Iphone4 syncing issues
Hi,
I cant sync my iphone - i've done what the following link asks:
http://www.apple.com/support/iphone/assistant/itunes/
but once I restart...no "bubbles" pop up and I dont know what to do from here...is there another way I can set this up?
Just now reading your response... I gather that you were on step 14 here: http://support.apple.com/kb/HT2292. Note that it says that this popup may appear; sometimes it doesn't. Rung msconfig again and confirm that the things you deslelcted are still deselected. If they are, just click Cancel to close msconfig. and proceed to try syncing again.
If syncing fails to sync then your need to back and undo the msfig changes: run msconfig, go to the General tab and select "Normal Startup" (unless you were using selective startup before, in which case you will need to manually recheck all the startup items you were running before on the "Startup" tab). Now restart and your computer will be back to the state it was before you made changes to mscong. Now proceed to troubleshooting security software: http://support.apple.com/kb/TS3125.
If syncing succeeds, then the problem is a conflict with one of your startup programs. The only way to identify which one, is to run msconfig, go to the Startup tab and begin checking a few items on the list at a time, followed by syncing. At some point your sync will fail again and you will know that one of the items added to your startup just prior to this is the cause of the conflict. It's a somewhat tedious trial and error process.
Similar Messages
-
my computer recognizes my iphone4 as a camera is that why I can't get it to show up as a device in itunes?
http://support.apple.com/kb/TS1538
-
Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..
Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth -
Iphone 4 and itunes syncing issues
Not sure if this is an itunes issue or iphone4 + itunes issue
So got the new iphone4 and was able to activate, restore backup and sync additional song and videos. After the second or third sync, Itunes started to crash my windows xp when syncing started. I tried syncing with ipod and iphone 3g to see if it was an itunes issue, but they sync fine. Anyone experiencing this or have any thoughts?
Thanks!Same happening with me, though I can't find the source of what's causing mine to crash. I have not yet synced any music to my iPhone4 so it can't be that. I've deleted my Winnie-the-Pooh book (which i had read elsewhere to be the source) and any free apps that I thought might be the cause too but still, itunes crashes when it starts "backing up iphone".
Can anyone help??
Have just turned my iPhone off and back on again, and deleted an app that I remembered didn't work 100% and now iTunes doesn't crash!
Message was edited by: laurawarren1 -
More Aperture/iPad syncing issues
Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
This process either needs to be improved, or at least documented so users can understand how to avoid these problems.1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
Hope this helps -
Sync issues after iOS 8 update
Hi,
I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
Any ideas how I can solve the problem, would be appreciated. Thank you!Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Disappearing Contacts, Mobile Me Sync Issues, Calendar crash-Answers??
I'll try to keep this post brief but hopefully it will help provide some possible answers for frustrated users experiencing the random complete wipe out of all contacts and calendar data when syncing with mobile me using either push or fetch. After several weeks of experiencing these random sync issues and spending several hours over several days between tech support calls with iPhone then Mobile Me support and then finally a genius bar appointment where the genius said he didn't have a clue and simply offered to replace my phone.
The next morning, SAME PROBLEMS... and through it all NO ONE could tell me why my sync was so randomly unreliable. Every other day for no apparent reason, my phone would suddenly lose all contacts and/or calendar data. (A few thousand contacts and two years of calendar data). It was both frustrating and strange—even stranger that Apple techs had no clue why and seemed to think no one else was having this issue.
I tried everything - complete restores, resets, deleting and re-adding the mobileme account, etc., etc., etc. One tech support person finally said, "good luck..." The others kept handing me off the higher levels of support... until finally they just said "we don't know why this is happening." I was waiting for someone to just say, "Look, we have issues with mobile me, so hang in there and eventually it will work." I can be patient and I still think the iphone is the greatest invention in recent years. But everybody I talked with at Apple seemed to think this should be working flawlessly.
I also started having a crash on the calendar anytime I tried to see the list view for "all calendars." This was frustrating because that's the best feature of the calendar app!
I was prepared to just return to syncing with my computer and wait for the software to improve between the phone and mobile me. Finally, last night I tried a few things that seem to be working... and for the first full day, mobile me is actually useful to me today. (my fingers are crossed!)
Here's what I did.
1. I minimized the number of calendars I was syncing - I have no idea if this affected the sync, but I was syncing eight calendars, now I'm down to four. (You can easily export a calendar and import those events back into a different calendar.)
2. I did a complete restore of the phone (not from a back up) and the VERY FIRST THING, I added mobile me and synced only the calendar (set to push.) This cleared up the random calendar crash in list view and also mobile me was pushing data rather reliably. After a few moments my entire calendar was on the phone and worked perfectly. New events were transferred quickly back and forth.
3. I then chose to sync my contacts through the computer rather than over the air. I fear that the contact sync was somehow messing up the whole communication process between the phone and the cloud. Someone suggested that the number of "groups" in contacts might have an impact on the sync issues as well. I didn't need my contacts to sync with the urgency of "push" so this works for me. Plus I have a lot of contacts and it's just faster over the cable.
4. I then GREATLY reduced the number of apps on my phone. I originally had about 27 and I only reinstalled 9 of them. I did this ONE AT A TIME - starting with the most necessary and useful... and after each install, I checked the functionality of the calendar and mobile me. No problems. Perhaps I was having an app conflict?
5. Then I reinstalled the rest of my content - music, podcasts, photos. Still no problems.
ONE of these steps actually worked, and I'm not sure which one. My guess is that one or more of my apps was conflicting in some way. OR possibly something with the contact sync... but for the last 24 hours the mobile me calendar sync using push has been consistently reliable and useful. (for the record, mobile me email has always worked perfectly for me.)
No one with tech support ever suggested to me that I could be having an application conflict or any other problems with calendars or contact groups, etc. I've spent many hours on this the past few weeks... and for the first time, my iphone seems to be working with mobile me correctly.
In reading many of these posts, it seems a lot of others are having similar problems... so hopefully these suggestions might be helpful. If you have any thoughts as to which of these solutions was the correct one, I would be interested in hearing your opinion.
Thanks!Are your Address Book contacts and iCal calendars/calendar events on your Mac synced with your MobileMe online address book and calendar?
When you say this data is not synced with your iPhone, none of your MobileMe online data is transferred to your iPhone, or after the initial transfer of this data to your iPhone when you first turned contacts and calendars for over the air syncing with your MobileMe account on your iPhone, the data is not kept synchronized with the MobileMe "cloud"? -
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name. -
Having sync issues with Outlook 2011 since upgrading to Mavericks
Hi All,
My work Macbook Pro 13" is having issues syncing my inbox and sent mail automatically. It's a hit or miss if I recieve emails in my inbox in a timely mannor with out pressing the Send/Recive button (even when i press it takes minutes to update). My Sent Items can show up an hour later even if I hit the Send/Recieve button.
All my mail is there and shows up/syncs on my iPhone quickly. I upgraded to Mavericks right when it came out and have only been having these sync issues for the last week or so.
I've cleared my mail cache and that didn't work. My calandar reminders and contacts don't seem to have any issues and no other apps have been preforming slow or strangely.... just my VERY important work email. My tech guys are stumped and I wanted to try you guys before they do a major rehaul of my system
Thanks!A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
How to move your data to a new Identity
BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space. -
ICal refuses to finish 'restore' ; trying to resolve sync issues.
trying to fix sync issues.
using missing sync.
everything worked perfectly for a ling long time before i thought it'd be cute to go in and put birthdays into addressbook, and select the option in iCal preferences to add those events to my calendar.
EVERYTHING has gone to **** since then.
the missing sync guys recommend i backup and restore addressbook and iCal.
addressbook did fine.
when i select the saved ICal database file (icbu) from my desktop, it will not complete.
what gives?
i'm trying to do this to fix another problem.
its like every step is making a new issue.
i am getting close to the edge guys...
pleaes help.
thanks!
c
(overall problem is that i cannot even get missing sync to overwrite my blackberry 8830 now.
for months, iCal, Addressbook, and Tasks synced perfectly.
all was well until i screwed with this stupid Birthday feature.)
Message was edited by: clyde calso, i've already gone into iSync and cleared sync history....that didnt seem to affect anything.
thanks in advance for any insights at all.
c -
IPhone and Windows 7 64 Bit - syncing issues
Hi,
Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
Microsoft Windows 7 x64 Business Edition (Build 7600)
Gigabyte Technology Co., Ltd. P55-UD6
iTunes 9.0.1.8
QuickTime 7.6.4
FairPlay 1.5.18
Apple Application Support 1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number E400D*7E1<Edited by Host>
Current user is an administrator.
The current local date and time is 2009-10-23 19:56:37.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 5800 Series
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: cecad029456cdd284aef514988f34808
** iPod/iPhone Connectivity Tests **
iPodService 9.0.1.8 is currently running.
iTunesHelper 9.0.1.8 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
iPhone, iPhone 3GS running firmware version 3.1.2
Serial Number: 88924**3NS <Edited by Host>
Most Recent Device Not Currently Connected:
iPod nano (5th Generation) running firmware version 1.0.1
Serial Number: YM937**72D <Edited by Host>
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
I am not sure what to do now....Well, the new gigabyte bios fixed the issue.
-
Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4
Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Like many others, I got my new IPad 3 and could not sync all of my photos. The highest I got was 1,000 out of 15,000. Today Apple released iTunes 10.6.1.7 that , among other things, said it fixed the sync issue with photos. I excitedly, erased my ipod cache and hit sync. It looked like it was working, but just like before iTunes locked. This time at 2,244 of 15,000. Anybody have an idea of how to fix this?
What's the capacity of your iPad?
iTunes needs up to 3x of the actual size of the files you want to sync during the sync process. And syncing 15.000 photos could cross the size of the available free space on your device.
Don't forget that the pictures are now optimized for the retina display, so the size increases for each of them.
Message was edited by: Ingo2711 -
Quick Fix to iTouch Syncing issues
I too have seen the problems mentioned in the forums about the ipod touch syncing issues with the january software upgrade option... And i have seen the quick fix that allows you to get it to sync. I will post it here so that eveybody doesn't have to scroll down to the bottom of a topic or search through topics. Please don't reply to keep this a clean topic so others can easily access the information.
*Disconnect iPod Touch from computer.*
*Disconnect computer from internet.*
*Reconnect iPod Touch to computer.*
*Start syncing editing ... whatever*
*Reconnect to internet*
This should hopefully allow you to start syncing again, it is not the ideal solution and I do hope the apple engineers can find a permanent solution. And thanks to the guys who posted the original instructions, I do not in any way take credit for the instructions, only making them more accessible.I REALLY appreciate your help. Your fix worked and relieved a lot of frustration. I have HP everything (Printer, lap-top, desk tops) and was upset there wasn't an obvious "contact" option in the support web-site. I knew if I was allowed to describe the problem, a bright person like you would respond.
-
IOS 6 and iTunes 10.7 WiFi Sync issues
WiFi sync works for a day or two then from the device is just keeps saying Looking for Mario Michela's iMac... I restart iMac, reboot iPhone and or iPad. connect via usb cable, uncheck WiFi Sync (apply), recheck WiFi Sync. It will work again for 2 or 3 days. Then starts to fail again.
I've tried using Eithernet and wifi on the mac (no difference)
I've tried turning off the firewall (no difference)
I've reset all setting on the iPhone (no difference)
I've reset SyncServices Folder (/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsy nc.pl full) -(No difference)
I've called Apple Care 3 times, I keep getting passed around because sync is between product departments.
iOS doesn't support desktop applications, iMac doesn't support mobile devices..
I'm hoping iTunes 11 fixes this issue.. This issue didn't occur prior to iTunes 10.7.I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris
Maybe you are looking for
-
Seem to have an "extra" Library folder...huh?!
Hi all, Up until recently I've been trying to figure out why my home>Library folder had mysteriously moved inside my home>Documents folder. Finally having the time to do some detective work I used Time Machine to see when the change happened....right
-
IPhone 4 cannot detect wifi unless almost next to router
I've had my iPhone 4 for about 2 months now and it could detect wifi at quite a good range. But until recently I have had to get almost completely next to the router for it to detect. It's not my wifi; my sister's phone can detect it at a certain ran
-
Error occuring during downloading &starting the application as an enduser
After synchronising with the server i am not able to start the MIclient it gives the error as "start failed". But before synchronising, MIclient was working fine.This error has occured when i tried to download and start the aplication as an end user.
-
how do you change the screen settings as my game screen is too big for the notebook screen
-
I think i've discovered a bug in iweb! In my brand new macbook and with the latest version of iweb (2.02)installed when i have the airport enabled, iweb can't be opened but crushes! In the case that the application is open and then i open the aiport,