IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines
iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?
Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU!
Similar Messages
-
Iphone 5 screen is stuck on itunes logo and USB cable?
iPhone 5 screen is stuck on iTunes logo and USB cable. Reset does not work.
Place your device in recovery mode as explained here:
iOS: Unable to update or restore -
IPhone 4S went dead after software update
My iPhone 4S is telling me to connect to iTunes after latest software update. I can't do this as my laptop is not working at the moment. Any ideas on what I can do
The same happens to me. It don't work in my phone the apple logo does not appear.. I tried to do a hard reset to my phone because it was frozen and now it seems like the phone is dead.. need help please..!!
-
Downloaded iPhone 2.0 software update to 2.1 now stuck in restore mode
After syncing iTouch tonight if offered an software update from the 2.0 firmware to 2.1. After paying the $9.95 for the udpate the iTouch is now stuck in recovery mode. When you plug iTouch into computer w/the USB is stays it needs to be restored/recovered. After the 20 minute download. Still nothing. Screen shows a cd and asks for the USB cable. Tried to unplug and while holding home button in plugging back in and same thing. Their software update...nothing found in troubleshooting.
OK, so the restore completes without error but then you get the same thing afterwards?
Let's try the new user:
1. Go to Control Panel > User Accounts
2. Click on "Create new user"
3. Follow the prompts to create a new computer administrator
4. Restart the PC and log in to the new account
Once you're in the new account, open up iTunes and try to restore the iPod. Note that it will download another copy of the iPod software.
CG -
I have the iphone 4s. Ive tried to update my phone & its stuck on the connect to itunes screen. Ive tried to even restore my phone then update & i still have a error for both of them. I have the latest version of itunes & went through all the other steps. Its still not working & stuck on the connect to itunes & im growing extremly fusterated.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
After an ipad software update, it does not recognize my Ipad in Itunes. Gives error 14. what to do?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
after syncing i was asked to update software to %.01. Now itunes no longer recognises ipad and screen on ipad only shows cable...otherwis dead..
Try the information found in this link;
http://support.apple.com/kb/TS3281 -
Well, the title just about tells it all! It can find the network connection, it just won't choose it automatically as it did under Snow Leopard. Any suggestions? Cheers
There have been hundreds of posts re: this issue. I suggest you begin browsing through them starting with those you should find over on the right side of this page.
-
After software update I can't drag songs from iTunes directly into Garageband timeline, always could before, how can I fix this?
Same problem here but figured it out: Drag the song from the Media Browser tab (after selecting iTunes at the top) at the bottom right when you open a new GarageBand project. Hope this helps you -- working perfectly for me!
-
Nokia E71 - after software update from PC suit - p...
Nokia E71 - after software update from PC suit - problem started for GPRS connection showing "no network connection'
I am using vodafone service, also saved setting many times but it didnt work.
How to solve the problem? also wanted to know hard reset or 3 finger reset process and steps.Menu » Tools » Settings » Connection » Access points » Options » New access point
For the reset, does this help? Because Vodafone operates in different countries with different settings, in which country do you live? -
HT1338 iphone 3gs cant be activated after software update to ios5
iphone 3gs cant be activated after software update to ios5
What does it say when you look at Settings=>General=>About=>Carrier?
Which version of Cydia is on your iPhone - the one with the black & white
icon or another one? What color is the Cydia icon? -
iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?
Hi! It seems you found a bug on iOS 7.1
To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
1. Turn on Siri (settings > General > Siri)
2. go to (Settings >Passcode > Voice Dial) trust me, it appears now
3. disable Voice Dial
4. go back and disable Siri
hope this could help you!! -
Iphone could not activate after software update
iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
Iphone 5 stuck in portrait after software update
iphone 5 stuck in portrait after software update wont unlock i can see the lock symbol but cant find it in menu
Try swiping up from the bottom very bottom edge of the screen to reveal the Control Center. You should be able to turn off the rotation lock there (Round arrow with a lock in the middle)
-
My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?
Helo, I asked your question to be moved... good luck!
Maybe you are looking for
-
Error while creating a datasource in planning 9.3.1 on oracle 11.2 database
I am unable to create datasource in planning 9.3.1 on oracle 11.2 database. I have configure sharedservices and registered planning with shared servers. I am unable to create data source after application deployment and instance creation. I am gettin
-
While saving sales order, deleted item resulting in error
Dear All I am facing an issue while changing Sales Orders. I have set a check in a user exit that if batch is empty, display an error message. I add try to add a new line item which doesnt have batch. When i try to save, i get a message which is fine
-
Help Creating a "Scenario Clock"
Hi! I'm not new to Java, but I am having a big issue trying to find a specific clock that I'm looking for. I want a clock that displays the current time (Including day, month, and year), but I want to be able to set the clock to a time and date of my
-
Switch WS -3750G-12S have problem with console logging
Dears , please help me in this problem I have switch 3750G-12S but when we access in the switch by putty give me un knowing sample as below only when move and insert the cable in the console switch port : ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒}▒▒▒}▒▒▒▒▒▒▒▒?▒▒▒▒▒▒
-
How To Install Live Type In 10.8.3
Hi My self Varun, My English is not Good. I am using 10.8.3 and i have Final Cut Studio 2.0 (48.52 GB) 1st i installed rosetta from my 10.6 installer In 10.6 DVD there is a folder name Optional Installs.mpkg, run it and install rosetta, bcoz FCS 2 wo