Iphone won't connect to tomtom via bluetooth after ios 4.2 update

iphone 3GS won't connect to tomtom via bluetooth after ios 4.2 update. So no handsfree

This is exactly the same issue that happened to me I've contacted Telus my service provider and Apple and spent countless hours on the phone with both they seem to be blaming each other for the problem Apple says it's a network problem while Telus says it's a hardware problem this happened right after I updated to 4.2 myself need help here no support. Lovvvveeeee this phone but what the $&@!'

Similar Messages

  • Won't connect to ipad via Bluetooth

    why won't my iPhone connect to my iPad via Bluetoot?

    Well, I should have asked Pagancelt not sleeky as he said above he says he DID it.
    I quote:
    Re: iPad won't connect to iMac via bluetooth 
    Apr 29, 2012 3:35 PM (in response to mccass)
    I was successful in connecting my iPad and 27" iMac via bluetooth for the purpose of internet sharing, so it can be done. I was able to use my iMac's free wifi connection (which the iPad couldn't pick up, as I don't want to stand by the window) to get internet on the iPad. I forget how, unfortunately, which is why I'm back in the forums - my connection went down!
    *Edit: Foolish me. My iMac shows up under "Devices" on the iPad Bluetooth pane in General Settings. All I had to do was tap it to revive the connection (since I paired the devices the first time I set up the connection). iPad is now getting internet off iMac again :-)

  • TS3297 Anybody else having issues connecting to the App Store after iOS 6.0 update?  I am using an iPod 4th gen and am having issues with a blank screen on the App Store.

    My 4th gen ipod touch won't connect to the App Store after I updated to ios6.0.  It just gives me a blank screen no message or anything.

    hi! im using an ipad2 and updated to ios6 last 3days ago. since then my app store is blank and is prompting an error saying cannot connect to itunes.

  • IPhone 4s No Longer connects to Car Bluetooth after iOS 7.1 Update

    My iPhone 4s has been paired to our 2006 Acura TL hands free link (Bluetooth) and working flawlessly for more than a year.  After the iOS 7.1 update installed on my iPhone the connection has been lost and the car's Bluetooth does not recognize, and will not pair with my iPhone anymore!  I noticed there were two back-to-back updates for iOS7.  The first one caused intermittent interruptions and lost connections with the iPhone.  The second update completely destroyed the connection between the car bluetooth and the iPhone.  Any ideas on how to correct this problem would certainly be appreciated.  Thanks!    

    Hello algee1,
    Thank you for the details of the issue you are experiencing with pairing your iPhone with your Acura.
    In my experience, when updates are released for iOS devices, compatible devices release an update to maintain compatibility.  Step 2 from the article below recommends checking with the manufacturer of your car stereo to see if there is a firmware update available for your car stereo:
    2. Update software and firmware if necessary
    Verify that both your car stereo and your device have the latest software versions. Contact the manufacturer to see if any updates are available. If your device does not have the latest version of the iOS, update to the latest software version.
    I recommend reviewing the full article here for additional troubleshooting steps:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    I also recommend these steps if the issue persists after following all the steps in the previous article:
    Unable to find nearby Bluetooth accessories
    If a pairing record already exists, the device does not appear as discoverable. Try to connect the device using that pairing record.
    If you are unable to connect using the existing pairing record, delete the record and pair again.
    Ensure that the firmware or software on the Bluetooth accessory is up to date.
    Ensure that the Bluetooth accessory is charged or connected to power.
    Verify that the Bluetooth accessory is using a profile that works with the iOS device.
    Turn off both the iOS device and the Bluetooth accessory, then turn both devices on again.
    If the issue persists, test Bluetooth with another device or consult the manufacturer's documentation.
    You can find the full article here:
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/ht1664
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Brand new iPhone 4s won't connect to ANYTHING via Bluetooth. Is there a fix to this?

    I purchased a 4s yesterday.  I was reluctant but took the dive.  I am incredibly disappointed to find that the bluetooth does not work with ANY other bluetooth device I try to 'discover.'  It can't even DISCOVER other bluetooth devices!  By what I've read online, this has been an issue.  Does anyone know if there is a fix and what it is?  I'd sincerely appreciate the guidance!!  Thanks!

    This may help as well... http://support.apple.com/kb/HT1664
    What BT devices are you trying to connect to?

  • IPhone 5 does not connect to iPhoto 9.0 after iOS 7.1 update

    I have been using iPhoto 9.0 (version 8.1.2) on my Mac to get the photos and videos from my iPhone 5 since I got the phone.  It stopped working today after I updated the iOS on my iPhone to 7.1.  Now when I connect the iPhone to my Mac, the iPhoto thinks there is no photo on the iPhone.  I have tried the hard reset of my iPhone and it did not work.  Any suggestion is welcome.

    I have figured it out.  I used iTunes to set up the connection with the iPhone.  iTunes is able to detect iPhone and it triggers iPhone to ask for "whether this device can access your phone" question.  Once that is set, the iPhoto 9.0 can detect the iPhone too.

  • My iPhone 4s's wi fi is not available after ios 7.1 update

    I updated my iPhone 4s from 7.0.4 to 7.1 and the next morning my wifi had stopped working. It's usually greyed out and is completely unavailable. I tried restarting a couple times. One time it wasnt greyed our and let me connect to my wifi (typed in the password and everything). But as soon as I tried to load anything or refresh anything it just sat there loading until it would say connection not available. It's now greyed out again. Does anyone know if there going to be working on another update that may fix this. Or has this update fried the actual wifi chip inside my phone.

    Sorry, chip or a weak solder connection has fried .  This has happened rarely after every update since 1.0.1, and with every iPhone model.  The update is stressful on the phone when burning the firmware and marginally functioning components may fail.  Try the steps described in the support article below, but it's likely that you'll have to replace the phone.
    iOS: Wi-Fi settings grayed out or dim
    Do NOT try the "freezer" or "hairdryer" methods you may see. At best they're a temporary fix and likely to do further damage to the phone.

  • Connect the iPhone to iTunes under Windows 7 via Bluetooth

    Is it possible to connect the iPhone to iTunes under Windows 7 via Bluetooth?

    No. File transfer by bluetooth is not supported.

  • My iPhone won't connect with my computer or charge. How can I fix this?

    My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
    How can I correct this?

    I forgot to mention, the iPhone does charge via wall plug.

  • Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hi Tomiwa,
    You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
    There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
    That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

  • How do you get iPhone 5 to connect to iMac through bluetooth?

    How do you get iPhone 5 to connect to iMac through bluetooth?
    I know the basic steps, but all I get is pairing unsuccessful. I'm using an older bluetooth, would that make a difference? I got connected once with a Motorola bluetooth, but can't reconnect. TIA!

    Try the Bluetooth Troubleshooting steps here:
    http://support.apple.com/kb/TS2756
    Note that you need to have Personal Hotspot set up with your carrier and on your iPhone before you can connect the computer.
    Regards.

  • Why won't dropbox documents print via bluetooth to a pima ip100

    Why won't dropbox documents print via bluetooth to a pixma ip100 from a Mac Pro.  The ip100 prints gibberish continuously until it is unplugged.  There is no other way to stop the printing.

    Pages can save documents to PDF format, but does not open them natively. Use iBooks or one of the many free apps available for that purpose on the App Store.

  • IP Address Is Duplicate and iPhone Won't Connect

    Everything was working for last 2+ years, then my modem died yesterday. I replaced it, but can't get back to where I was. I ended up restoring network to factory settings and then doing connection.
    I have AT&T DSL service. When setting up the connection with my AirPort Extreme, have Ethernet with Bridge Mode. I receive message that "another device on the network is using your computers IP address." I didn't have this issue when setting up 2+ years ago. So, I manually changed the IP address, but this caused a message about DNS not being correct, which I ignored, because this at least gave me access to Internet, and I didn't have to "borrow" from one of my neighbors unprotected networks. I have implemented WPA2 security (which I had prior to this also).
    Issues I now have are:
    - iPhone won't connect, and it did before all this
    - HP Photosmart printer (which is wireless) also won't connect, as it did before
    I assume that all my issues are from not configuring correctly, and that it revolves around the IP address conflict.
    Any assistance?

    You need to do a Factory Default Reset on the AirPort Extreme (AEBS) to clear out all the old settings and IP conflicts.
    Pull the power plug on the AEBS
    Hold in the reset button and while you continue to hold it in, plug the power back in to the AEBS
    Release the reset button after 10 seconds.
    Open AirPort UTility and set it up again to Create a wireless network.
    It's easiest to click Continue and follow the guided setup.
    Ignore the Double NAT message when/if it appears.
    I know this works. I have the exact same equipment on my desk now.
    Message was edited by: Bob Timmons
    Message was edited by: Bob Timmons

  • Why does iPhone (3gs) sound better than Macs via Bluetooth?

    Why does my iPhone (3gs) sound so much better via Bluetooth on my (Jawbone) Jambox than my new Mac Mini or 3 year old MacBook Pro?  Proxmity is about the same and doesn't seem to make a difference.
    sound from via Bluetooth sounds muted like in a cave or can, pretty darn good from the iPhone, ideas? (in a test I did with a Braven speaker via Bluetooth = same, in that case the Macs sounded even worse!)
    Thanks,
    Paul

    If I were you then I would have asked this question in the mac forums
    as people there have a much much higher chance of owning those macs then people in the iphone forum who could own windows computer or linux computer or no computer at all

  • IPhone 5 wont setup airplay via Bluetooth. iPhone 5s will successfully setup airplay via Bluetooth.

    iPhone 5 wont setup airplay via Bluetooth. iPhone 5s will successfully setup airplay via Bluetooth.
    Both iPhones are 7.1.

    Is the Apple TV up to date?
    Note: airplay still requires both to be on the same wifi network. The bluetooth feature is only for discovery, in place of using bonjour, and most useful for business/school networks.

Maybe you are looking for