Iphone locked up while updating to i0S6 will only show itunes logo on screen w/ usb
my iphone has locked up and will only show the itunes logo with a usb port and an arrow ? Have rebooted both the iphone and the computer with no change.
Try restoring it if iTunes recognizes it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Similar Messages
-
HT4061 My iPhone 3 screen will only show iTunes logo with a USB plug how do I fix this
I need help my iPhone 3 screen only shows a iTunes logo and a USB plug
The device is in recovery mode. See this support document. http://support.apple.com/kb/HT1808
You may have to do this more than once. -
My ipod will only show the dead battery screen and wont taking a charge.
my ipod will only show the dead battery screen and wont taking a charge on any of my sinc cords or my outlet charger. And I have checked that nothing is in the plug port blocking the electrodes. What do I do now?
Put the device in DFU mode (google it) and restore via iTunes.
-
My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work
Have a look through this Doc
http://support.apple.com/kb/TS3281 -
I just tried updating the most recent software on my 3GS (on my Mac) but it said the updated on my phone failed. Now my phone is frozen and only showing the itunes logo and USB cable. When I connect to the USB lead, its says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Have I lost all the data on my phone?
What should I do?
Help!
MThe iTunes logo and cable indicates that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
For the 3004 error code does the troubleshooting for it on the page that you posted from not help ? -
iphoto 9.5.1 shows mpeg-4 video files as a thumbnail, but will not play the video. When try to play video it shows as a black screen. Other video files play ok- (mpeg, .mov). What do I have to do to view them? If I use imovie they will play, but I sometime like to view them in iphoto. It worked before I upgraded to 9.5.1 and 19.9.2 of the operationg system.
Select the thrumbnail of one of the videos and use the File ➙ Reveal in Finder ➙ Original menu option. That should take you to the original mpeg4 file.
If it does then try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT -
Help my iphone is frozen in a screen with iphone logo and usb cable. Happened while I was updatting.
plug it in youre computer and hold the power button and the home button for 30 seconds and then it should have a blck sctreen then press the on button for 15 seconds and an apple logo shoul appear. please answer my problem.
-
How to recover from frozen iPhone that will only show apple logo?
my iphone 3gs has frozen up. i turned it off for a flight today and when i turned it on to listen to some music the apple logo comes up and never goes away. also, when i got home to attempt a synch to itunes and to see if a synch would fix the problem, neither the computer (windows) nor itunes will recognize the phone. i have attempted to reboot it several times, i rebooted the computer, i removed the SIM card and reinserted it and nothing is resolving this problem. any ideas or proposed solutions?
Try a hard shut down by holding the power button down (one on top) and the home screen button down at the same time. After 5-10 seconds the phone should shut off.
After that wait a bit and try and restart.
Hope that works! -
Why is my phone stuck after downloading the newest update?
Most intelligent people would plug the device into the computer running iTunes as suggested on the screen and follow the on-screen prompts.
-
My ipod touch 4G will only show apple logo, and can't be turned on and off?
It eventually runs out of battery but that doesn't change anything. All i can do is hold down the power and home screen button simultaneosly for a while. After this it flashes white then black then back to logo. Anyone know what to do? I plug it into my computer and it doesn't show up or anything. Any suggestions? my itouch hasen't had problems before or anything.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPhone 4S has locked up while updating the ios. what do I do?
my iPhone 4S has locked up while updating the ios. what do I do?
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. Then try it again.
-
My phone is locked up while updating software on iTunes showing iTunes symbol and a connector. It has been connected to iTune for a long time. How doI restore my phone?
Click the restore button.
Use iTunes to restore your iOS device to factory settings
If you can't update or restore your iOS device - Apple Support -
How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
MY iPhone 4 after being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.
Ive tried using wifi and 3G seperately. Ive tried restarting the phone. Ive tried restoring it from a backup but none of these have worked yet.
-
This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.iOS: Unable to update or restore
Maybe you are looking for
-
Can not find virtual copies in Windows folder.
I can not remember to have encountered this before, so here I go: I just created a virtual copy of some photos from my summer holiday, and all works well. But when I needed to access these photos going the Windows' way (Windows/My Pictures that is),
-
I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list. The problem is when I add a new item in the list the following err
-
What exception should I use?
Hi, all: I am trying to learn how to use Exceptions, and I'd like some advice: in the network I'm creating, each node should have 4 edges--one to each neighbor in the north, south, east, and west. I want to create an exception if a given node has mor
-
How do I create a bleed for an irregular shaped vector?
I am trying to make stickers. I have created a few images (vectors), added cutlines but i have no idea how to add a bleed to the outer edge of the image to prevent "white space" when the printer cuts it out. I am using CS2 and i am a noobie. Please c
-
Week later, still trying to publish. Ain't nobody got time for this. Did Lightswitch fail to edit the web.config? Shouldn't the deploy have re-written _IntrinsicData to local\SQLEXPRESS? The first image is from IIS7 trying to open the Configuration e