Iphone 6 plus facetime camera not working after 8.1 upgrade

iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

It seems the facetime camera does not work for whatsapp only it works normally.

Similar Messages

  • FaceTime Camera Not Working After Yosemite Upgrade

    So After I upgraded to Yosemite yesterday, my FaceTime Camera stopped working.
    Every time I turned on FaceTime or Photo Booth, the green light on the camera started to blink like crazy but nothing would show up on the screen. It was just black. And I tried different user too, not working.
    I tried to reinstall Yosemite, no luck.
    Tried to rest SMC and PRAM, no luck.
    Tried safe boot, no camera in safe mode.
    Tried repair disk permission, no luck.
    Here is how it showed in system report, I thought it would be more details?
    I am using MBP with Retina late 2013 model. I am 90% positive that the camera was working before this upgrade.
    I don't know whether anyone else encounter the same problem and I am afraid it's something I installed that's causing the problem. In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back.
    Thanks!
    <Image Edited By Host>

    geoffreysong wrote: ... I am afraid it's something I installed that's causing the problem...
    You have done the right things.  With all you have tried, some third party item you have added is a very good guess as to what could be causing your trouble.  The biggest difficulty will be determining which installation caused the trouble.
    I am certainly not experiencing your problem on any of my 10.10 Macs.
    geoffreysong wrote: ... In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back...
    Right again!  The way to prevent reinstalling the problem (and to prove your guess was correct) is to reinstall OS X using the OS X Yosemite: Erase and reinstall OS X instructions.
    Next, before adding anything else, test your camera using the applicable suggestions from Apple's How to Troubleshoot iSight article.  (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
      • If the camera works now, your suspicion is correct.  You can then add ONE needed app FROM ITS ORIGINAL SOURCE (not from any of your backups) and test the camera again.  If the camera fails, you have found the problem app.  If the camera works, continue adding apps one at a time, testing thoroughly between each addition.  After all your apps are added back, if your camera continues to work correctly, you can copy your data files back from your latest backup.
      • If the camera doesn't work immediately when nothing has been added to your fresh Mac OS X installation, you most likely have a hardware problem.  There are no user serviceable parts of the camera.  Contact Apple or an Apple-Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Macbook facetime camera not working after adobe flash update

    Macbook OS X 10.8.4. After finishing the Adobe Flash Player update the laptop builtin camera stopped working!!
    Please help.

    Try Uninstall Adobe flash player with the uninstaller
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    Do a Pram reset
    http://support.apple.com/kb/ht1379
    and SMC Reset
    http://support.apple.com/kb/ht3964
    Then reinstall Adobe Flash
    http://get.adobe.com/flashplayer/otherversions/

  • R830 Camera not working after Windows 10 upgrade

    I have recently upgraded to Windows 10 in my Toshiba R830 model laptop. after upgrading my Toshiba Web camera - HD is not working and i am unable to update with new driver. Please advise a solutions. Thanks and Regards Rakesh

    Can you check the part number that begins with a 'P' from the label on the bottom?

  • Camera not working after OS X upgrade

    Hello,
    My canera stopped working on skype after I upgraded mu OS X Lion to Yosemite 10.10.2
    Is it normal?
    Thx
    ziad

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • IPhone 4s back camera not working even after buying new iphone 4s

    Back when the ios 6 updates were coming out  in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone  and  finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

    A new phone has a warranty.  So take it to an Apple store.  If they can't fix it, they will replace the phone.  Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

  • Camera (Skype, FaceTime, iChat) not working after installing Maverick OS

    camera (Skype, FaceTime, iChat) not working after installing Maverick OS

    kwmaclean wrote:... same problem...
    If How to Troubleshoot iSight doesn't help, Reinstall OS X.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • Web camera not working after sowtware update

    HI, there
    My macbook's  (core duo)camera not working after installing show leopard, can you advice if I need some other updates or anything to make it work?

        Hi purduejatt,  I apologize for the delayed response as I understand how important it is to have a working camera!  I would suggest clearing the data in the Camera application.  Press Menu>Settings>Application Manager>All>Camera>Clear data.  Please keep me updated on the status as I would be more than happy to provide additional support.
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • My sound on FaceTime is not working after downloading iOS 6 ??

    Ever since I have downloaded iOS 6 when I am on a FaceTime call nobody can ever hear me. Has anyone else had sound problems since the new update ??

    Re: My sound on FaceTime is not working after downloading iOS 6 ?? 
    Apr 8, 2013 12:16 AM (in response to B69B69)
    same issue here... And a restore didn't do any good either.
    Try backing up your information to iTunes, and Restore your devices as new with no content on it what-so-ever. If the issue persists after that, this may be a hardware issue. Check your Mic's for debris, and remove the case you have on the device as well to see if you have the same results. Then contact Apple Support if all else fails.

  • Most of my apps do not work after 3.1 upgrade

    Most of my apps do not work after 3.1 upgrade. I have done a softboot 2 times and they still willnot connect.

    Are you running the current version of the 3rd party apps on your iPhone - have you checked for app updates with iTunes on your computer?

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • Iphone 6 plus front camera not working in whatsapp

    iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

    It seems the facetime camera does not work for whatsapp only it works normally.

Maybe you are looking for

  • How can I create a mobile application to connect with my php system

    II have few question to ask all expert here : 1. Im using Netbeans IDE, how can I compile the .java file to .jar ? 2. Currently, I have created a point of sales application using php and I hope to create a Mobile application to connect with tis syste

  • Creation of sales order without reference

    Hi all, How can i restrict that sales order should be created only with reference to contract and not alone? Please update. Best Regards, AI.

  • Writing External Query

    Hi Experts, I have a scenario where I have to extract data from MS-Access. I'm developing a Web Dynpro ABAP component. I looking for help in writing query for data extraction. I have no idea of extracting data form MS-Access. Have worked on BAPI and

  • Duplex printing on officejet could only be set to short-edge binding

    My 6700 officejet could only print on two-side with short edge binding even when the dault preset is set to long-edge binding. I have tried everything. Something is overriding the duplex setting and I can't figure out what. Please help.

  • Reg : Smartform translation

    Hi, In our smartform we are trying to print this French text  “mise en œuvre” , but Adobe is having problem in reading this special character "œ ", so it prints as # . Please suggest some solution to overcome this . Thanks & Regards, Keerthi vasan.M