IPhone 6 recently stopped ringing and making text alert sounds since most recent upgrade to ios 8.1.1, has anyone experienced this, and if so, how did you correct?
AFter recent upgrade to ios 8.1.1, my iphone 6 no longer makes text alert sounds and ring does not sound for incoming calls (except on car bluetooth). has anyone experienced this, and if so, how did you correct?
I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.
Similar Messages
-
My IPad has one half of the screen with vertical multi colored stripes and the other half is normal. Has anyone had this problem and if so is there a solution?
You could have a hardware issue, but try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
IPhone 4 stops ringing...no alerts sounds!
My IPhone is 5 months old. Frequently it stops rinigng or giving tones for phones calls, messages or alerts. The only solution is reboot the phone. Is anyone else encountering this problem?
i have iphone 4 running ios 5.0.1 and the following happened to me twice:
I hear my phone ringing I get it out of the case to answer and the display is black for a couple of seconds then the caller name appears with the option to "answer" or "reject" to my surprise since the phone had not been used for over an hour and should have locked automatically! Could this be the case, since it covers the phone from front and back! Can it prevent the screen from locking automatically cuz it touches it? However, when it was ringing it was completely black before the display came back on, while if the phone is not locked, the screen is generally dimmed not black. This happened twice with a one month of intervals between them. Also, once it happened that the phone was ringing, the screen is black, but there was no display till I pressed the home button. This time, the phone was licked and displayed "slide to answer"
Please help and tell me if this happened to anyone. -
I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this, and any idea how I can rectify the problem?
When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
http://support.apple.com/kb/TS1567 -
I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later. Has anyone experienced this problem? Any suggestions as to how to correct it?
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Also, go to Settings>General>Usage>Manage Storage and see what is using the storage -
Whenever I try and sync my iphone 5 to my itunes on my laptop it comes up with' an unknown error occured (0xE8000084)' has anyone had this and how did you fix it?
What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
THERE IS NO SIM CARD INSTALLED IN THE iPHONE YOU ARE ATTEMPTING TO ACTIVATE - and there is? Has anyone suffered this and what to do? Thanks
Possible causes:
1) Improper SIM card placement.
2) Faulty SIM card.
3) "No service" area of the cellular network.
4) Unsupported carrier.
5) Network locked iPhone. Trying to a activate a locked iPhone on a different cellular network. (Other than to which it is originally locked to).
6) The computer doesn't have an internet access on which you are trying to activate your iPhone using iTunes.
7) Apple server busy (rare). -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time
In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD -
I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?
Do you have your Opacity Control set to a very low value?
-
Adobe CS6 Bridge no longer will preview .tif files. Has anyone seen this and know how to correct?
No problems here viewing TIFF files in Bridge. Try restoring the Bridge preferences. IMMEDIATELY after launching Bridge hold down Ctrl+Alt+Shift (Windows) or Cmd+Option+Shift (Mac). You'll get an option to restore preferences.
-
Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?
8.2 is out...perhaps that will address your problem.
Barry -
Microsoft Office 2011 - Has anyone downloaded this and is it useful? More importantly I cannot find it in the App Store.
Hello,
There are some Microsoft product like Windows Phone 7 Connector on the Mac App Store but for the moment Office is not there.
In an interview last year Microsoft’s Amanda Lefebvre told Mobilized : “It’s something we are looking at”.
http://allthingsd.com/20110127/microsoft-considering-whether-to-bring-office-to- apples-mac-app-store/
If you have applications like iWork or the free OpenOffice (http://www.openoffice.org/) you will be able to read files created by Microsoft Office. -
I updated my fully functional IPhone 4S to OS7. Now when someone calls it rings once and goes to voicemail. Has anyone had this problem? How do I fix it? And yes I have restored my phone and reloaded it twice, still *****. It has turned into a Microsoft product.
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Maybe you are looking for
-
Google Calendar vs Ical with iCloud
Which is the best do you refer ? I'm using iphone, macbook and a PC desktop. I need to keep everything in sync and work smoothly. Thank you.
-
Adobe Premiere Elements 11 Effects Problem - HELP
I use Adobe Premiere Elements 11, and when I use effects the footage ends up speeding up, repeating itself, and just not staying the same as it originally was. Does this have to do with what type of footage it is. I am using screen-captures that I go
-
Help me to solve
-
Working with large database with multiple large tables ( orcale 11)
Hi all, I'm trying to read and parse 3 tables: NetworkEvent - 500000 entries NewTrapEvent - 500000 entries NewTrapVlaue - 2000000 entries I I used 1 JDBC connection, 2 statements and 3 ResultSet( i used same statement for two queries). My questions a
-
Access Denied error when copying Lead conversion layout
Hi.. I wanted to mark as default the following: -Create new account. -Create new contact -Create new opportunity when converting a lead. For this porpuse I tried to copy the "Standard Lead Conversion Layout" and take out the other options. In the fir