IPhone Docking Station with USB Sync port AND Clock/Radio/Hi-Fi Function?

Anyone know of any?
Had a quick google, just got shown loads of cradles.
Anyone seen any with all or most of the features I listed in the subject field?
(Main ones being USB Sync & play music through)
So that I can keep my phone in the one place and sync it from there.
(Obviously I know you can't sync and play music at the same time)
Or anyone know of any other similar solutions?

Airport Express USB port does not support data - only printers. You need the Airport Extreme if you want to share a hard drive.
I'd be interested to know if you can achieve your goal with one AE, although I'm starting to suspect that you need two AEs or you need to connect your original non-apple router to the AE via an ethernet cable. Hopefully someone will prove me wrong.

Similar Messages

  • Home Made Dock Station with HUB OTG mode and Charging !

    Hi,
    I just want to share my hard work with you guys !
    New Video
    Old Video
    Some Pictures
    All information how it's work etc you can find on my website
    https://sites.google.com/site/sonicboomworld/
    Regards and Enjoy !

    Awesome work!
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Thunderbolt Docking Station with 2 Ports...

    I'm new to the forums. Please forgive my noob status. I have a Belkin Thunderbolt docking station with 2 Thunderbolt ports (as well as a number of other useful connecting ports). My MacBook Pro has 2 of them also. If I connect my MacBook with TWO cables, one in each port, will this double (or at least increase) the transfer speed to and from my laptop, over and above the use of 1 TB Cable?
    Thanks!
    docrocker1

    That dock is designed for one TB input from your Mac.  The other ports on the dock are for additional TB devices to be connected.  They are not made for parallel inputs.

  • I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning)

    I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning). I would be glad to get your help.

    If you get the 30 pin dock get an Apple genuine adapter the rip-offs often do not work correctly
    If you buy a lightning dock a company called Sandberg makes the reverse adapter ,I have one and it works correctly
    As tonefox said i got the sandberg from Amazon

  • Usb expansion dock station with arch

    Hi guys,
    I'm the owner of a dell xps m1330 and i was wondering to buy the kingston exapsion dock station with the video out. It is connected to the laptop using a usb cable.
    I know it works with winzozz obviously, but i don't know anything about its support with linux.
    Is there any problem to transmit video out through usb to the dock and then to the external video lcd?
    thanks in advance

    What kind of video card do you have?
    Just from my Dell XPS m1530, I have a nvidia card and within "System >> Preferences >> NVIDIA Server Settings", I am able to plug in a VGA cable on the side and have it recognize it almost instantly. I know tried it on a projector but still, it that worked, I would say you should be ok with the monitor part.

  • Can I connect my iPhone 3GS to a docking station with a lightening connection

    I have a docking station with a lightening connection, can I attach my iPhone 3GS to it?

    No.

  • Problem using docking station with ipod 5th generation

    just bought an ipod touch, 5th generation, with the Lightening connector. Bought an Acoustic solutions docking station with the same small lightening connector but when I dock I can only charge the ipod and not play music through the docking station. Does anyone have same problems playing music with a 5th generation ipod that has the new small lightening connector?...I bumped into someone at Argos who said they are having the same problem not being able to play music from the new iphone 5 that has the lightening connector and even if you use a adaptor to make it 30 pin connector compatable it still doesnt work, any help will be appreciated, thanks

    Does Acoustic Solutions say it will work with your model iPod and iOS 7.0.4?
    Have you went to their support site?
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    Sometimes an iOS updates breaks compatibility and yo will have to wait for iOS update or an update to the dock's firmware.

  • Trouble using Airport Express Base Station with DSL modem, Router and Hub

    About 18 months ago, I had an Airport (802.11b) with WAN & LAN ports and modem hooked up to support two laptops, a Titanium Powerbook G4/600 and G3/400. The setup went from DSL modem -> Linksys router -> to Airport -> Hub (which had desktop and ethernet laser printer plugged in). The network worked fine.
    Then, I got a G4 iBook to replace G3/400. Wanted to get 802.11g to support “g” Airport card in iBook. Got a Linksys 802.11g Wi-Fi with 4-port router for $50. Hooked it up directly with DSL modem. (Couldn’t get it to send out to hub). Hooked the desktop and ethernet laser printer into Linksys Wi-Fi/router. The only way I could use the printer was by having it be a shared printer from the desktop. This was often problematic.
    Two months ago, I got a refurbished Airport Extreme Base Station. I can’t get the AEBS to interface directly with the DSL modem, so I hooked it up as follows:
    DSL modem -> Linksys router -> to AEBS -> Hub. I plugged my Epson 820 (USB) into the AEBS and can see it to print to.
    I have a static IP. That info is entered into Linksys router. Router set as Gateway, with DHCP enabled. AEBS is set to Connect using Ethernet, Configure using DHCP. Network setting: Distribute IP Addresses is unchecked.
    Here’s my issue:
    I can’t see the ethernet laser printer. It will occasionally flash available, but is gone in less than a minute. The printer is HP 2100 series.
    Sometimes I can connect to the desktop G4 tower; most times I can’t.
    I have checked and double-checked the cables.
    Both the printer and desktop are connected to the Hub.
    What can I do so that I can see the HP 2100 series printer and the G4 tower?

    Don,
    Thanks for the suggestions. Glutton for punishment that I am, I tried this again, “just for grins.“ The six other times I tried this, I couldn’t get the AEBS to “see” the Internet. And lo, this time it worked. Here’s the setup now:
    DSL modem -> AEBS -> 4-port hub (which is connected to G4 tower and HP 2100 Ethernet printer). My USB Epson is connected to the AEBS, and I can print from the laptops. AEBS is set up: manual IP info, Network: distribute IP address; share a single IP using DHCP.
    When I still couldn’t see the desktop G4 and the Ethernet HP 2100 connected via the hub (not), I got a flash. I had swapped out the cable a number of times to no avail. Then I realized, the hub is old and all the cables I was using are the new CAT5s. I dug out an old four-wire with RJ45 connectors that my husband made years ago (probably a cross-over cable). It was quite an effort as the cable is 30 ft. long and wrapped around the perimeter of the office behind desks and file cabinets, entwined with all the other wires. But I plugged it in and, Shazam! I am WORKING!
    And, Don, thanks to you, I have eliminated the router from my gaggle of electronic boxes.

  • Connectivity Issues with USB 3 ports on macbook pro

    Hi,  I have a zoom r24 which is no longer working as an audio interface with my new macbook pro.  I have read a lot about issues with USB 2 devices not being compatible with USB 3 ports on the macs. This seems to be midi as well as audio devices.  Can anyone recommend or point me to a list of supported devices for both audio and midi which are guaranteed to work with a late 2013 macbook pro retina display.  I cant afford a thunderbolt device.  Thanks steve

    Just a wild thought here, but have you tried inserting a powered USB 2.0 hub between the MacBook and the interface?

  • Can I connect a USB 2 sound card to a Macbook equipped only with USB 3 ports?

    Hello,
    I just learned I might have to purchase a new Macbook because my USB ports are fried and I was looking at purchasing a refurbished Macbook pro from 2012:
    http://store.apple.com/ca/product/FD101LL/A/refurbished-133-inch-macBook-pro-25g hz-dual-core-intel-i5
    the only trouble is I make music with a MOTU Audio Express sound card, and it only has a USB 2 port and a bus-powered Firewire (which I don't like using since it hasn't been too reliable in the past).
    http://www.motu.com/products/motuaudio/audio-express/summary.html
    Unfortunately, it seems that the Macbook I'm looking into purchasing only has USB 3 ports, and I looked for info on USB 3->USB 2 adapters online and this simply doesn't seem to exist. The only info I managed to find on this subject was this little bit on the Apple website:
    Can a USB 2 cable be used to connect a USB 3 device to my computer?
    If the device end of the cable fits into the connector on the device, yes. However, because it has fewer wires, you won't get USB 3 speed and power may be limited to 500 mA.
    does this mean that I can connect a USB 2 cable from the USB 2 port of the MOTU sound card to the USB 3 port on the Macbook? I'm OK with the power and the speed being limited to USB 2 power, I just want to make sure I can actually use my sound card with this new Macbook.
    Thanks!

    I think I'm understanding this a bit more now.
    Here is the cable that I use:
    http://www.amazon.ca/USB-Cable-Type-Male-Black/dp/B00183I7EE
    The Type A part is the one that I'm currently putting into the Macbook and the Type B part goes in the sound card.
    Would this work with a USB 3.0 port on the Macbook?
    Thanks for your time and patience...

  • Ipod to home stereo with usb audio port only

    I'm trying to connect my ipod to my home stereo but the stereo only has an audio USB port (not RCA L and R audio ports). Is there a cable available that will go from the ipod (or Dock) to a USB audio port?
    Thanks

    See this for how to connect to a home stereo.
    http://docs.info.apple.com/article.html?artnum=60962

  • I can't keep my iphone 3gs paired with Lincoln Sync.  It seems to lose it when I shut my phone off at night.

    I can't keep my iphone 3gs paired with Lincold Sync after upragding the IOS to 5.  It seems to lose the pairing if I turn my phone off.  Help!!

    The message I have on the itunes wi-fi sync screen is "sync will resume when "computer name" is available.  I know the computer is available because I am working on it and even opened iTunes.  In addition, I verified the computer name was the correct computer name on this computer. So.... what would make it "not available"?

  • Laptops in docking station with lid closed go to sleep during in-place migration from XP to Windows 7

    We have an issue where existing XP laptops are targeted with SCCM 2012 OSD TS for upgrade to Windows 7.  The laptops are in a docking station, with the lid closed.  The laptops are going to sleep when the OSD is booted in WinPE, just before the
    Setup Windows and Configmgr step.  I have copied powercfg.exe from a Windows 8.1 machine (both AMD64 and x86 versions) to the MDT Tool package...." and then a step to run:
    %DeployRoot%\Scripts\%PROCESSOR_ARCHITECTURE%\PowerCfg.exe -setacvalueindex 381b4222-f694-41f0-9685-ff5bb260df2e 4f971e89-eebd-4455-a8de-9e59040e7347 5ca83367-6e45-459f-a27b-476b1d01c936 0
    However, the laptops are still sleeping during the Setup Windows and Configmgr step.   Any insight to correcting this will be extremely helpful.

    Hi
    We came across this issue, seems odd that SCCM doesn't suspend the power management in the OS during the TS - (But then again it also seems odd that Windows 7 will go to sleep if you close the lid of a laptop half way through a shutdown, so that when you
    lift the lid it wakes only to complete the shutdown, did MS not spot that, or choose to ignore it!?).
    These commands should be run soon after the Setup Windows and ConfigMgr step and will disable the device and screen from sleep/hibernating:
    Prevent sleep during OSD (Battery power)
    cmd.exe /c powercfg -x -standby-timeout-dc 0
    Prevent sleep during OSD (AC power)
    cmd.exe /c powercfg -x -standby-timeout-ac 0
    Prevent monitor off during OSD (Battery power)
    cmd.exe /c powercfg -x -monitor-timeout-dc 0
    Prevent monitor off during OSD (AC power)
    cmd.exe /c powercfg -x -monitor-timeout-ac 0
    Prevent hibernate during OSD (Battery power)
    cmd.exe /c powercfg -x -hibernate-timeout-dc 0
    Prevent hibernate during OSD (AC power)
    cmd.exe /c powercfg -x -hibernate-timeout-ac 0
    At the end of the TS, you can revert these changes by running the following command to reset the power scheme:
    powercfg -restoredefaultschemes
    Hope this helps
    Thank you.  However, we did put similar steps in our Task Sequence right after the "Setup Windows and..." step, but the issue we are having is that the "Sleep" occurs during the "Setup Windows and...." so it never reaches
    anything after that step until the lid is opened.

  • My iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?

    my iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?

    If the battery was empty (and it may then take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

    I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

    Applications should not disappear all by themselves.
    If they are then that coud indicate serious problems with your hard drive.
    Backup everything up as quickly as possible.
    Using Disk Utility verify your system disk.
    Allan

Maybe you are looking for

  • WLST command line utility "storeUserConfig()"  is not working for 12c OHS

    Hi All, I am facing issue with WLST command line utility with "*storeUserConfig()*" command. I have installed Standalone OHS 12c (Not managed OHS with WLS), configure and start the Node Manager. I start the WLST command line utility from : <MW_HOME>/

  • Routine in MM Pricing - Base Value

    Dear friends, I want pass values from Tax Procedure to MM pricing procedure. Here the requirement is to calculate discount after considering the excise. The excise value resides in Tax Procedure(TAXINN) and the discount value is in MM Pricing Procedu

  • Query Report Using Shuttle List

    Greetings I am using Apex Version 4.2 At first, I had created an item P31_JOB_CATEGORY that was a radio button. Upon selecting a value for the radio button, a report was generated. The query is as follows select a, b, c from Table A where A.Job_Categ

  • Want to show  A/R Invoice No   like gipl/00001/08?

    My question is that in    A/R in voice NOis showing like..1,2,3....10             first of all  if i want to show like  GIPL/00001/08  ... increment middle digit by1 in INVOICE NUMBER  Is it Possible? if i want to show like  GIPL/00001/08  ... increm

  • Whenever I open MS Office Word 2013, then Adobe Reader 11.0.09 crashes! How to fix it?

    I recently started using windows 8 and I noticed that if I'm working on a Word document and I try to open a PDF file, Adobe will crash and then I won't be able to open other PDFs. It's the first time I notice this issue but it's really important to o