Iphone and windows xp 64

I've been pulling my hair out for 4 days now. Is there any possible way of setting up an iphone if you have windows xp professional x64? It seems as if I am caught between regular windows xp and vista, because there doesn't appear to be a version of itunes that recognizes both my operating system and my phone. I would be so grateful if someone could come to my rescue!!!!!
Thanks

I haven't tried yet, but you can check on:
http://answers.yahoo.com/question/index?qid=20080208120540AAg1p0R
It seems helpful.
Message was edited by: mejimenez

Similar Messages

  • Iphone and windows 8 compatibility?

    When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

    I have  no issues with Win 8 working fine with the latest (win 8 compatible )
    iTunes

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

  • Iphone and Windows Vista problem

    Okay, so I have windows vista and the iphone seems to be having a hard time with that.
    When I plug my Iphone into my computer it recognizes the apple device and asks if I want to import picture. In itunes it shows the button that the Iphone is plugged in and synced, however, when I press that button nothing happens. I can't add any photos to it because everytime I try there is some kind of error. What can I do?

    Same exact problem!
    Upon returning home after picking up the long awaited iPhone 2, I discovered that my iTunes and/or Windows Vista would not detect the iPhone, and I’ve been searching the Internet for a solution since (going on day two now). Apparently, Vista and the latest iTunes have had this problem quite a lot.
    It’s really a shame, as I think Apple is missing a singular opportunity to use the iPhone as a transition drug to more Apple products. I for one have been looking for a reason to dump my Dell and pick up a MacBook Pro, and the iPhone seemed to be it.
    However, if I get caught in the middle of a ******* match between Apple and Microsoft, well, they both lose.
    When you spend this kind of money, it is imperative that the thing works out-of-the-box. I will never purchase a Dell again for just this reason. Now, if I purchase a Lada, well, I'm expecting to put in some hours and blood to get the thing air born, but an Apple product? No way.
    Please help me become an Apple customer.

  • Sync outlook with Iphone and windows 7 64 bits

    Hello,
    I have a new computer (HP DV7 3080ef) with windows 7 64 bits, itunes 9.0.2.25 and one iphone 3Gs 3.1.2.
    I succeed to import from XP 32 bits my library on my new pc, including my outlook (2007) file.
    I can synchronize my computer with iphone, thanks to this forum for the help, but only my outlook data are not transferred from pc to iphone and iphone to pc...without any error message and during the sync process, on the header of itunes we can see the sync for calendar, contacts and notes...Other topics are syncronized without prob.
    I am totally lost and would like to continue to use my iphone as I did with my old XP computer.
    thanks for your help
    Herve

    ok I succeed. Maybe it can help somebody. solution is to recreate a new PST file, copy and paste all folders form old to new one (contacts, calendars, notes etc...). Then in outlook open Tools/options/data file, and select the new one as default file.
    sync now works, I can use my precious with my laptop.
    Hope this topic will help.
    Greetings seasons to all.

  • Iphone and Windows 7 64 bit

    I am using the RC of windows 7 64 bit and I have trouble connecting my iphone or ipod. I installed the 64 bit version of itunes and it works, but it doesnt install the mobile device services and drivers as it seems. my iphone gets detected as a camera, but i can't synch it with itunes. Is there any solution to this?

    Okay, I'm throwing in the towel for now. I unplugged every USB device, turned off my Bluetooth keyboard and mouse, unplugged the wireless router and unplugged the cable, turned off wifi on the iPhone, and using a USB mouse I started iTunes. By the way, it seem to take an awful long time just to start up besides not seeing the iPhones.
    Then I plugged in my iPhone and waited. Nothing at all. No error messages but no iPhone. I turned it off and on, left it hooked up while I restarted iTunes, did a hard reboot while it was plugged in. NO reaction whatsoever from iTunes.
    Then I happened to notice that Skype was doing something in the system tray so I (for the heck of it) disabled it and immediately got the old error message that an iPhone has been detected but can't be identified.
    This eco system is too fragile. Even if I got my iPhone identified once I could never be sure that I wouldn't breathe the wrong way and knock it out again. I'm going to live with my bizarro work-around of connecting to a spare XP tower (no keyboard, mouse or monitor) that can sit on my network at home and control the iTunes sync via GoToMyPC. This was the PC I was using before the Vista machine. I guess I'm using it as a iTunes 8.2 server.
    This has to be an issue that Apple addresses in the not too distant future, one would hope. I'm going to try and wait it out.

  • Iphone and Windows XP Pro

    Hi and new to the forum. After upgrading to os 4.2 on Iphone 4, when I sync to the computer it "finds new hardware Iphone" and "finds new Digital Camera" and then the add wizard pops up and nothing is working from there and it doesn't install. There was a fix on the Apple site which hasn't worked for me to follow through the add and upgrade usb driver for apple.

    You dont have a webcam on the computer... Well I'd still check Add/remove Programs for any Webcam software.
    Alternatively it could be security software Norton/Kaspersky/NOD32/ ect...
    Something you can try is using MSconfig on the computer
    to use Msconfig on windows you would
    Click Start>Run>  in the box type Msconfig - click run or ok..
    When the system configuration utility appears you choose selective Start up - Click the startup - click Disable all.
    After disabling All items it will uncheck every item in the list. You will want to go through the list and Re-check anythign apple or iTunes/Quicktime related.
    Once you have done that click the Services tab - Click Hide All microsoft services -then click disable all.
    After you have done that same thing here look for anything Apple, Quicktime, Bonjour, iTunes, iPod related and recheck them - once you have done so click ok - the computer will prompt for a reboot - Restart the computer and test.

  • Iphone and windows media player

    I just got the new iphone and would like to load songs from my pc which is windows xp pro. I have windows media player 11. The player does not recognize the device when hooked up. Hope there is an easy solution.

    Hi Dean and welcome to Discussions,
    to use you iPhone with a Windows PC you have to use iTunes for Windows http://www.apple.com/downloads/macosx/apple/windows/ and also get the iPhone Configuration Utility from there.
    The Windows Media Player is not supported with the iPhone (see requirements here http://www.apple.com/iphone/specs.html )
    Regards
    Stefan

  • Iphone and Windows 7

    I have no trouble with itunes. I had no trouble seeing and connecting both laptop and iphone with VISTA.
    In Windows 7 the laptop pairs with the iphone fine but will not connect with it.
    I have gone into network settings and it just will not connect. I have the exclamation mark in device manager but i had that in vista as well.
    Can anyone connect with Iphone in Windows 7 to use the laptop speakers etc.
    Thanks for any help.

    I have only noticed the iPhone being the primary speaker when I connected any BT tongle to my computer and not the other way around. You can attach a 2.5mm cord to the PC and iPhone and that will work, but to make the iPhone play into the Sony via BT I don't recall there being a way.
    You can purchase a BT Stereo Headphones deal and hook up a BT dongle to the PC and pair both the PC and iPhone and it will work that way. Only problem is only one device per headset can be used at once.

  • IPhone and windows system recovery

    hi i have an iphone and i did a system recovery recently (windows xp) and i was wondering if when i connect to itunes to sync it says delete all files. will it delete my photos, contacts and notes and music or just my music

    007bond,
    If you put at least one contact into Outlook or Address Book, you will get the option to merge the contacts with your computer. Notes are not synced with the computer at all, so those should remain unchanged.
    Hope this helps,
    Jennifer B.

  • Syncing Google Calenders in IPad Iphone and Windows PC

    I have a google mail account on my Ipad Iphone and my Windows PC. When I make an entry on the Google Calender on the PC it syncs successfully to my IPad & Iphone. If I make an entry to the Calender on either my Ipad or my Iphone this info does not get synced to my Google Calender on my PC. Why please

    Hey fleegreen,
    Thanks for using Apple Support Communities.
    Both of these will help you setup iCloud on iOS devices and on Windows.
    iCloud: Set up iCloud on your devices
    http://support.apple.com/kb/PH2609
    http://www.apple.com/icloud/setup/pc.html
    Have a nice day,
    Mario

  • Will Iphone and windows calendar ever sync.

    Will Iphone and the calenar in Windows Vista ever be able to synce? or will Iphone continue to make you use Outlook?

    rvrsmtns wrote:
    My real dissappointment is with Apple Support...they should be more upfront on an issue this big...just say it...the iPhone calendar will only sync with Outlook 2003 & 2007 but NOT with its Vista successor "windows calendar".
    They do say it. From the iPhone Get Ready page:
    +iPhone uses iTunes to sync with the calendar application you already use on your computer — iCal or Entourage on the Mac, or Outlook on a PC+
    http://www.apple.com/iphone/easysetup/getready.html
    No mention of Windows Calendar.
    Message was edited by: Ansuz82

  • VCS Expressway event log errors when Jabber for iPhone and Windows log in

    hi folks,
    I've deployed Collaboration Edge with VCS Control and Expressway:
    my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
    2015-03-27T18:00:28+02:00
    tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
    2015-03-27T17:58:55+02:00
    tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
    2015-03-27T17:58:32+02:00
    tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
    2015-03-27T17:58:08+02:00
    tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
    "Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
    tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
    and I can't find any information which describe such types of error.
    thanks!

    Thanks Srini, but the instructions have two options:
    1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
    This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
    2. Download the install package and run OracleXE.exe with the remove iss file.
    Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
    Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
    Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
    Am I unusual in not having a Control Panel entry?
    (and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
    Regards,
    Andrew

  • Iphone and Windows 7 problem

    I recently updated the operating system on my desktop from XP to Windows 7. I listened to someone who assured me that you did not have to backup my system before I did the install (my bad).
    I downloaded Itunes to my desktop again but it does not recognize my iphone. I don't want to loose all my musics and apps.
    Can anyone help me with a fix to this? Please.

    You should be maintaining a backup of all the important data on your computer's hard drive including your iTunes library regardless if installing a new Windows version and especially before doing so. Maintaing a backup is important regardless the platform but even more so with Windoze due to constant virus, adware, and spyware concerns.
    Check this link for an iPhone not being recognized with Windoze.
    http://support.apple.com/kb/TS1495
    After you get this resolved, your iPhone will be erased of all iTunes content with the first sync and the same for any photos transferred from your computer to your iPhone if this is selected under the Photos tab for your iPhone sync preferences.
    iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod or iPhone, but this is for iTunes content that was purchased/downloaded from the iTunes store only.
    First you need to re-authorize your computer with your iTunes account with iTunes. With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.

Maybe you are looking for

  • Problem setting up crontab for cyrusimap

    Greetings all. I've just finished setting up OS X Server 10.4.10 on an intel mac, and was trying to setup a crontab for cyrusimap to make sure that all mail for JUNKMAIL and NOTJUNKMAIL users is deleted automatically using ipurge. I created the follo

  • Overriding Soap Header using Axis(SOAP) Receiver

    Hi Experts, I am having a problem in including the SOAP Header in the XML using the SOAP Axis Receiver Adapter. Well I am not sure on how to place this structure in the header: <SoapHeader>     <Header1>         <child1>         <child2>     </Header

  • IDOC's Process in MM in a easy way

    Hi Experts, 1) What is the functionality of the IDOC's in real time.? 2) What is the role of  MM Consultant in processing the IDOC's. ? 3) What are all the frequently used IDOC's in SAP from MM point of view. Please don't send me the help.library doc

  • CS5.5 Crashes When importing Projects from CS5

    I'm trying to update ll my CS5 projects into CS5.5.  However it will load the project, but while indexing the files it goes super slow and eventually stops.  Then crashes.  This happens to all of my CS5 projects I try to import.  CS5.5 however works

  • DETECT THE OBJECT IN MONOCHROME IMAGE

    I want to detect an extra object present in my product but it has the same color as the background.  using thresholding and  particle analysis i got the detection but the resulting values are too small that sometimes this procedure leads me to  make