Iphone/Ipad/Ipod connection issues

Question

I have configured the above router and everything works fine apart from connecting new apple payment devices via the inbuilt AP. I can connect my windows 7 laptop and browse the network and internet but cannot connect my iphone or ipad /ipod touch, device always replies with error unable to attach.
I am using static ip address on all devices.
Below is a copy of the wireless config i have created, if someone could shed some light on an error somewhere it would be much appreciated
Building configuration...
Current configuration : 1915 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
Hostname Pors-WAP1
logging rate-limit console 9
enable secret xxxxxx
no aaa new-model
ip domain name porsche.co.uk
dot11 syslog
dot11 ssid porsche
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 wpa-shared-key
username Cisco password 7 password
username admin privilege 15 secret password
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid porsche
antenna gain 0
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
Channel 2462
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
hold queue 160
interface BVI1
ip address 10.10.23.160 255.255.255.0
no ip route-cache
Ip default gateway 10.10.23.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
end
Many Thanks
Kennedy

Answer 1

Can you please try if it works with wpa version 2 and AES rather than wpa and tkip?
Rating useful replies is more useful than saying "Thank you"