Iphone/ipad/ipod charger wire wont work for iphone or ipod but does work for ipad very strange

guys this is so odd and pointless but for some reason my charger wont let my iphone charge or ipod but it works for iphone. iphone running ios 7 same with ipad. any solutions?

Hello there, Kareem77.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
If the issue persists, the first article also refers to this:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Feature setting Masterpage & CSS doesn't work when included in SiteTemplate - but does work when activated manually

    Hi,
    I'm experiencing a strange behaviour recently. I wrote a feature with an EventReceiver that sets the masterpage and alternate css file for the current spweb it is activated for. When I activate that feature manually it works like expected. But if I include
    the same feature in a SiteTemplate and it is called during site-creation, it doesn't work. I debugged it and stepped through it. As far as I can tell everything looks right. It sets the masterpage and css file like it should and throws no error. But when the
    site loads in the end, it suddenly still uses the v4.master and no alternateCSS. How can that be?
    If I deactivate the feature then manually and activate it again, it works...
    Here's the feature:
    const string masterPage = MyOfficeProcess.master";
    const string searchMasterPage = "MyMinimal.master";
    const string alternateCss = "MyOfficeAlternateProcess.css";
    public override void FeatureActivated(SPFeatureReceiverProperties properties)
    SPWeb web = (SPWeb)properties.Feature.Parent;
    using (SPWeb topLevelSite = web.Site.RootWeb)
    string relativePath = topLevelSite.ServerRelativeUrl;
    if (!relativePath.EndsWith("/"))
    relativePath += "/";
    if (web.WebTemplate == "SRCHCENTERLITE" || web.WebTemplate == "SRCHCEN" || web.WebTemplate == "SRCHCENTERFAST")
    web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + searchMasterPage;
    else
    web.MasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
    web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
    web.AlternateCssUrl = relativePath + "Style Library/My/" + alternateCss;
    web.UIVersion = 4;
    web.Update();

    Hi,
    You can put a copy of your master page within the template site, use that for the site's master page, and then save the site as a template then check whether it works.
    Here is a similar thread for your reference:
    http://sharepoint.stackexchange.com/questions/30699/featureactivated-not-called-for-site-template
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • IPod Classic 80Gb, wont show up in iTunes 8, but does in Finder

    Just plugged my iPod classic 80Gb in and it wont show in iTunes 8, although it shows up in Finder
    Tried a iPod reset. restarted my Mac but no good.
    Come on man I need to do a sync....

    I have a similar problem.
    This morning, all music was gone from my iPod, just like that. I had been having troubles with playing a couple of songs last night if that's connected. Anyway, I connect it to my Macbook. I try to reset it through iTunes and that was done, I pressed eject and ejected it when it said OK to disconnect -- although when I did so it said it wasn't ejected properly. Now when I connect it appears in Finder as a device (like that thingy that appears when you install stuff, a white thing) but it doesn't in iTunes. In fact, as soon as I plug it in iTunes freezes and I can't open it or do anything in there, the marker just shows that it's loading.
    What do I do?

  • Printing NOT working from PS CS3 - Z3100 but DOES work with Lightroom 2

    I have been printing on a Mac with PS CS3 using a Z3100. All has been fine. Today I'm trying to print a 46x54" image from PS. I have not been able to make this work. PS sits for a while, thinks for a while, chews up resources, hangs on occassion as reported by the Activity Monitor, and then .... nothing. PS sits there and the print goes away. The job never appeared in the print monitor. I did all the usual. Rebooted the world, reinstalled the HP Z3100 drivers, and the same thing. I then gave it a shot, after many hours, and thought I'd try Lightroom 2.0. Holy mother of Michael Phelps, the print job was submitted in no time and the job is humming along with no issues. The only issue is that Lightroom is not showing Absolute Colorimetric as an option which I use and chose Perceptual instead.
    The file size was 1.2 GB and 16-bit. I lowered to 8 bit for PS and still to no avail. I printed in 8-bit on LR 2.0.
    Is this an issue with Photoshop? I'm running a Mac Pro Quad with on OS X 10.4.11 and 6 GB of RAM.

    Something has gone wrong with how Lightroom finds and communicates with Photoshop.
    That could be a registry string, or some preference within Lightroom.
    The Lightroom forum is more likely to be able to help you solve this.

  • I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger

    I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger. I cannot sync it, and the computer doesn't detect it. It charges in the charger, but as soon as you unplug it, the ipod shuts off. Doesn't charge in the computer at all.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • When I go to yahoo with my iPhone 6  the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong?

    When I go to yahoo with my iPhone 6  the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.

    Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.

  • Mmmm.. Well why is Massage sent voice and Battery charging voice wont go in iPhone 4 ? eh

    Mmmm.. Well why is Massage sent voice and Battery charging voice wont go in iPhone 4 ? eh

    well...sorry, but use your brains  please! it was very simple actually what i've asked about. but i was so messed up to find out these options in iPhone 4 even used all type of google searches and forums but didnt find out anything usefull, so thats why my question style actually feels "like im DRUNK!" lol...
    anyhow i repeat my question "IS THERE ANY OPTIONS OR TABS IN IPHONE 4 SETTINGS TO TURN OFF MASSAGE SENT "WOOF sorta sound" and BATTERY CHARGING SOUND (WHENEVER WE PLUGGED IN CHARGER WITH IT YOU HEAR A TUNE) and yeah one more thing " That Dialer sounds too" ?
    or Apple just  wants to dictate thier users or customers with giving no such Customizing! ?

  • I recently noticed a kink in the top of my iPod charging cord I tried to straighten it out but now my iPod wont charge.

    I recently noticed a kink in the top of my iPod charging cord I tried to straighten it out but now my iPod wont charge.

    Try another charging cable. It is very likely bad.

  • HT4113 ipad password is giving me problems, works on wallpaper to unlock but does not work for restrictions or reset

    ipad password is giving me problems, works on wallpaper to unlock but does not work on reset or restrictions

    You can try to remember or get the passcode somehow. If not, the only other option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • IPad syncing stays on step 5 of 5 "waiting for items to copy" but does not copy anything...  should I restore the iPad?

    iPad syncing stays on step 5 of 5 “waiting for items to copy” but does not copy anything...  should I restore the iPad?

    Hey, I was having the same problem,, i just got mine to work. Take off everything but your apps (meaning take off pictures, music, ringtones, movies, tv shows, etc just leave on the apps) Then go up to the top and go to Store and turn off Genius. Restore your iPhone (It'll ask you to back up, click yes.) Restore from back up, Let your apps come back then when those are done add each category one by one. (i.e. click Photos -> Sync Photos and let them finish, then click something else like music) Hope this helps!

  • My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

    My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

    Hi there tsubert,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

    Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

    Hello SavannahSweetie,
    I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
    Start with this section, and work your way down if needed.
    Basic troubleshooting
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
    Verify that you are in range of your Wi-Fi router or base station.
    Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
    Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
    Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    All the best,
    Sterling

  • My ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !

    my ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !

    Since you have already isolated it down to your home network, if following Steve's instructions do not fix your issue, contact your Internet Service Provider or Router Manufacturer and make sure your network is set up according to this information: iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Incoming Email not working for one web app, but IS working for others in same farm.

    I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates.  It works just fine for two web applications, but it will not work for one particular
    web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
    application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
    if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
    does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
    the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site.  The App Pool and Timer
    Service accounts have rights to the folder and to the library.
    The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
    The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
    ID:
    Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
    Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
    reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
    This did not fix the issue for the case mentioned above.
    What could possibly be the issue preventing incoming email from working on this one web application?

    Thanks for your reply.  Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause.  As noted, _other_ emails send to http://workingapp are working just fine.  I can send two emails - one to a library on http://workingapp
    and another on http://notworkingapp.  The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly.  In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
     So clearly, the timer job on WFE1 is running and attempting to process the file.  For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
    WRT to #1, I have done this already (as noted in the original post).  I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed.  If I return it to http://workingapp it is processed.  In other
    words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library.  I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
    the alias.  Once done, emails sent to the alias are not processed.  I then do the reverse, and it works again.
    On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
    In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp.  Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
    - the problem is bound to http://nonworkingapp
    I'm not sure what you mean by "steps to reproduce the issue".  If I knew that, I would probably be able to solve the issue.  The best I could come up with to describe the situation would be:
    Set up SP 2010 in a three-node configuration with multiple web apps
    Enable incoming email and confirm it works
    Migrate to a SP2013 SP1 farm in a three node configuration.
    Enable a new email alias for a library
    Observe that it doesn't work for one web application.
    Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

  • Why won't my iPad air charge anymore? I bought a new cable but it still doesn't charge, it is only 3 months old.

    Why won't my iPad air charge anymore? I bought a new cable but it still doesn't charge, it is only 3 months old. 

    If you are still having problems with your iPad, it is still under AppleCare.
    Bring it into an Apple Store to have it diagnosed and repaired under warranty.

Maybe you are looking for