Iphone 6 not going to landscape mode while in messages

For some reason when i try to type in landscape mode phone will not go to landscape more I have to close the app multiple times just for it to happen. Also bluetooth not working with any devices. And for some other reason while on FaceTime other people are saying my picture on there end was upside down.. HELP!!!!!!!!!!!! Also when i double click the home button and try to go back into iMessage the keyboard is no where to be found for a couple of seconds..

Indeed the option to lock to portrait mode is not on in the control panel. The behavior of switching from portrait to landscape works fine in my hand, it's when the phone is in a holder that it does not detect the orientation and adjust accordingly. The iPhone 5 did this with no problem, but on iPhone 6 any app that allows landscape mode starts out in portrait mode and then does not automatically adjust. Rather you have to move the phone back into portrait mode and it's that motion of being re-oriented into landscape mode that finally triggers the switch.

Similar Messages

  • My iphone automatically goes to landscape mode.. i can't view the songs in the ipod app coz of this. How can I fix this?

    my iphone automatically goes to landscape mode.. i can't view the songs in the ipod app coz of this. How can I fix this?

    I am having the same problem with a new phone. Is yours new? I was planning to take this one back to the store where I purchased it. I updated itunes and phone software, didn't help, so I'm thinking it's a hardware problem.

  • IPhone keeps going into recovery mode while playing mp3's through Ford SYNC

    Hi There,
    I have a 2008 Ford Focus with the SYNC iPod connectivity. I have the latest SYNC software update installed in my car.
    Twice now while playing songs via the USB connection with SYNC, my phone has suddenly dropped into recovery mode when it finishes playing a playlist.
    Can anyone offer a solution ? It is really annoying having to restore my phone all the time

    Ooops sorry about that. It must've been 8.1.2 then? I honestly don't remember.. I wasn't paying attention when I updated since I regularly do it for my iPad, other phones. Anyway, whatever is the latest version of the iOS, it got me stuck in recovery mode.
    really sorry about the 8.2 Info

  • In my iPhone the images and videos are not changing into landscape mode

    In my iPhone the images and the videos are not changing into landscape mode. And it is switching off  automatically

    Hi vijenderreddy,
    Thanks for using Apple Support Communities.  This article has some steps to try if your iPhone is unexpectedly powering off:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For the issue of images not changing orientation, see this article:
    iOS: Screen does not rotate
    http://support.apple.com/kb/ts3805
    Cheers,
    - Ari

  • My iPhone will not work in landscape mode anymore, how do i get to work again

    my iPhone will not work in landscape mode anymore, how do i get to work again??

    Double click round home button then slide icon on the bottom of screen to so you go all the way to left.  There you will see a square icon with a circle arrow .  That is the screen rotation control button.  Tap on that to lock/unlock screen rotatio

  • After iOS7 update my iPhone 5 will not go to landscape mode in Safari

    After recently updating to iOS7 on my iPhone 5, the screen will not go into landscape mode in Safari? How do I fix this?

    Hello lstroup,
    The following article provides information that can help get your screen rotating normally again.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • TS1538 i hanve an i phone 2g and it is stuced in recovery mode it is not going in dfu mode it is purchased from usa what shoud i do??

    i hanve an i phone 2g and it is stuced in recovery mode it is not going in dfu mode it is purchased from usa what shoud i do??

    If it's an original iPhone, you may as well dispose of it responsibly and buy a new phone. Apple stopped servicing them a while ago.

  • HT1414 Display does not go into landscape mode

    Help My iphone 5 display does not go into landscape mode and the rotation lock is not on . I done reinstalling the lates versionof iOS and restore my back up and restart my phone it dosen't work. My phone was work few days ago after updating some apps it doesn't work in landscape mode for photo, music, vidoes,Safari, calculator and Calander. 

    Restore it to factory default and do not restore from your backup; test it out again...if issue presists their may be a hardware failure with the device that is preventing this7

  • When i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

    when i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

    You got a new iPhone 4, and out of the box the phone is in recovery mode? If that's the case, return it.
    If you don't want to do that. what error code are you getting?

  • Form not going in Query mode

    hello freinds, Happy Christmas ..!
    i have a Master_Detail form, FORM2
    "LN_HEAD" table, that has 3 primary key;
    ln_code
    ln_no
    ln_emp_code
    "LN_DET" table has foreign key; Relation is set at form design time.
    lnd_ln_code
    lnd_ln_no
    lnd_ln_emp_code
    Form2 is called from Form1 on press of a button "bt1"
    When-BT1_press, i am only initializing :GLOBAL.LN_CODE = 'LCD'
    in FORM2 PRE-FORM
    I am initializing LN_CODE := :GLOBAL.LN_CODE and setting initial value property of the field LN_CODE to :GLOBAL.LN_CODE
    when the form displayed for the first time,,and i press F7 or Query button,form is going in field LN_EMP_CODE and
    asking me to enter LN_EMP_CODE, as it is required field.
    i also tried settng LN_EMP_CODE required property to false at design time and at WNFI, but then its firing WVI of LN_EMP_CODE
    and raises form-failure message "emp does not exists'.
    at form and ln_head block level i gave trigeer KEY-ENTQRY
    CLEAR_RECORD;
    CLEAR_BLOCK(NO_VALIDATE);
    ENTER_QUERY;
    but still not going in query mode. whats the matter? Has any1 face this issue before?
    please advice me.
    *on my form; 1st field is LN_DATE, 2nd LN_APPLY_DATE, 3rd LN_NO (auto-generated, enabled property set false at WNFI) and*
    *4rth is LN_EMP_CODE*

    I am initializing LN_CODE := :GLOBAL.LN_CODEWhat is LN_CODE in this initialization? Is it an item in one of the blocks of your form?

  • IPhone wont switch to landscape mode

    My iPhone wont switch to landscape mode when I rotate the phone.
    Any suggestions?
    Thanks in advance.

    You likely have the rotation lock on.
    This is covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • My Iphone 3GS went into recovery mode while I was trying to update to the iOS 6.1.2

    My Iphone 3GS went into recovery mode while I was trying to update to the iOS 6.1.2
    I need help fast. I'm on call and this is my only phone.

    It finally restored. I saw that a couple folks said they kept trying and finally got restored. So I decided to keep trying and retrying while I researched the techno routes folks described--DFU, tinyumbrella, and scary programming processes. I decided I'd rather put my sim chip in one of our old iphones and take mine to a shop than suffer through a bunch of complication. I switched to Apple b/c I got tired of playing programmer. I digress. After a few minutes itunes would drop my phone from dashboard yet continued showing the checking with Apple...status. So I repeatedly force-quit itunes, restarted phone, unplugged and plugged back into computer. Each time I'd do whatever itunes prompted then walk away. After about an hour of this, for no apparent reason, it went directly into recovery. Didn't lose any photos but did have to reinstall most of my apps. It has to be an Apple network issue related to this particular upgrade.

  • PXI-8431 not going into receive mode with VB6

    I am using a PXI-1045 chassis with a PXI-8431 RS422/485 card and communicating via a VB6 program
    The output of the PXI-8431 RS485 module works OK when it is in send mode, the signal levels are approx 1v and 3v for high and low, but when it is in receive mode the outputs remain at 1v and 3v instead of going into passive mode and both lines floating at approx 2v with approx 300mV differential as they should. This means when the remote devices send, the amplitude of the signal is approx half as they are competing with the PXI module, and that the centre point of the two signals are at 1v and 3v respectively. Our software does not receive the signals from the PXI module which is consistent with my theory that it is still in send mode and taking control of the lines, or maybe it has changed it to 4 wire mode.
    I have swapped over the PXI card and the remote cards with our good system and the problem does not move.
    I have eliminated ALL the hardware on the new ring by replacing it with a 67 Ohm resistor on the pins of a 9 way D connector plugged onto the PXI card directly. With a scope I can see that the new system is not going into passive mode, but with the same connector the old system works OK.
    The only difference I can see between the 6 old rigs we have that do work and the 2 new ones that do not work is the new ones use the the NI-XNET-PXI-8513 and the old ones use the PXI_8464 CAN card. Could this software be conflicting? Is there any other updates to the NI software that could be causing it?
    Solved!
    Go to Solution.

    Hi,
    I've had a check to see if we have any known software conflict issues with those cards but it all seems fine, it could be that the Windows Driver layer is causing some issues. If you nip into Device Manager and go to the properties of the 8431 you should be able to change it to 2-wire mode from those settings then re-run the program.
    Also does the program throw any errors at all in terms of device resources when trying to move from send to receive mode?
    What versions of NI-VISA and NI-Serial do you currently have installed?
    Kind Regards,
    Applications Engineer

  • Iphone 3g goes into DFU mode by it's self

    hi guys
    my iphone 3g goes into DFU mode by it's self is there someone who knows what should i do for it?
    by the way i made a restore and updates and everything possible i thought maybe there was an application pushing it to go in dfu mode so i left only the necessary apps but still the same it goes off when someone calls me they hear the ringing like if it's on i connect it to the pc and it's detected as dfu mode!!

    from a back up of course otherwise i'll loose all my informations as contacts, mails,...etc
    to be more clear last thing i did is:
    it was running on os 4.0 so i did update it to 4.2 then restored it from the back up

  • I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    Hi McGannahanSkjellyfetti,
    If you are experiencing difficulties with touchscreen response on your iPhone I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for