IPhone has different IP address then WAP with Static Address

I have several WAP's throughout the house but when I am in my office where I have a Linksys WAP54G set with a static IP (1921.168.1.200)address (which all of them have) and I connect my iPhone to it, the iPhone gives me a whole different IP address (192.168.1.46) then what it should be? I can ping the right address from my iMac, I can direct access it using the browser at the 200 address but when the iPhone connects to the address it shows the 46 address? Any ideas why? I can't really tell you if any of the other WAP's (some are Apple and some are Linksys) act this way, I am going to check it out though.

No longer an issue

Similar Messages

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

When i want to change the security questions they sent an email to a different email address then the alternate email addresses

when i want to change the security questions they sent an email to a different email address then the alternate email addresses

The reset link will send reset info to the rescue email account that you put on your account - alternate email addresses are different email addresses, they are not used for resetting questions.
If you don't have access to your rescue email account (you won't be able to change it until you can answer your questions) then you will have to contact Support in your country (and which is therefore on your iTunes account) to get the questions reset.
Contacting Apple about account security : Contact Apple for help with Apple ID account security
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then change your rescue email address for potential future use (but it can't be the same as any other address on the account) : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID

Controller detected its ip address by machine with MAC Address

Hi
I am getting error "Controller detected its ip address x.x.x.x using my machine with MAC address xx:xx:xx:xx:xx:xx"when i upgrade my Cisco Wireless Controller 5508 from 7.0.116.0 to 7.4.110.0. Any suggestion
Regards

Hi Mohammed,
If you have more then one controller ??
Could be:
1.Error suggest that it hase detected a duplicate address(its managemnet IP address fo WLC) is in used by a client with the mac address xx:xx:xx:xx:xx:xx.
Please chekc the management interface IP on each controller.
2. Looks like u enabled LAG on controller ?
Means you have connected more then one port from your controller to different switches.
regards

Aironet 1100 with Static Address

Hi All
I have taken over some access points from a company which were providing our wireless service and have not yet received the IP scheme information.
I need to get onto one of the Aironet 1100 access points to see what the config etc is.
I will only be able to take it down for a few hours, how to I actually connect to it.
I am pretty sure it is configured with a static IP address which I do not know so is there anyway of connecting to it without using the Reset to Default method obviously!
I have tried IPSU and a hub but no good.
All replied gratefully received!!
Darran

Thanks for the replies guys but it hasnt solved my problem.
Looks like it's not a static address after all
I have done the following
1. Plugged the AP into a switch on our network and connected to it wirelessly. I receive an IP the very same as if I was plugged into the switch directly and when I do an IPconfig I get the very same info as if I was plugged directly in. Still cannot find the AP IP Address though.
2. Plugged the AP into a switch on our network and connected to the switch and did a show cdp neighbour, the access point does not show up, only other switches.
3. Read the user guide and connected my laptop directly to the AP with a CAT 5 cable and gave the laptop an address of 10.0.0.2 . The AP does not seem to revert to 10.0.0.1 as suggested in the manual.
4. I have tried to run the IPSU under all the above conditions, searching by the mac address of the AP but it has not received anything.
ANy other ideas, Im at my wits end!!

How to set default email address for contact with multiple addresses.

Apologies if this has been asked before, it seems a very basic question but I'm unable to find an answer.
Can a default address be set in Address Book for a contact with multiple addresses? Or if not, which address does it send to "automatically" when this condition exists? I know you can manually select the address you want to use, but what if the contact is added to a group?
Thanks
Denis

Thanks for the reply, buy I have no idea what this means.
I have the same question. I have a contact that has five email addresses. When I add the person to a group, Mail automatically selects one of the addresses, but not the one I want. I need to go back and manually select the correct address. Can't I select one of these addresses as the default to be used all the time?
Apologies for not quite understanding the first reply.

Choosing an email address on contacts with multiple addresses

Has anyone found a way, using Siri, to choose which email address to send to when a contact has multiple addresses? She asks which address would you like me to send the message to and I have found no way to verbally choose and address.

You cannot rename the labels in Outlook except by modifying the Contact form. Which, as a developer, I can do. However, my fear is that it won't be pushed to the iPhone since they already have unique identifiers now and they are only showing up on the iPhone as "email". While it may be that Exchange only labels them as email Android devices equate E-mail to Business Email and E-mail 2 as Home Email by default.
Maybe the next iterration of Siri will allows us to chose first, second, or third.
Thanks for trying!

Sending to a group: Which address for member with multiple addresses?

Hi. I've created a Group of people to send emails to. Some of these people have more than one email address. How do I change the default email address for individuals within a group?
Thanks!

Searching for "group address" (without the quotes) in Address Book Help would lead you to the following article:
Selecting which addresses to use for members of a group
iMac G5 17" (iSight) Mac OS X (10.4.4)

IPhone has different Apple ID from MacBook

On my iPhone I am unable to update apps or purchase anything in iTunes because I do not know my iPhone password and I am unable to update it. I used the same ID & pw for years, with my iTunes account on both an iPod and iPhone without difficulty. I have had a MacBook now for a couple of years and accidentally started a second Apple ID. Since that time, I have had problems off and on with my password and ID's. At the moment, I am unable to update apps or purchase anything from iTunes on my iPhone. I have tried resetting my password, but everytime I do, it resets the password for my computer instead of my original ID. This is SOOOO annoying! Any suggestions?

You can log out of your account on your phone by tapping on it in Settings > Store, and you can then log in with a different account
Any content that you download from the store is tied to the account that downloaded it, so if they are different accounts (e.g. if the id on your phone is not a previous version of the account that you are logged into on your Mac) then any apps etc that were downloaded on your phone by the currently logged in account will remain tied to that account, so only that account will be able to download updates to those apps.

Find my phone has different unchangeable id then my appleID after update iOS7

I was able to update to iOS7 after refreshing repeatedly and wiping my phone but when I attempted to restore my phone The Icloud information that was stored is tied to an email account I no longer have access too as it has been deleted this is preventing me from using a restoring my iphone.
my Apple ID i was using on my phone prior to this was updated to use a different Email please help.

i cannot sign in via appleid.apple.com it doesnt work with any credentials i have ever used.
updating to IOS7 caused me to restore.https://discussions.apple.com/message/23019624#23019624

TS1363 while updating my IOS to IOS 6 the updating process couldn't be completed for unknown reason and my iphone has nothing but a black screen with an apple and a meter that shows no progess. it completely froze!

When updating my IOS 5.1.1 to IOS 6 and after the download completed the updating of the iphone couldn't be completed for unknown error and the device froze and all i have now is a black screen with an apple and a meter that shows no progress I can't switch off my iphone or do anything!!!

Hi,
I had a similar problem last week with my nice shiny 3 week old iPhone 6. I noticed the Apple logo was on the screen, but it did not progress like a normal boot up. I restarted the phone, and it showed the Apple logo, then a red screen then cycled back to the logo and kept looping. I got the phone to the iTunes connection stage by keeping hold of the power button and the home button until the apple logo appeared then kept holding the home button. iTunes recognised the phone, and wanted to restore, but this was unsuccessful because the phone would keep looping to the red screen and iTunes failed. After loads of Apple support, I was told it was a hardware failure, and like you I live more than an hour away from the store. None the less, I made an appointment with the Genius bods, and they replaced the phone. They said they had never heard of the problem, but really, take a look at these forums and you will see that it is a common problem and I suspect they are keeping it under wraps...
My issue is that as a disappointed customer with faulty goods, why should i have to stick to an appointment to get it replaced? What other store would you have to do this?
The "Genius" didn't even want to see the phone powered up before offering a replacement... Oh, and it turned out they didn't have the exact same model as a replacement so they were going to send me out of the store empty handed.... I kicked off BIG time, and they very reluctantly gave me a phone from the sales stock, rather than the repairs stock..
Not a happy Apple customer anymore, and I feel the more people who know about the lack of service and customer care the better. They need to get off there high horse and join the real world!

Apple mixes my address in thailand with my address in cal. and refuses my apple id

I live in Thailand but my credit card is from my leagle address in calif. Somehow Apple has these two addresses mixed up and dosen't allow me access to the to the apps store - sheesh! After 5 hours the keep me in some loop never accepting me. Interestingly, apple lists all telephone numbers as 800 series, not useful in forign countries!
Thanks for you attention, michael

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Smartforms - problems with output preview when vedor has different languag

Hi all,
The output preview does not work when vendor has different communication language then english?
Exact description of the problem described by the functional people:
"For the Latin America countries that use the SMARTFORM today, we have noticed that if the vendor has communication language English, the PO is displayed fine in the Output preview in iShop. However, if the vendor has communication language e.g. ES maintained in the vendor the output preview fails. We would like to have it so that even if the the vendor has a different communication language than EN maintained on the vendor the PO should be able to be displayed in the output preview of the SRM system."
So has enyone encountered this problem before? All help is appriciated!
Thanks in advance!
/Armin

Well the problem was that the language pack with Sapnish language was not installed.
Thanks for the answer 2p 2u!

Network setup 'DHCP with manual address' changes to 'Using DHCP'

I have setup my local network with a manual address and have observed that the setting changes without my doing to simply Using DHCP. I can't get the setup to continue using a manually assigned ip address. Even though I've saved the network settings preferences, they revert to 'Using DHCP'. Any ideas? Thanks in advance.

If you "have setup (your) local network with a manual address," does that mean you have disabled DHCP in your router? If so, then you'd want to configure "manually" in your Sys Prefs > Network.
Or did you mean that you have setup a computer on your local network with a manual address using DHCP? (And that your router has DHCP enabled?)
If the router's DHCP is enabled, many routers will allow you to set aside a subset of IP addresses to the DHCP pool, and the remainder are, by definition, reserved for static addressing. Are you assigning the computer requiring a static IPA (but using DHCP defined gateway and subnet) an address falling within the static address range of your local subnet?
If you can't partition the address space between static IP addresses and DHCP-assigned IP addresses when DHCP is enabled, are you assigning a high-numbered IP address to the computer whose Sys Prefs has DHCP with manual address?

TA44551 when you have you ipod pugged in and i will not charge and you have tried it on two different computers what is wrong with it

i have know idea what has gone wrong with my ipod but it wont charge at all and i need it to fix because i have lost the reciept to the ipod there fore i cannot take it back and get a refound please can someone help me to fix it i dont want to spead alot of money to take it to the apple store it would be great if you could help.

Place it in recovery mode by:
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes

IPhone has different IP address then WAP with Static Address

Similar Messages

Maybe you are looking for