IPhone calendar + List View All Calendars option (MobileMe)

Hi all,
I'm trying to fix a problem, which maybe there for some time already, in the iPhone Calendar. I'm using MobileMe to sync contacts and appointments. All my devices are up-to-date to the latest levels of firmware and software.
I have a normal calendar in iCal and some subscribed calendars. Ther's no difference in both type of calendars.
This is what's happening.....
- Individual calendars are all looking perfect in List, Week and Month view.
- All Calendar option is looking good in Week and Month view.
- All Calendar option is bad in List view mode.
When selecting the last option the Today date is changed a couple of days (Today = Wednesday 10-3), but also appointments are on different days. For example the soccer games on Saturday (6-3) and Sunday (7-3) are now changed to Tuesday (9-3) and Wednesday (10-3).
I have the same calendar on my other iPhone and nothing weird going on over there?!?
Does somebody have a clue?
PS. The calendars for this (MobileMe) user are all correct on the other Apple devices.
Thanks!
Regards,
Arjon G. Stelinga

Hi All,
Got a message from cini007, but I get an error message when I want to reply to that message. I have copied the "solution" below.
I have tried this, but it's not working. The only thing happening is it has changed the dates randomly.
Although I have been looking for the auto shut-off option. I can't find that option only in the alarm clock options?
cini007 posted "Re: iPhone calendar + List View All Calendars option (MobileMe)" in "iPhone calendar + List View All Calendars option (MobileMe)" on Mar 9, 2010 8:20:57 AM.
I had Genius Bar visit with same issue—no go (was advised to reset to factory settings).
BUT here is the SOLUTION as it happened again:
1. set auto shut-off to never
2. turn OFF MobileMe syncing for calendars on the iPhone (from Settings menu)
3. wait for calendar entries to be removed—takes minutes if you have several calendars
4. hard reset iPhone (press Home and On/Off at the same time for >5 seconds), and wait 2 minutes (about the time to reboot)
5. restart iPhone
6. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu)
Message was edited by: Arjon Stellinga
Message was edited by: Arjon Stellinga

Similar Messages

  • Select List View All submit option

    Hello everyone,
    I currently have a select list that each value is a submit page item. Is there an option to combine all values and have a view all value in my select list. Please let me know of any options.
    Thanks
    Ryan

    Hi All,
    Got a message from cini007, but I get an error message when I want to reply to that message. I have copied the "solution" below.
    I have tried this, but it's not working. The only thing happening is it has changed the dates randomly.
    Although I have been looking for the auto shut-off option. I can't find that option only in the alarm clock options?
    cini007 posted "Re: iPhone calendar + List View All Calendars option (MobileMe)" in "iPhone calendar + List View All Calendars option (MobileMe)" on Mar 9, 2010 8:20:57 AM.
    I had Genius Bar visit with same issue—no go (was advised to reset to factory settings).
    BUT here is the SOLUTION as it happened again:
    1. set auto shut-off to never
    2. turn OFF MobileMe syncing for calendars on the iPhone (from Settings menu)
    3. wait for calendar entries to be removed—takes minutes if you have several calendars
    4. hard reset iPhone (press Home and On/Off at the same time for >5 seconds), and wait 2 minutes (about the time to reboot)
    5. restart iPhone
    6. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu)
    Message was edited by: Arjon Stellinga
    Message was edited by: Arjon Stellinga

  • My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    The dark bar is caused by the option "Show metadata below image".
    Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
    Regards
    Léonie

  • "View All" Mail Option Gone!

    I seem to have inadvertently deleted the option in mail on my iphone 5 to view all mailboxes. My mailboxes are all there individually, but there used to be an option above all the mail boxes to "view all" mailboxes. Does anyone know how to restore this?

    that happened to me the other day... here's what i did (hope it works for you)
    1.  Click on Mail  (go to view where you can see all of your Mailboxes)
    2.  Click EDIT
    3.  CHECK the ALL Inboxes option 
    4.  Click Done - you should be able to see it now
    when this happened to me, somehow i had unchecked it, only the CHECKED items appear

  • TS4006 Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Is the device lost or stolen? If so it may be turned off, not connected to the internet, and/or have a dead battery in which case it may never appear.
    The what next is then covered in:
    If your iPhone, iPad, or iPod touch is lost or stolen
    Reporting a lost or stolen Apple product

  • Sync my iphone calendar with MobileMe for the first time without deleting?

    I never used iCal, I only us the calendar on my iphone to remember appointments. Now I just got MobileMe and I want my iphone calendar to sync with mobileme (obviously for the first time). But when I turn on MobileMe calendar sync on my iPhone, I get the message that if I save that setting, all my events will be deleted from my phone!
    How can I start using MobileMe on my phone without losing all my events/appointments??
    And what's the logic behind this behavior? I don't get it.

    childlost,
    This is the expected behavior. When MobileMe Push is enabled on the iPhone, it replaces the existing information with what it finds on me.com.
    I'd recommend following this guide for the initial setup: http://www.apple.com/mobileme/setup/iphone/mac.html
    Hope this helps,
    Raleigh

  • Phone List View: "Call Log" Option Not Available

    I recently upgraded from BB 8830 to BB 9630. With the 8830, I was able to display my Call Log on the phone screen, but I can't seem to make it happen with the 9630. According to the User Guide for the 9630, I should be able to change the Phone List View field to "Call Log." However, "Call Log" does not appear in the drop-down list of options on my BB. My choices are Most Recent, Most Used, and Name. What am I missing? Please help!

    If this were possible, there would be a setting for this.
    Not possible.

  • For some reason itunes is not displaying the version of iphone i have or all the options ??

    any one else had to deal with this issue ??

    From the article:
    Note: Downloading of previously purchased movies is available in the United States only.

  • IPhone Calendar List View Extends Back Only One Year

    My iPhone calendar List view extends back approximately one year despite the fact that I have calendar entries extending back to 1999 and that older data is visible under the Day and Month views. This is a problem because the only search mechanism in iPhone calendar is through the List view. Therefore, any search I conduct extends back only to the data in the List view ... which means back only one year.
    Does anyone have any thoughts or suggestions on how I could change this such that the List view extends to include ALL of my calendar entries and is in conformity with the Day and Month views? (I wanted to ask if anyone knows how to "correct" this, but perhaps Apple has designed it this way to speed-up the searching in List view ... I'm not certain.)
    I am currently running the most recent iOS update, am syncing my iPhone calendar via MobileMe, have upgraded to the new version of the MobileMe calendar, and have ALREADY reset my sync. history, deleted my iPhone calendar and re-synced it, etc. These don't resolve the problem.

    I've noticed that the date to which the List View will "look back" will change depending on software updates or syncs.
    For instance, a few weeks ago my List View went back to December 2009 ... now it goes back to Jan. 2010 (i.e. I lost a month of "look back"). I do not specifically recall what triggered this change, but I reset my sync. log during this period.
    If you make no changes to the sync. log or update the software, the List View start date will stay constant I believe. For instance, if the List View goes back to Jan. 1, 2010 right now it should stay that way until you reset the sync. log or update the iPhone software. Theoretically then the List View can "look back" much longer than 12 months assuming you make no changes to the sync. log or update the software. Of course, this doesn't address our issue here, but I thought I would point out that there seems to be a consistent pattern here and not some random bug screwing things up.
    I'm still thinking that this is the way Apple intended it to work. In other words, that Apple felt it necessary to limit the calendar search feature to approximately 12 months worth of calendars. I hope I'm wrong.

  • Is Calendar List View Available in ios7?

    I liked the old "list view" in calendar, but it seems to be unavailable in ios7 (using an iphone 5S).  That is the view where events were shown as a list which you could scroll through.  No mention of this change in the new iphone user guide, it only discusses the calendar view.  Is the list view still an option, or is it gone? I also find the new, dimmer background and font colors in ios7 unhelpful, is it possible to adjust them?  These are the ones in mail and calendar primarily.

    I put the letter l in the search bar and all of a sudden my list appeared.  Don't know whats going on.  If I tap cancel on that screen, it reverts back to the month calendar with only the days calendar entries 

  • Calendar shuts down on list view

    I could use some help. Lately, whenever I go to the List view on my calendar, it closes itself down. It was annoying, but not debilitating. Now, however, it seems that the calendar is "set" to List view and as soon as I try to open it, it shuts down immediately. So now, I effectively don't have a calendar at all on my phone.
    Any thoughts on this?

    I was having this problem, too: I could use Month and Day views without problem, but List view would cause the Calendar app to exit. I could also use List view on a single calendar without problem, but selecting "All" calendars and returning to List mode would cause Calendar app to exit.
    The solution (works, but is far from ideal), is to reduce the number of calendars you are syncing to the iPhone. List view is now working for me with five calendars being synced. (Prior to the version update, my 1.1.4 iPhone was syncing 8 or 9 without problem.)
    Hopefully, they'll fix this in an upcoming release, and we can go back to more calendars again.
    -g.

  • Calendar in List view different from Day and Month view

    When I look at my Calendar in 'List' view all of the Birthdays and Events are in the wrong date but in 'Day' and 'Month' view they are correct. 
    Has anybody found a fix for this yet?  I have looked at similar discussions but they are all a couple of years old and none seem to have found the solution

    It looks like I have found a solution - it is to do with the birthday dates - if you delete the year of any pre-1932 birthdays it solves the problem! 

  • Calendar 'List view' bug

    I'm still patiently awaiting a fix from Apple (who are apparently aware) for the bug discussed at length in another thread which has now been archived. See here... http://discussions.apple.com/thread.jspa?threadID=2470805&start=60&tstart=0
    Further to that thread, I have noticed that this problem does not occur when changing entries while connected to my home 3G network.
    When I go abroad I disable Data Roaming and only use Wi-Fi. Changing any appointments then somehow corrupts the dates of nearly all the other appointments but only in List view. All appointments on MobileMe still show correct dates so it is only on the iPhone's List view.
    Whether this is due to being in a different time zone (Time set automatically in Settings) or Wi-Fi, I don't know.
    Please Apple... fix this bug.

    In my Calender I have the same bug. I haven't found any help.
    Emil

  • IOS 7: Unable to push calendar events to iPhone/ No iPhone Calendars Available

    Hi, so I have an iPhone that is not properly merging with iCloud calendar events. As in: the events in iCloud are not pushed down to the iPhone Calendars app.
    I can see the events via www.icloud.com
    I've turned calendars off/on.
    Deleted the iCloud account and re-added and merged with iCloud.
    I've deleted the iCloud accout, deleted the data from the iPhone, then reset all settings and tried to sign in and merge again.
    All email calendars are turned off.
    I'm using the same Apple ID that has the calendar events.
    When I open the Calendar app, it won't allow me to add a new calendar event either.
    Then when I press Calendars in the Calendar app it only has the Birthday calendars.
    There's nothing that says: iPhone calendars.
    When I press 'edit' it doesn't allow me add a new calendar (iPhone/Work/Birthdays).
    Is there any Setting/troubleshooting that I can change/do so that the iPhone Calendars option re-appears?

    I had all sorts of headaches trying to get this to work. But yes, you can do a 1-way sync from Outlook to Google Calendars to make sure Google has ALL your events. You then turn on sync on the iPhone, so the three are in sync.
    What I did (do not try this at home ) is I deleted my Google Calendar and turned off sync on the iPhone (deleting the calendar data from my iPhone). I started with ONE source of appoinments. I then removed/reinstalled the Google sync app on my PC and initiated a 1-way sync from Outlook to Google. Now Google had a brand new calendar with all my appointments. I then turned on 2-way sync between my PC and Google. Next step, turn on calendar sync on the iPhone. That way all the appointments from Google (which are all the appointments from Outlook) downloaded onto my iPhone. Voila!

  • ADF mobile: how to link task flow to a list view item

    Hi
    I am trying to build a mobile app in adf and i created a popup on the left button on the header. this popup has a list view showing few options.
    now the requirement is to click on the option and navigate to that feature (which is created as a task flow).
    so, i am not sure how do like the task flow to the link in the listView of the popup. Please advise

    Well, if that list contains all features, you can use the 'features' from the ApplicationFeatures DC (they contain the ID, name, ... so you can use #{row.id} instead of hardcoding it).
    If that list does only contain a few features, you can make your own list.
    In your own backing bean or data control, you can get all the features by using:
            ApplicationFeatures af = new ApplicationFeatures();
            af.getFeatures();And filter them.
    An example that I made/use myself:
    It uses an commandLink to navigate because I need to be able to 'disable' (= not clickable) some features (it has the same look as an ListView).
    So iff just use the getFeatures(), you can use the ListView for navigation.
    <amx:iterator var="row" value="#{bindings.features.collectionModel}" id="i1">   
            <amx:tableLayout width="100%" id="tl2" inlineStyle="background-color:White;">
              <amx:rowLayout id="rl2">
                <amx:cellFormat width="50px" height="50px" halign="center" id="cf4" valign="middle"
                                inlineStyle="border-bottom:thin solid #b8b9c8;">
                  <amx:image source="#{row.icon}" id="i2" inlineStyle="width:40px;"/>
                </amx:cellFormat>
                <amx:cellFormat width="100%"  height="43px" id="cf3" valign="middle"
                                inlineStyle="border-bottom:thin solid #b8b9c8;">
                  <amx:commandLink text="#{row.name}" id="cl1" inlineStyle="color:Black; font-weight:bolder; font-size:110%;"
                                   disabled="#{!row.enable}">
                    <amx:setPropertyListener from="#{row.id}" to="#{pageFlowScope.feature}" />
                    <amx:actionListener binding="#{bindings.resetFeature.execute}"/>
                  </amx:commandLink>
                </amx:cellFormat>
              </amx:rowLayout>
            </amx:tableLayout>
          </amx:iterator>This my own data control :
    public class MenuDC {
        private ExtendedFeatureInformation[] features;
        private String message;
        public MenuDC() {
        public ExtendedFeatureInformation[] getFeatures()
            ApplicationFeatures af = new ApplicationFeatures();
            this.fillExtendedFeatureList(af.getFeatures());
            return features;
        private void fillExtendedFeatureList(FeatureInformation[] realFeatures)
            message = "";
            ModelController.getSingletonModelController().refreshMinorTables();
            features = new ExtendedFeatureInformation[realFeatures.length];
            for(int i = 0; i < realFeatures.length; i++) 
                boolean enable = true;
                FeatureInformation fi = realFeatures;
    if(fi.getId().equals("be.kpd.newDayReport"))
    if(ModelController.getSingletonModelController().getVarFormLocalDB(HardcodedVarCodes.LAST_SYNC).equals(""))
    enable = false;
    if(fi.getId().equals("be.kpd.overviewDayReport"))
    if(ModelController.getSingletonModelController().getRegisDFromLastSevenDays().size() == 0)
    enable = false;
    if(!enable)
    message = "SYNC_NEEDED";
    ExtendedFeatureInformation efi = new ExtendedFeatureInformation(fi.getId(),fi.getName(),fi.getIcon(),fi.getImage(),enable);
    features[i] = efi;
    public String getMessage() {
    return message;
    I made my own POJO which implements the FeatureInformation interface,
    because I needed an extra boolean attribute for disabling some features.
    public class ExtendedFeatureInformation implements FeatureInformation {
        private String id,name,icon,image;
        private boolean enable;
        public ExtendedFeatureInformation() {
            super();
        public ExtendedFeatureInformation(String id, String name, String icon, String image, boolean enable) {
            super();
            this.id = id;
            this.name = name;
            this.icon = icon;
            this.image = image;
            this.enable = enable;
        public String getId() {
            return id;
        public String getName() {
            return name;
        public String getIcon() {
            return icon;
        public String getImage() {
            return image;
        public boolean isEnable() {
            return enable;

Maybe you are looking for