IPhone 6 reset itself after visiting web page

When browsing the Internet, an annoying pop up came up which I clicked on by accident. It was of adult nature and after about 3 seconds of that page loading, my phone turned itself off.
Should I be concerned about this?
Phone seems to be fine, I just hate the thought of some dodgy hacker retrieving my information from these annoying websites.
Thanks

Any chance you installed a Solaris patch that required a reboot but failed to restart the machine? Some Solaris patches update both the kernel and libraries, and failing to reboot after installing such patches can result in mysterious failures.
Apart from that, I don't know what could be going wrong. If you want to try debugging the problem on your own, you could inspect the core file. Otherwise, you should probably call tech support.

Similar Messages

  • Issue After configuring some of the preferences in Firefox, it began to reload all images in previously visited web pages, which resulted in a significant slow

    I spend some time with The preferences in Firefox where I have been configuring, after some tweeaks it began to reload all images in previously visited web pages, one of the sites where my own: http://netsalg.biz so I know that thats not the issue, but it all resulted in a significant slowdown of the browser - What will be my next step - a new install? or can it be fixed

    try a reset of firefox to reset all preferences: [[Reset Firefox – easily fix most problems]]

  • My iPhone reset itself and is now asking me to reconfigure it. I connected it to my computer to do it on iTunes, but it says that it can't...

    My iPhone reset itself and is now asking me to reconfigure it. I connected it to my computer to do it on iTunes, but it says that it can't... It went back to the configure screen as it was when I first got it but I've had this phone for about half a year. It was fully functional until about yesterday. Someone help.

    Hello Helpstar,
    Thank you for using Apple Support Communities!
    Depending on the message you got in iTunes I would recommend the troubleshooting in this article named:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Regards,
    Sterling

  • Firefox closes after printing web pages.

    Firefox 12.0 is my browser. Up-to-date. After printing a web page, Firefox closes. Doesn't happy with other printing i.e. Word docs. Virus/malware protection enabled and up-to-date. I don't see any setting that would be asking Firefox to close when finished, so what could be causing this?

    Wow, that's incredibly inconvenient.
    To be clear: Firefox is shutting down completely without displaying any error message? When you restart Firefox, does it work or do you get the error that Firefox is already running? Does Firefox suggest resuming your previous session or resume it automatically (i.e., Firefox recognizes that it crashed)?
    Usually the first thing to try when printing misbehaves is to reset the various settings Firefox saves for your printer. You can do that in the about:config preferences editor with a lot of right-clicking.
    A little more info here: http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer
    Does that make any difference?

  • IPhone 3G doesn't render web page properly; newer models do. CSS problem?

    Hello,
    I have programmed a web page that's almost finished, and now the owner tells me it doesn't work on his iPhone 3G.
    The problematic phone identifies itself as:
    +Agent: Mozilla/5.0 (iPhone; U; CPU iPhone OS 312 like Mac OS X; en-us) AppleWebKit/528.18 (KHTML, like Gecko) Version/4.0 Mobile/7D11 Safari/528.16+
    My site uses the YAML Framework http://www.yaml.de/en/home.html
    I went to the shop to test it on various iPhone models and it seems that in fact the 3G doesn't use my stylesheet, and instead reverts to the basic fall-back stylesheet. (To be precise, it seems to ignore the basemod.css and use the base.css instead)
    I have made some test pages which can be seen here: http://ou812.bplaced.net/dev20/
    The HTML and CSS validates OK. The site looks fine on newer iPhone models, and on Apple's SDK iPhone Simulator. (the version I have can only simulate OS 4; anybody know how I can simulate OS 3?)
    Has anybody got an idea what could cause this?
    If someone has an iPhone 3G, could you have a look at that test page? I cannot post the original site here but could of course email it to you..

    In fact, it doesn't load any stylesheets. The site looks as if there aren't any there. Strange.

  • IPhone Reset Itself

    I took a nap today and when I woke up, my iPhone 4 had reset itself. I could not use my phone at all without synching it with my iTunes and the phone had me go through to create the settings as if I just purchased it. I just connected it to my computer, so it is now back to the settings from when I last synched it to my iTunes, but I am concerned that it may have been hacked into. Has this happened to anyone else?

    You need to restore your iPhone via the summery page in iTunes then iTunes will ask you to restore from backup do that as well, but what ever you do don't back up now or the corrupt file might tag along.

  • Upgraded IPad last week, now Safari is not listing my visited web pages below the web address.  Whenever I click on the book icon a bookmark box comes up instead of the usual 9 web page icons it used to show.  How do I correct?

    How do I reconfigure my Safari web pages to show the 9 icons of pages I visited?  Since I upgraded last week, all I get now is a popup bookmark.  I've tried everything except the correct way to solve this problem.  I would like to see the web pages I've visited when I turn Safari on....any suggestions.

    You can't - Safari on iOS 5 used tabbed browsing as opposed to the thumbnail/page browsing as on previous iOS versions.  You now open new tabs/pages via the '+' to the right of the tab bar, and you can close the selected by tapping the 'x' on its left-hand end (unless it's the last tab).

  • Help! iPhone reset itself

    My iPhone was running low on battery about 14% so I plug it in and it shuts off, and resets itself. Why would my phone do this and what should I do about it? I lost all my information on my phone.

    Slymm71 wrote:
    just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
    See your other post... 
    https://discussions.apple.com/message/18876037#18876037

  • Nano resetting itself after a minute or so into the workout.

    For some reason my iPod started resetting itself right after I start my workouts. I keep restarting the workout. It tracks the info for about a minute and half then completely shuts off, shows the big black screen apple, then restarts. The battery was fully charged so that's not the issue. It did this 6 or 7 times. Now today, it doesn't reset but the Last Workout, Recent Workouts and Personal Best are now blank. Is the receiver piece that's plugged into my iPod dying? The iPod seems to be ok. I'd hate to have future runs not recorded because this issues surfaces again. Anyone else had this issue?

    Most likely, it's a corrupted xml file. This has happened to me several times over the past couple of years. If you have Tinkertool (or another utility that shows invisible files), you can access your iPod's Trainer folder (which holds the workout xml files, delete them, and it should fix the problem.
    Hope this helps!

  • Apple tv (2nd gen) reset itself after playing one song

    Invited friends over and the apple tv failed me.
    When connected to my home shared iTunes library, the apple tv will play the first song and at the end the apple tv will go to reset itself or get disconnected from the network.
    Then I tried to play the music using the iTunes form the iMac but using AirPlay via the apple tv. The same problem, the apple tv will no play after the first song, and reset itself. However the iTunes in the iMac continued playing the next song.
    I was lucky the I had a airport express. So I moved it to replace the apple tv and connect Otto the speakers. I Mac played non stop via the airport express with no issues.
    Any ideas what to do?

    Have you unplugged AppleTV from the mains and restarted/re-tried.
    I doubt the software is bug free and sometimes unplugging power gets rid of spurious glitches.
    If the problem persists, there are a couple of possibilities apart from AppleTV including issues with your iTunes library/artwork or individual songs being corrupted that iTunes  itself may handle better and more gracefully than the iOS device.
    Consider creating a new itunes library (hold alt when opening iTunes to create new/switch) and test with that (even under a different user account).
    If it repeatedly does it send feedback to Apple here:
    http://www.apple.com/feedback/appletv.html
    Do movies/TV shows play ok? If they do it's unlikely it's a network issue of some kind.
    Also check that the iMac isn't going to sleep after a few mins causing AppleTV to hang as it can't find the song.
    AC

  • System Resets itself after about 1 to 2 hours use

    Hi guys,
    I had setup my system for about 2 months now.  Bios is version 1.90.
    I encountered my system resetting itself without warning, sometimes after 1 to 2 hours use, sometimes, even 30 minutes use.  I am using Intel CPU stock fan and getting startup CPU temperature of 44 deg C and about 50 deg C after a few hours use.  Sometimes, the system is stopped and shows the blue screen warning.  A warm reset brings my system back up again.
    Suspect:
    1.  Since I have many peripherals, I am worried about my PSU whether it is able to take it.  The power calculator at http://www.adecy.com/psu/ recommended 570W.  No way to get that man!  I am willing to consider a new PSU of maximum 480W (within my budget) but if it means that I can continue to use the current PSU but with risk of shortened lifespan, I'm ok to stick to this.
    2.  Maybe the Y-Connectors cables might becomes loose sometimes.  Thinking of changing the cables to better tight fitting ones (difficult to find though).
    3.  Overclocking - Don't think so because if I didnot remember wrongly, even at 2.8GHz without o/c, the sudden resets did happen before.
    Hope someone can give me a suggestion.  Thanks in advance.
    System Configuration:1.  Mobo 875P Neo-Fis2R
    2.  Intel PIV 2.8c --> 3.03GHz (FSB = 217)
    3.  DOT: Capturn
    4.  PAT: Fast
    5.  Kingston 2.5CL ram, 2 sticks of 512MB
    6.  2MB Cache 120GB hdd to ICH5R as raid 0 using HighPoint's RocketHead convertors
    7.  Seagate SATA 80GB Hdd to Promise 378 raid 1
    8.  WDC 800JB 80GB Hdd to Promise 378 raid 0
    9.  Intel OEM modem
    10.  Canopus Storm 2 PCI card
    11.  Enermax Power Supply 350W,
    +5 V = 32A
    +12 V = 17A
    +3.3V = 32A
    -5 V = 1A
    -12 V = 1A
    -3.3V = 2.2A

    When you use the calculator, you have to decide how much you want to load your system up. Eg you have 8 USB ports, how many to you actually use?
    This is what I calculated (guessed at the fans):
    Recommended PSU: 401W (151W on +3.3v & +5v rails) for:
    -1 x Motherboard without onboard devices
    -4 x Fans (including PSU fans)
    -8 x Memory (128MB DDR)
    -1 x Graphic Card
    -1 x with powerful 3D Accelerator
    -3 x HDD
    -1 x Keyboard
    -1 x Mouse
    -CPU: Intel P4 (2.8D GHz 0.13 µm µPGA478 @ 1.525 V with HTT)
    The 350W PSU does look on the light side. I don't have a good feel for the Canopus Storm 2 PCI card. Looked it up and it looks like it probably draws as much power as a top end video card. Also, the CPU power requirement goes up with overclocking.

  • Acrobat File Not Found After Printing Web Page

    Here is my problem:
    I am trying to print a web page from our intranet but once the process is complete, a log file opens saying:
    "The system cannot find the file" and then it lists the file I just tried to create.
    The page is basic HTML with a small amount of Javascript.  Disabling the Javascript had the same problem.
    The page is about 30 pages long.  Only printing the first page had the same problem.
    Printing to PDF on an external site had the same problem.
    I tried the same process in Office and ran into the same problem.
    Here is what I am doing:
    I am opening the web page in the browser.  I go to File > Print.  I select "Adobe PDF" as my printer.  I do not make any edits to the settings.
    Here is my environment:
    Adobe Acrobat 9 Standard
    Windows XP SP3.
    Tried it both in Firefox 3.6 & IE 7.
    "Acrotray.exe" is running in the background.
    Acrobat is completely updated.
    Is it a setting issue?  Possibly a software conflict issue?
    Thanks,
    -B

    Thanks for the reply!
    Here are answers to your questions:
    No, I cannot print to PDF from other applications.
    I do have have the checkboxes to request filename and open in Acrobat selected.
    I do not get an error from Distiller during the process of creating a PDF.  It isn't until it is completely done that the log file pops up that simply says, "The system cannot find the file" and lists the file location (i.e. c:\users and settings\desktop...).
    Beyond that log file, it looks like everything is running fine.
    Let me know if any other information that will help.

  • Have already backed everything up onto my new iPhone from my old one, but when it goes to reset itself after backing up, it just goes back to the "hello" screen (the same screen from when i first turned on the phone) why in the world is this happening

    PLEASE HELP ME

    Hi kaybrookeexo,
    If you are having issues transfering your data from a prior iPhone to your new iPhone, you may find the following article helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/ht2109
    Regards,
    - Brenden

  • IPhone resets itself when not in use

    I have an original iPhone which has been updated to 3.0. Since the update I've noticed that the phone will spontaneously restart itself when not in use. When this happens I'll notice the screen light up with the silver Apple logo and then go blank. This will happen repeatedly. While this is going on I can't use the phone until I plug it into the computer. Once iTunes does it's thing the phone will return to normal for a while - sometimes a day or two - before repeating this behavior. I have reset and restored the phone but without solving the problem. Apart from this everything seems to be working properly.
    Any ideas?

    Have you tried restoring and setting up as a new phone (i.e., not restoring from a backup)? Sometimes those backups bring along whatever is messing up your phone.

  • MacbookPro Resets itself after Restart

    So I just got a brand new MBP C2D 2.16 15" 2 days ago. After adding all my favorite internet sites, my personal folder with pictures,music, etc. I restart my computer because Ichat is lagging badly and find out that my personal folder has been completely wiped off, the favorities on safari that I deleted are now back on.....
    I rebooted MacOS X onto the drive again completely erasing everything and starting fresh. When I get back to the same place before with all my favorites added, my personal folder uploaded I tried installing parallels and I had to restart my computer and find out that again my folder is gone and favorites reset, along with some of the view options I set are also replaced to default settings, ichat was also reset to default...
    Any help, before the 2nd time I did repair disk permissions and everything checked out ok and I had the new update both times installed

    You didn't happen to rename your Home folder by any chance did you?
    If you are the only user of the computer open your Users folder. You should see two folders in there. The User account folder and the Shared Folder. If you see a third folder with two of them looking like they could be your user account folder then one is probably an empty account folder and the other will have your stuff in it.
    If your User folder was originally called ChrisB32 for example and you decided you didn't like that and changed it to Chris...well that's a big no no even though OS X will let you do it.
    What happens is if you rename that ChrisB32 folder and then try to use a program that accesses the the User folder OS X will determine it is missing and create a new empty one called ChrisB32. Rebooting will cause OS X to boot using the newly created empty ChrisB32 folder and everything will revert to defaults. You settings will be in the Chris folder unseen by OS X.
    It is just a guess as to what may be going on. Let me know if you find more than 1 candidate for what could be your User folder.

Maybe you are looking for

  • Prepack vs Display in SAP retail

    Hi guys, I am still struggling to understand the difference between prepack and Display in SAP retail. Anyone has a good understanding of that? Cheers Julien

  • Will I be able to upgrade either of these Macs to Mountain Lion?

    Model Name:          Mac Pro Model Identifier:          MacPro1,1 Processor Name:          Dual-Core Intel Xeon Processor Speed:          3 GHz Number of Processors:          2 Total Number of Cores:          4 L2 Cache (per Processor):          4 MB

  • MST/RSTP not quite working

    Hi, I have 6 x 3560 switches all connected in a redundant ring topology and interconnected using fibre. I have enabled the fibre ports as trunk ports with dot1q encapsulation. I have created 6 VLANS and defined ports on each device as members of the

  • FileReader does not return the correct byte value of the characters

    I have some text in a very old persian code page and all I have from this code page is numerical table of the characters(like ASCII table). With a HashMap, the equivalent Unicode characters are mapped to the numerical values. With using FileInputStre

  • Final Cut 5.04 Won't Load

    Final Cut won't load in the TI. Stopped last night at class. It goes thru the load screen, then just shuts down. I've reloaded software, no effect. Any Ideas what to do next?