IPhoto change time and date does not work with Flickr

Hello everyone,
In my iPhoto librairies, I do change my photo date and time to set them we they were actually taken. Here, I'm refering especially to photos which are:
* scanned photo
* stiched photo
The issue is:
When I share these photo on Flickr, Flickr sort them with the previous date time setting, even if I have selected to change the original file in iPhoto.
So it is painful to end up seeing that all the work done on iPhoto is not reflected elsewhere.
This issue can only be in iPhoto as the old date time should be swapped with the new one.
Let me know when the fixed will be implemented so I stop loosing precious time editing photos!
Regards,
Francois

I have an Access Database created with Access 2010 installed on a machine running Windows 8 using the Access 2010 Runtime code. For the most part the database works but all reports that require a date in the header come out with ##error. Works fine
with full access on any other machine. Just this one were we are using Runtime. Any ideas?
Make sure you don't have Date used as a Field Name, as it is a Reserved Word in Access and can cause unpredictable behavior.
Also make sure you have compiled the VBA code, before using the Runtime version.
Have error handling in place, to capture errors in your DB.
Hope these pointers help,
Daniel van den Berg | Washington, USA | "Anticipate the difficult by managing the easy"
Please vote an answer helpful if they helped. Please mark an answer(s) as an answer when your question is being answered.

Similar Messages

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Time capsule now does not work with Lion just installed.

Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

Changing the font size does not work with Textarea with HTML Editor

If you change the font size in the text area of a "Textarea with HTML Editor" item it does not work. I've searched the forum and the only solution I've seen is to use an HTML editor foriegn to APEX. Does anyone have a better solution? Thanks, Elizabeth

I'm having a similar issue except with HTML Editor Standard.
What I'm doing is allow someone to write to an HTML Editor Standard field and then an HTML marked up text is saved to a db CLOB column. In another page, I reference this DB column and show it in an HTML Region (I do a computation Before Regions for a hidden item that writes out the html with "htp.p")
Everything shows up fine EXCEPT the font tags and headings. I'm finding that the HTML Region sets the font size only with the < d i v s t y l e="font-size: large" >and NOT < f o n t size:6 >. When the HTML Editor renders the user's text input, any size changes are made with the < f o n t > tag, which is depreciated anyways, and not with "style". That's why the size is not showing up.
I can't really figure out why the headings aren't showing up except maybe the css style in the region is overridding it...
Is there another APEX item type like HTML Editor (which uses FCKEditor) that I can use, or maybe another approach to remedy this issue? Or maybe this post calls for an enhancement with the HTML Editor?{size}{size}
</div>
Edited by: maui26 on Mar 4, 2009 10:43 AM

Canon Pixma MP-540 (and other) does not work with Cups 1.4

Since Cups 1.4 my printer does not work
its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
and lsusb output:
Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
. Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

I upgraded to 4.o and added the fireFTP which I use all the time and it does not work. How can I get this to work?

Upgraded to 4.0, added fire FTP and all of my settings carried over. Now it just sits there and tries to connect. It does not connect. What needs to be done?

Hi vbaio, So far so good. Iran Malware antibytes and Spybot search and destroy after updating them both for the latest updates and so far not one of the pop ups .It is mid afternoon here in Australia and tonight will be the biggest test. I will advise you if it starts up again.Spybot actually I think who came up with the actual bug before I did the scans may have solved the problem.These programs are free here. Tweedle. Thanks again

OFFICE 2013 HOME AND BUSINESS does not work With Blackberry Destop Software 7.1

Hi,
I have read somewhere that I should use BlackBerry Desktop Software 7.0, but where can I found it to download it and install it?
Or when does RIM plan to release a new version of its BlackBerry Desktop Softwware that comply with Office 2013?
Best regards

This is maddening - I simply cannot synch my calendar with Office 2013. When should I expect an update for Desktop Manager that works with Office 2013?

I downloaded the 3.6.15 firefox, however when it comes up it is 3.6.14 coming up and it does not work with some of pogo games what is wrong

word womp will not play because it says firefox has a bug in 3.6.14

Your More system details list shows a Firefox 3.6.14 user agent, so it looks that the update didn't succeed. You can try to update another time.
See also:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)

I bought a digital av adapter and it does not work with ipad2, what do i do?

Bought a digital av adapter and it is not supported by ipad2. What do i do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

I often rely on my Norton Toolbar for sites, and it does not work with the new updates. Can I uninstall recent Mozilla updates until this add-on works with Mozilla, or am I stuck? Thanks!

It's probably really easy to figure this out and uninstall the updates but, well, I'm slightly tech-illiterate! I use my Norton Toolbar a lot for those sites I visit infrequently, and this non-compatibility issue is the same reason I stick with Mozilla over Chrome, but now I can't even use my Norton information with Mozilla. Thanks.

http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

TS2446 I tried the recomendation on how reset and do i cloud a million times and it does not work!!!!!!!!!!!!!!!

This has been the most frustratin experinece in my life. All of the suden , icloud just topped!!! working yesterday. I did everything it says and I need it to do from the support and whatever and it doesnt work!
I need to read MY EMAIL!!!!!!!!!!!!!!HELLO!

Ask a coherent question and there may be help available ...

Drag and drop does not work with multiple images

if i try to drag and drop more than one image, nothing happens, no activity at all. i think i had this problem on another computer and it had something to do with the fonts. i can not remember exactly thanks iphoto 6

Go to font book and use it to make sure the helvetica font is enabled - disable and re-enable it if necessary.
Regards
TD

I downloaded firefox 4.0.1 and it does not work with Norton. How do I load 4.0 back on?

With firefox 4.0.1 none of my passwords or log in names are entered from my norton program. I would like to go back to 4.0 which was working fine with all my systems. Any way this can be done? Below it list my installed plug ins but those are from my laptop which I'm using now not from my desktop which is the problem child.
L

Symantec are due to release updates very soon to make their add-ons work in Firefox 4.0.1. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808
Pending this update, you can go back to Firefox 4.0, their add-ons work in that version. You can get Firefox 4.0 from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/4.0/win32/ - you need to select the folder for your language, you can then download and run the Firefox 4 setup file to install it.
If you do install Firefox 4.0 temporarily turn off automatic updates until Symantec update their add-ons. To do that in the Firefox options window, go to the Advanced panel, and then the Update tab and de-select the option to automatically check for updates to Firefox.

I want to go back to 3.6 because 4 is dangerous and 5 does not work with essential addons and websites. How do I find previous versions to install?

The new major update cycle is way too fast. I want to get off. Please tell me how to uninstall 4.0.1 and reinstall 3.6.4 (MacOS-X). Reading up on the critical vulnerabilities for 4.0 convinced me that I don't need this headache. I've only installed 4.0 on one of my three computers (home). Wait! I see that 3.6.dmg is still in my downloads! Now, I just need to figure out how to uninstall 4.0!

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

IPhoto change time and date does not work with Flickr

Similar Messages

Maybe you are looking for