IPhoto does not show my device

I upgraded to Snow yesterday and everything seems fine with the exception of iphoto 08. When I plug in my Nokia N97 via USB, iphoto automatically launches as it normally would when there is now pictures to transfer from my phone. The problem is, the phone is not listed in the left panel and I have no option to import the photos. When I plug in my Canon Power shot camera, I have no issues. The camera is listed and all the photos on the camera show up in the import window.
Any ideas?

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1591
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Similar Messages

  • IPhoto does not show connected devices.

    We have 2 iMac 27", 3 MacBookPro 17" 2X15", 3MacBookAir in our home. All have ML. In all of them iPhoto shows devices when an iPhone is connected except in one of the iMacs. I looked everywhere for a solution like this one:
    http://www.jasoncoleman.net/2011/11/06/getting-iphoto-to-recognize-your-updated- ios-5-device/
    without success.
    I really need a solution.
    Please help.

    From what I gather, this should do:
    Create a new user account on that Mac. Connect the iPhone, it should show up in iPhoto. If it does, import the photos on it, then delete them on the iPhone. (Eventually, one or more pics remain still on the phone - double-check on the iPhone and delete there "manually".)
    Now, when changing back to your regular user account, the iPhone should show up in iPhoto there, too.
    If so, well, then all is good. If you require the pics from the other user account, log back into it and export the pics from iPhoto to e.g. the Shared folder or an external drive. After importing them with your regular user account, you can delete the "temporary" account.

  • Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

    Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

    what format your iomega HD is it NTFS , if NTFS try download   http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html

  • I have photoshop elements 9 and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences

    I have photoshop elements 9 and iphoto does not show it in my advaced preferences drop down, it used to be there, how do I get it back again?

    Hi, Yes you are correct in iPhoto Prefernces, Advanced tab editing I used to have iPhoto and "Use external editor.". It changed to iPhoto and iPhoto Library. I have einstaleed PSE 9 and downloaded the update.  There is still no lkink to external editor in the drop down box.  Have I done something wrong inadvertently or is there a clitch?  can you reinstal iPhoto.  I am new to Macs. Every thing came preinstalled.  it is the top of the range system with 16 Gb of rRAM, 2 Tb hard drive to top graphics card etc.  I used to be on Windows PC.  Have more than 27,000 photos on the system.  Much apprecite your reply and interest in this.

  • IPhoto does not show photos in my iPhone

    Hi!
    As the title has said, my iPhoto does not show photos from my iPhone, but it DOES recognize that iPhone is connected.
    But before all of this happened, I changed my setting (which I forgot how to reset that) to NOT open iPhoto automatically when my phone is connected.
    And also, a week ago, my iPhone usb cable seems to be spoiled at one end. It can still connect the phone to the laptop, but very loosely - as if some wires inside are broken.
    So I really do not know if the problem I mentioned is caused by my setting OR is it because of my spoiled cable (that it could not transfer the photos from the phone)
    And if it is believed that it is caused by my setting, could you please guide me on how to re-set the whole thing?
    Thank you very much.
    Ps. I can still sync my songs in itunes to my music in iPhone.

    "But before all of this happened, I changed my setting (which I forgot how to reset that) to NOT open iPhoto automatically when my phone is connected."
    Launch iPhtoto.
    In the menu, iPhoto>Preferences>General.
    Change it back.

  • Please help! I have photoshop and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences.

    Please help! I have photoshop and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences.

    I tried it and nothing changed. Even when I right click on an indiviual image all it does is duplicate it. Iphoto seems to be recognizing my external hard drive as an editor......cannot get photoshop except to drag a picture into photoshop from iphoto, and once I have worked on it and saved it to iphoto I cant find it anywhere.

  • When I connect my iphone to the computer iTunes does not show my device but syncs???

    I connect my phone to the computer and it does sync but it does not show my device?  How can I see my device in itunes?

    Hello Crenshaw2332
    With the new version of iTunes, it would be the the left of the iTunes Store icon
    If you like how itunes worked before, I will suggest taking a look at the article that will bring back most commonly used features in iTunes.
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    In iTunes 11 you have the option to turn the Sidebar and the Status Bar on or off; they are off by default. To do this in the menus, go to:
    Show Sidebar - Choose View > Show Sidebar (this feature will display iTunes features on the left side of the application including Library, Store, Shared, Genius, and Playlists).
    Show Status Bar - Choose View > Show Status Bar (this feature will conveniently display the number of items and playback time for a category, for example, music or movies).
    Thanks for your question
    -Norm G.

  • I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

    I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

    Have you already confirmed that you trust the computer?
    Launch iTunes, then connect your iPhone to the computer.
    When prompted, confirm that you trust the computer.

  • IPhoto does not show last import

    iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

    Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
    LN

  • I have downloaded latest itunes but my ipad does not show in devices when I try to sync.  Any suggestions?

    I have just gotten my new ipad!!!  I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music.  Any suggestions??

    Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
    If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
    If you're using an extension, stop and just use the included sync cable.
    Try using a different USB port.
    After you installed iTunes, did you restart your computer?
    Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
    If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site.

  • I have a new hard drive. iPhoto does not show as purchased in App Store although I had it on the old hard drive. How do I reinstall it without buying it again?

    I have a new hard drive. iPhoto does not show as purchased in App Store although I had it on the old hard drive. How do I reinstall it without buying it?
    Thank you.
    John

    Depends on where you got it - if it came on yoru compujter then you need to have accepeted it in the App store - and it will be in your purchases when you log in with the Apple ID that you used to set up your computer - it mahy be hidden - if you do not find it unhide applications in teh App store
    LN

  • ITunes does not show any devices

    My iTunes does not show any devices, even the new iPhone connected directly to the PC.

    Hey rtm56,
    Thanks for the question. I understand that your iOS devices are not being recognized by iTunes for Windows. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/TS1538
    Thanks,
    Matt M.

  • Why does Group created on Master console does not show any device count mapped on the managed Amp?

    Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
    A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
    Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console. 

    Laura Quitugua wrote:
    Hi,
    I have syced my outlook email with my iphone 4s and ipad.
    Note that only the email account info (username, login, server)  is sync'd.
    The actual emails are not sync'd.
    Opening an email on one device does nothing on teh other devices.

  • CD does not show under Devices on iTunes

    I am a new user and would appreciate any suggestions. My iPod shows under Devices on iTunes, and I've had no problem buying music from iTunes store or loading to iPod.
    I have set iTunes to be the default player of music cds but they do not play when loaded (iTunes opens) and the CD does not show under Devices.
    Thanks in advance for any help.
    HP dv6110ca   Windows XP  

    I did run the diagnosics before, and have just run again. As you will see it passes with flying colors - but still is not recognized as a device on itunes......
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Hewlett-Packard HP Pavilion dv6000 (RN907UA#ABL)
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Video Driver: NVIDIA GeForce Go 6150\GeForce Go 6150
    IDE\DiskST98823AS______________________________7.24___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomPHILIPSDVD-RAM_SDVD8821________________EH19___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    E: PHILIPS DVD-RAM SDVD8821, Rev EH19
    Audio CD in drive.
    Found 14 songs on CD, playing time 72:11 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:13:25
    Track 3, start time 09:58:02
    Track 4, start time 14:37:60
    Track 5, start time 20:31:35
    Track 6, start time 25:38:35
    Track 7, start time 31:37:27
    Track 8, start time 35:21:52
    Track 9, start time 41:56:50
    Track 10, start time 47:36:50
    Track 11, start time 52:54:27
    Track 12, start time 58:11:12
    Track 13, start time 63:52:55
    Track 14, start time 68:20:05
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 10 16 20 24.
    The drive CDRW speeds are: 10.
    The drive DVDR speeds are: 10.
    The drive DVDRW speeds are: 10.

  • My ipod touch G2 does not show in devices within itunes

    My ipod touch does not show in devices within itunes.

    Assuming you have a PC start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Amber light won't work, green still does

    I've encountered an odd problem, albeit not that serious. When I first plug my magsafe power adapter in the light on the magnet part turns green, then instead of turning to amber as it previously did it simply goes off. The computer is showing that i

  • Any ideas for a 6x10 batch model

    Hello, I've developed a batch sequence for testing 60 boards in one panel. By multiplexers, we test the panels in groups of 6. Allso there is one serial number per panel. First I had a sequental test for all 60 boards. Then I made ajustments for batc

  • Handling DATE and TIME in SELECT Statment

    Hey pros, I have this problem where I want to execute a select query based on date and time, but I want it to be handled in such a way which is better explained with this example: User enters a date range of Apr. 10 and Apr. 12 User enters a time ran

  • Count of string

    Hi All, I have a  field carton no which is string type.The values are 1 and 2. I gave summary as count for that in report footer .But it is showing 32 .But it should show 2 only. Here the report having 32 records .I tried with changing string to numb

  • Problem to create an ip range collection on sccm 2012 sp1

    Hi everybody, I need to create an ip range query to a collection, i saw a lot of explanations: I create this query for the ip range 10.201.0.50 10.201.0.254 select * from  SMS_R_System where  IPAddresses like "10.201.0.[5-9][0-9]"             or IPAd