list of events and a Select Event button.
For each task, I had to create a CLOSE option (initially I used a link, but the requester wanted a confirmation before closing the task).
Now I have a checkbox for each task (generated dynamically with apex_item.checkbox(1,task_id)).
Closing a task in my application means to set the end_date to sysdate.
I followed the instructions from
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/check_box.htm#CEGEFFBD. I've created also a button and a process and updated the sql from "delete" to "update".
The process is set: OnSubmit - After Computations and Validations; Run Process Once per page visit (default).
The issue number 1 is that I see the confirmation message (that tasks have been closed) every time I reload the page (the same when I click Select_event button).. not only after I press on that Close_task button..
For issue number 2, I have to mention that I've added a condition to show / hide the Close_task button, only if I have at least 1 task in the report.
The issue number 2 is that I see the button only if I click 2 times on the Select_Event button.. The same is for hide.
I feel like I am missing something very important about how to synchronize different events(buttons clicks), processes..
help..?
Thank you!
Anca

This forum is magic..
As soon as write here, I find the answer!
Issue 1: I fixed it by specifying this: When Button Pressed (Process After Submit When this Button is Pressed) and my button. I miseed this 1st time.
Issue 2: I moved the button after the report.. and now it's working just fine!
I did this about it for some time before asking the question here.. but I just had to write here and got the right answer ;)
Have a nice day!
Anca

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

Issue with XML namespace and Message structure

Hi All,
I am using Oracle SOA Suite 11.1.1.4. I have SOA web service application one-way messaging wherein I keep receiving messages from the third party. The issue I am facing is with the XML namespaces which conflicts with the third party's message structure. The details are as below.
Our Web-service WSDL*
<schema attributeFormDefault="unqualified" elementFormDefault="qualified"
targetNamespace="http://amb.com/cad/RealTimeService"
xmlns:cad="http://amb.com/cad/RealTimeService"
xmlns:avl="http://schemas.com/asiapac/cad/datamodel/avl/1.0.0"
xmlns:evn="http://schemas.com/asiapac/cad/datamodel/event/1.0.0"
xmlns:uni="http://schemas.com/asiapac/cad/datamodel/unit/1.0.0"
xmlns:dvt="http://schemas.com/asiapac/cad/datamodel/divert/1.0.0"
xmlns:sui="http://schemas.com/asiapac/cad/datamodel/suppinfo/1.0.0"
xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.com/cad/datamodel/avl/1.0.0"
schemaLocation="AvlCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/unit/1.0.0"
schemaLocation="UnitCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/event/1.0.0"
schemaLocation="EventCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/divert/1.0.0"
schemaLocation="HewsCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/suppinfo/1.0.0"
schemaLocation="SupplementalInformationCadSchema.xsd"/>
<element name="AvlAuxData" type="avl:AvlAuxData" nillable="true"/>
<element name="AgencyEvent" type="evn:AgencyEvent"/>
<element name="Diversion" type="dvt:HospitalDiversionMessage"/>
<element name="SupplementalInformation" type="sui:SupplementalInformation"/>
<element name="UnitDetail" type="uni:UnitDetail"/>
</schema>
Using SOAP UI tool a HospitalDiversionMessage Request for the above WSDL will look like*
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:real="http://amb.com/cad/RealTimeService" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*real*:Diversion>
<ns:Action>?</ns:Action>
<ns:Open>?</ns:Open>

<ns:Location>?</ns:Location>
<ns:Type>?</ns:Type>
<ns:SubType>?</ns:SubType>

<ns:ExpiryTimestamp>?</ns:ExpiryTimestamp>

<ns:Comment>?</ns:Comment>

<ns:ItemNumber>?</ns:ItemNumber>

<ns:Notifications>?</ns:Notifications>
<ns:CreatedTerminal>?</ns:CreatedTerminal>
<ns:CreatedTimestamp>?</ns:CreatedTimestamp>

<ns:ClosedBy>?</ns:ClosedBy>

<ns:ClosedComments>?</ns:ClosedComments>

<ns:ClosedTerminal>?</ns:ClosedTerminal>

<ns:ClosedTimestamp>?</ns:ClosedTimestamp>
</real:Diversion>
</soapenv:Body>
</soapenv:Envelope>
Now the third party sends a HospitalDiversionMessage in this format_
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://amb.com/cad/RealTimeService" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<ns0:Diversion>
<ns0:Action>?</ns0:Action>
<ns0:Open>?</ns0:Open>

<ns0:Location>?</ns0:Location>
<ns0:Type>?</ns0:Type>
<ns0:SubType>?</ns0:SubType>

<ns0:ExpiryTimestamp>?</ns0:ExpiryTimestamp>

<ns0:Comment>?</ns0:Comment>

<ns0:ItemNumber>?</ns0:ItemNumber>

<ns0:Notifications>?</ns0:Notifications>
<ns0:CreatedTerminal>?</ns0:CreatedTerminal>
<ns0:CreatedTimestamp>?</ns0:CreatedTimestamp>

<ns0:ClosedBy>?</ns0:ClosedBy>

<ns0:ClosedComments>?</ns0:ClosedComments>

<ns0:ClosedTerminal>?</ns0:ClosedTerminal>

<ns0:ClosedTimestamp>?</ns0:ClosedTimestamp>
</ns0:Diversion>
</soapenv:Body>
</soapenv:Envelope>
Questions*
1) I cannot figure out how the SOAPUI tool or SOA substitutes "real" as the namespace prefix for the WSDL based HospitalDiversionMessage and what I need to do at my end to match the message structure as per what the third party needs.
2) I need ns0 namespace prefix to whole of Diversion xml element. Currently it is "real" at top Diversion element and "ns" for its children
Please suggest, I can attach the other imported XSD if need be.
Thanks
Edited by: user5108636 on Jun 13, 2011 6:55 PM
Edited by: user5108636 on Jun 13, 2011 6:57 PM
Edited by: user5108636 on Jun 13, 2011 7:02 PM

Questions
1) I cannot figure out how the SOAPUI tool or SOA substitutes "real" as the namespace prefix for the WSDL based HospitalDiversionMessage and what I need to do at my end to match the message structure as per what the third party needs.The xml namespace suffixes like real and ns0 are just references used by the XML Parsers. For that matter the "real" can be xyz as well.
You dont need to make any changes as long as the xml namespace suffixes refer to the same namespace.
If you see the first soapUI xml and the third party xml have the same namespace references and hence it is not a problem:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:real="*http://amb.com/cad/RealTimeService*" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*real*:Diversion>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="*http://amb.com/cad/RealTimeService*" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*ns0*:Diversion>
2) I need ns0 namespace prefix to whole of Diversion xml element. Currently it is "real" at top Diversion element and "ns" for its childrenBased on this, logically both the xmls represent the same xml message. And hence you dont need to make any changes.
Please refer to the basics of xml namespaces using the following links:
http://en.wikipedia.org/wiki/XML_namespace
http://zvon.org/comp/r/tut-Namespace.html#Pages~Introduction
Let us know if you still need clarification.
Hope this helps.
Thanks,
Patrick

IPhone issues with pics over iMessage

Our iphones are telling us that our pics we are tring to send are not delivered. But the other person can see it. Also I was using my iPad and it was having the same problem. Then when I checked my iPhone, the pics didn't sink with the message i had delivered. All the texts were there, but no photo. Also it's taking a really long time to sync with iCloud on our computer.

backup the device with itunes.
Restore the device with itunes and set up as new.
Sign into the facetime and imessage to activate it.
After that is done and activation is good.
Restore from the backup.
Then make sure to sign into facetime and imessage again and you should be good to go

IPhone 6 issue with pictures in my messages.

Similar Messages

Maybe you are looking for