IPhoto - mismatch in pictures when trying to insert two-page panoramas.

Hey all,
I am trying to give iPhoto a try by making my photobook from my vacation to the USA in iPhoto. Since I like full control over the page lay-outs I am designing all pages in Photoshop (CS3), en then insert them in iPhoto. All pages for my iPhoto book are therefore set as the full frame 1 photo lay-out, in which I copy my photoshop pages.
I looked up the recommended resolution, and it told me to use files of 3338x2587px, with 300 DPI. I made a photoshop document of 6676x2587px so I could design two pages as one, which would give me the option to insert a photo that is spread over both pages. However, when I insert the file into iPhoto, it does not match exactly. When I resize the resolution to 6636x2587, it does.
Question:
Do you recommend using the first resolution, which is ok in theory but does not show up right in iPhoto's preview, or
Do you recommend using the second option, which shows up perfectly aligned within iPhoto?
Second question, related to color profiles;
Should I embed the sRGB IEC61966-2.1 color profile in my photoshop exports to make sure the colors in the final printed book are the same?

Quelake
Welcome to the Apple user to user assistance forums
I recommend using the one that look the way you want it -- when I do this I pay no attention to the photos size and just place it twice - one on each side of the book and adjust to look like I want - the results have been fine for me.
To some degree over thinking things actually causes issues - iPhoto is designed as a consumer product and works best when used that way - Most people doing that love the results - some people who over adjust and over edit photos are disappointed - not sure if it is because of the over editing or just that they have much higher expectations - but in any case that is what I've observed here - and the books are great
And yes - iPhoto works best with photos using sRGB - you may find some helpful hints here - http://www.apple.com/support/photoservices/preparation_tips/
Prior to purchasing preview using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference
LN
Message was edited by: LarryHN

Similar Messages

  • After 9.5.2 updated, Acrobat crashes when trying to insert a page

    I just installed the 9.5.2 update today, and now I can't insert a page into a PDF or combine files (merge into a single PDF), either. Whenever the file dialog box should open, Acrobat simply quits.
    How can I roll back to the previous version, or fix the problem?
    Running Windows 7 Enterprise SP1 64-bit, Office 2010, Acrobat Professional 9.5.2. If it matters, my computer is an HP EliteBook 8740w with 4GB of RAM.

    May be a 64-bit issue. I just tried an insert with 9.52 on Win7, 32-bit, and it worked fine.

  • Can't find some albums when trying to insert photos into other programs

    I am having trouble finding albums (and thus pictures) when trying to insert photos into a Word document or upload to mySpace/ facebook etc.
    After choosing 'insert<picture<from file<pictures<iPhoto Library' , I have the option of looking into the year-month-date or by album. Since I have a better memory of the 50+ albums I have created rather than their dates, I choose "Albums". This list only contains about half of my albums (with folder icons) and it appears outdated...ie one of the albums no longer exists in iPhoto and has been changed to a folders with several albums in it.
    I'm wondering why this is happening or how i can update the album list. I realize i could use the year-month-day thing but that is too frustrating.
    Carey
    iBook G4   Mac OS X (10.4.3)  
    iBook G4   Mac OS X (10.4.3)  

    Hi chantreya,
    iPhoto 5 now stores the Album information in a data xml file. The Albums folder within the iPhoto Library folder is no longer used. At some point, usually after a rebuild, you will no longer have that folder in the Finder.
    If you need to access photos from an album it is very difficult for a third party application to navigate the iPhoto Library in order to find the photo you need. You will have to know the date of import in order to find the photo.
    There are some third party applications that can read the xml file and can navigate the iPhoto library and show you the Albums. Hopefully more applications will be revised to read this file.
    Until then you will have to Share/Export the photos to the desktop. You can then navigate to the desktop to use the photos (example: web uploading from online photo site)
    If your application supports drag and drop, you can drag the photo from an open iPhoto Library window into your application.
    For email you can also use the email icon within iPhoto to open a message with the highlighted photo attached.
    You can also use spotlight to find images in an Album...
    This is what I have done using Spotlight to find my images that are in iPhoto albums without opening iPhoto..
    In iPhoto, select the album, then select all, go to Photos/batch change.
    Change the comments to text. In the text field I put the name of the Album.
    Do this for each album.
    Close iPhoto.
    Open Spotlight and put in the name of the Album ( you have to remember the names of the albums or have then written down)
    In the spotlight search results. click on "show all"
    Under "Images" click on the "xx more" to show all the images in the album.
    Make sure you have it in icon view, the icon view box is the last one on the blue images line.
    Now you can control click on the image to "reveal in finder", open in iPhoto or Mail, etc.
    I am not sure if this is going to make you happy and it is a little more work, but you can find images in albums and even view them in a slideshow (by clicking the play arrow at the end of the Images highlighted blue line) using Spotlight, all without opening iPhoto.
    One important thing to know is you can set up a graphic program to be an external editor (when you double click an image in the library} such as PhotoShop or PS Elements. You set up that within iPhoto Preferences. Just make sure you save the image flattened and with the same name. The edits will then be relected in iPhoto when you hit "save".
    Two Apple kbs for you to read
    Don't tamper with files in the iPhoto library folder
    About the iPhoto Library folder
    Lori

  • Iphoto keeps quitting unexpectedly when trying to share photos on Facebook.

    iphoto keeps quitting unexpectedly when trying to share photos on Facebook.This only started a short while ago. I never used to have issues posting pictures before. Moreover, it also tells me there are issues with my library and prompts a "repair" of my iphoto library. This is scary - I have tons of pics and I'm not ready to lose any of them! I did change cameras a month ago, but it is the same make as I had before - a Canon powershot SX150 IS. Could it have anything to do with it? Could it be the fact that I keep so many pictures in iphoto (10,000 +)?

    How to backup? You should be doing regular backups - if you are not you will lose all of yoru files and photos sooner or later
    If you are not ready to lose all of your photos then you need to pruchase an external hard drive and start backing up immdeiately - for simplicity I recoommend a Time Capsule and Time Machine - but any backup is better than none - I do two daily
    For this simply make a temporary copy of your iPhoto library
    Will it fix the FB problem - hopefully
    LN

  • Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph

    NOTE:  This IS a duplicate post from the Breakpoint.  Text slightly changed.  The post in Breakpoint can be deleted.  All comments should be placed in this thread.
    I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..  
    I have an existing graphs (qt 6) which originally had 2 cursors.  This occurred while trying to add the third cursor. 
    Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while.  However, I do recall seeing this problem when creating the original cursors, but not to this extent.  Plus I don't remember the original error message from that time.
    I needed to add one more cursor to the existing graphs.  As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message.  Tried it 3 times, same result.
    Here are the steps:
    Shut down the PC, went for a coffee, rebooted the PC.  Opened the LV project, opened the VI.  Immediately went to the graph properties to add the new cursor by doing the following steps: 
    Right click graph indicator icon on block diagram.
    Select Properties.
    Click on cursor tab.
    Click on Add
    Select Cursor 2 (3rd one, newly created)
    Change color
    Select cursor as a line
    Remove checkmark for "show cursor"
    Click OK
    I need to do this to 3 other graphs, same steps.  And as soon as I get to the step before clicking OK, I get the error message. 
    I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties).  But I've had this problem before when creating the first two cursors.
    Is it a bug?  Anyone else seen this?  Using LV8.2.  And the message is right about LOOSING ALL unsaved work!!!! 
    Here are more observations:
    Tried creating a new one on the second graph.  As soon as I clicked on the color, it crashed!
    See the error explanation below.  It is really clear, now anyone can solve it    LOL!!...  According to the error log, there's a bad image out there  
    .\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
    $Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
    0x007A81E8 - LabVIEW <unknown> + 0
    0x007A7BDB - LabVIEW <unknown> + 0
    0x00829D74 - LabVIEW <unknown> + 0
    0x008546CD - LabVIEW <unknown> + 0
    0x00C054E6 - LabVIEW <unknown> + 0
    0x0081B9C8 - LabVIEW <unknown> + 0
    0x0081EB9A - LabVIEW <unknown> + 0
    0x0084D9D4 - LabVIEW <unknown> + 0
    0x00854663 - LabVIEW <unknown> + 0
    0x00C054E6 - LabVIEW <unknown> + 0
    0x0085F7A1 - LabVIEW <unknown> + 0
    0x00BBACDD - LabVIEW <unknown> + 0
    0x00C06A2F - LabVIEW <unknown> + 0
    0x0085AA46 - LabVIEW <unknown> + 0
    0x00C06A2F - LabVIEW <unknown> + 0
    I observed the title bar after making changes to the properties.  I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes".  Saving was also much slower than usual.  I suspect, the program never got to placing the star before saving occurred.  However, I am noting everything.
    After creating the cursors, saving was and is normal, and the program runs well..   I have run tests without problems.
    Does anyone have a clue at what causes this?   Has anyone seen this before?
    Thanks,
    RayR

    Hi Donovan,
    I can't remember seeing this elsewhere.  When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps. 
    I will let you know if I see this in the new vi.
    Thanks!
    RayR

  • "The selected cells are read-only" error on Custom Field when trying to insert in Datasheet mode

    I have a custom field that works completely fine. Yesterday our QA team found out that when trying to insert in Datasheet format, the error "The selected cells are read-only" was thrown. Any ideas? I tried passing the following property to my fldtypes_field.xml file:
        <Field Name="ReadOnly">FALSE</Field>
    No luck.Victor Palma

    Unfortunately it did not work. I also developed the code and access the field and checked its property called "ReadOnlyField"  which is already set to false.
    Below is the xml that i am using. Can you please share the xml that you had used?
    <?xml version="1.0" encoding="utf-8"?>
    <FieldTypes>
      <FieldType>
        <Field Name="TypeName">MyCustomField</Field>
        <Field Name="ParentType">Text</Field>
        <Field Name="TypeDisplayName"> My Custom Field</Field>
        <Field Name="TypeShortDescription"> My Custom Field</Field>
        <Field Name="AllowBaseTypeRendering">True</Field>
        <Field Name="ReadOnlyField">False</Field>
        <Field Name="UserCreatable">TRUE</Field>
        <Field Name="ShowInListCreate">TRUE</Field>
        <Field Name="ShowInSurveyCreate">TRUE</Field>
        <Field Name="ShowInDocumentLibraryCreate">TRUE</Field>
        <Field Name="ShowInColumnTemplateCreate">TRUE</Field>
        <Field Name="FieldTypeClass">My Assembly Information goes here</Field>
      </FieldType>
    </FieldTypes>

  • I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

    I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

    Do you mean trying to purchase an iPhoto book?  Try rebooting and ordering again.  If that fails Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
    OT

  • Why does this come up when trying to insert a fluid div tag

    Can someone tell me please   why i get this when trying to insert a fluid div tag on my  page  thanks in advance mark  @charset "utf-8"; /* Simple fluid media Note: Fluid media requires that you remove the media's height and width attributes from the HTML http://www.alistapart.com/articles/fluid-images/ */ img, object, embed, video { max-width: 100%; } /* IE 6 does not support max-width so default to width 100% */ .ie6 img { width:100%; } /* Dreamweaver Fluid Grid Properties ---------------------------------- dw-num-cols-mobile:    5; dw-num-cols-tablet:    12; dw-num-cols-desktop:    20; dw-gutter-percentage:    15; Inspiration from "Responsive Web Design" by Ethan Marcotte http://www.alistapart.com/articles/responsive-web-design and Golden Grid System by Joni Korpi http://goldengridsystem.com/ */ /* Mobile Layout: 480px and below. */ .gridContainer { margin-left: auto; margin-right: auto; width: 97.3913%; padding-left: 1.3043%; padding-right: 1.3043%; } #LayoutDiv1 { clear: both; float: left; margin-left: 0; width: 100%; display: block; } #LayoutDiv2 { clear: both; float: left; margin-left: 0; width: 100%; display: block; } /* Tablet Layout: 481px to 768px. Inherits styles from: Mobile Layout. */ @media only screen and (min-width: 481px) { .gridContainer { width: 98.913%; padding-left: 0.5434%; padding-right: 0.5434%; } #LayoutDiv1 { clear: both; float: left; margin-left: 0; width: 100%; display: block; } #LayoutDiv2 { clear: both; float: left; margin-left: 0; width: 100%; display: block; } } /* Desktop Layout: 769px to a max of 1232px. Inherits styles from: Mobile Layout and Tablet Layout. */ @media only screen and (min-width: 769px) { .gridContainer { width: 99.3478%; max-width: 1232px; padding-left: 0.326%; padding-right: 0.326%; margin: auto; } #LayoutDiv1 { clear: both; float: left; margin-left: 0; width: 100%; display: block; } #LayoutDiv2 { clear: both; float: left; margin-left: 0; width: 100%; display: block; } }

    Firefox the web browser (from mozilla.org) nor Mozilla will NOT send any form or viruses, malware or toolbars into Firefox as it would hurt Mozilla far too much for any little gain.
    You seem to have the current Release Firefox 30.0 so there should be no more updates until Firefox 31.0 unless a chemspill update (30.0.1) was warranted in meantime for security and or stability fixes.
    So you are considering filing a lawasuit for Firefox prompting you for a Firefox update?.
    There are other reasons for connections like say looking updates for any Extensions and Themes you have installed, updates to a blocklist for Extensions and other safe things like mentioned at http://kb.mozillazine.org/Connections_established_on_startup_-_Firefox

  • PowerPoint 2010 Hangs when trying to insert audio file

    I am trying to insert audio into a PowerPoint slide program.  I have done this quite often with previous versions of PowerPoint on a Dell computer, so I don't think it is user error - although I am open to the possibility - anything to get this fixed!
    Details:
    Lenovo T520 4239CTO, Bios: 8AET52WW, Win 7 Prof 64-bit, Microsoft Office Prof 2010, PowerPoint 2010 32-bit version 14.0.6112.5000.
    When I try to insert an audio file (MP3) I see a progress bar at the bottom (PowerPoint is inserting media) but it never progresses, and I also see a pop-up frame with this msg: "Inserting media. To cancel press the ESC key."  The system hangs - I must use the Control-alt-delete to get the task manager in order to stop the application. 
    I have tried turing off all Norton Internet Security - no difference.
    All recommended and most optional updates have been done from Lenovo and Microsoft, using their update service.
    I suspect that even though I can't find out what is causing the hang, that it might be related to security software.  The music files were downloaded from Amazon, they are MP3 format, and should theoretically be okay in a PowerPoint slide show.
    I would be most grateful for any help resolving this issue, since PowerPoint is basically useless to me unless I can insert various media files. 
    Solved!
    Go to Solution.

    When trying to insert the Win 7 sample music the same thing happens:
    Here is event log details:
    Log Name:      Application Source:        Windows Error Reporting Date:          12/12/2011 3:09:55 PM Event ID:      1001 Task Category: None Level:         Information Keywords:      Classic User:          N/A Computer:      Arleen-THINK Description: Fault bucket 2610993906, type 5 Event Name: Office12AssertTimer Response: Not available Cab Id: 0
    Problem signature: P1: p1ml P2: 14.0.6029.0 P3: 3 P4: 512 P5: P6: P7: P8: P9: P10:
    Attached files: C:\Users\Arleen\AppData\Local\Temp\powerpnt.exe.p1​ml512.dmp C:\Users\Arleen\AppData\Local\Temp\powerpnt.exe.p1​ml512.cvr
    These files may be available here: C:\Users\Arleen\AppData\Local\Microsoft\Windows\WE​R\ReportArchive\NonCritical_p1ml_2e33eca65bd39977a​7b43b27361ac1362d71d0_19d1870a
    Analysis symbol: Rechecking for solution: 0 Report Id: 658d6d2f-2516-11e1-8a82-f0def1703a71 Report Status: 0 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/ev​ent">   <System>     <Provider Name="Windows Error Reporting" />     <EventID Qualifiers="0">1001</EventID>     <Level>4</Level>     <Task>0</Task>     <Keywords>0x80000000000000</Keywords>     <TimeCreated SystemTime="2011-12-12T23:09:55.000000000Z" />     <EventRecordID>14899</EventRecordID>     <Channel>Application</Channel>     <Computer>Arleen-THINK</Computer>     <Security />   </System>   <EventData>     <Data>2610993906</Data>     <Data>5</Data>     <Data>Office12AssertTimer</Data>     <Data>Not available</Data>     <Data>0</Data>     <Data>p1ml</Data>     <Data>14.0.6029.0</Data>     <Data>3</Data>     <Data>512</Data>     <Data>     </Data>     <Data>     </Data>     <Data>     </Data>     <Data>     </Data>     <Data>     </Data>     <Data>     </Data>     <Data> C:\Users\Arleen\AppData\Local\Temp\powerpnt.exe.p1​ml512.dmp C:\Users\Arleen\AppData\Local\Temp\powerpnt.exe.p1​ml512.cvr</Data>     <Data>C:\Users\Arleen\AppData\Local\Microsoft\Wind​ows\WER\ReportArchive\NonCritical_p1ml_2e33eca65bd​39977a7b43b27361ac1362d71d0_19d1870a</Data>     <Data>     </Data>     <Data>0</Data>     <Data>658d6d2f-2516-11e1-8a82-f0def1703a71</Data>     <Data>0</Data>   </EventData> </Event>
    Here is error report in Windows WER file:
    Version=1 EventType=Office12AssertTimer EventTime=129682049931131104 Consent=1 UploadTime=129682049931651134 ReportIdentifier=658d6d2f-2516-11e1-8a82-f0def1703​a71 WOW64=1 Response.BucketId=2610993906 Response.BucketTable=5 Response.type=4 Sig[0].Name=Problem Signature 01 Sig[0].Value=p1ml Sig[1].Name=Problem Signature 02 Sig[1].Value=14.0.6029.0 Sig[2].Name=Problem Signature 03 Sig[2].Value=3 Sig[3].Name=Problem Signature 04 Sig[3].Value=512 DynamicSig[1].Name=OS Version DynamicSig[1].Value=6.1.7601.2.1.0.256.48 DynamicSig[2].Name=Locale ID DynamicSig[2].Value=1033 UI[2]=C:\Program Files (x86)\Common Files\Microsoft Shared\office14\mso.dll Sec[0].Key=LCID Sec[0].Value=1033 Sec[1].Key=skulcid Sec[1].Value=1033 State[0].Key=Transport.DoneStage1 State[0].Value=1 FriendlyEventName=Stopped responding temporarily ConsentKey=Office12AssertTimer AppName=Microsoft PowerPoint AppPath=C:\Windows\SysWOW64\DWWIN.EXE ReportDescription=Microsoft PowerPoint had an unexpected error.  It was not critical so you were not interrupted when the problem occurred.

  • When trying to run any page on jdev 9.0.3.5 the jdev close

    when trying to run any page on jdev 9.0.3.5 the jdev close immidiatly and an empty log file is created i am using ie 8

    Hi,
    Check whether all the relevant services are up. If the problem still persist then there might be some issue with your JDeveloper.
    Regards,
    Gyan

  • When trying to export a pages document, it say error while printing....

    When trying to export a pages document, it says 'error while printing' when I want to save as PDF. I used to be able to do it but for some random reason it won't let me anymore. Even when the printer is not plugged in or turned on it says it. Is there a setting I can change? Does anyone know how to fix as i can't email any documents and I don't know what else to do. Please help its driving me crazy.....
    imac Intel-core duo   Mac OS X (10.4.8)  

    thank you, I can't print or save any old pages documents. I will create a new one and see if that helps. I have tried from the print dialog but it says the same thing. I will try something in another application. Could it have been when I updated pages? I only recently got broadband so did a heap of updates that were a bit overdue.

  • FireFox keep saying "unexpected error" when trying to print web pages.

    FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
    Please email me on what to do to get FireFox to work.
    I don't see anything in the FAQ that might help me.

    Hi,
    Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
    Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
    [http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

  • I get scrip error when trying to print web pages.

    I get a scrip error message when trying to print web pages and it will not print.

    FreddieP,
    You may want to download and run the HP Print and Scan Doctor. It helps diagnose and resolve printing issues. You can click on the link below to go right to it.
    Let us know if this works for your issue or not.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-106151-2&cc=us&dlc=en&lc=en...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • PCManFM Segmentation fault when trying to open two windows

    Hi
    It seems to be a bug, but I don't know if it's Arch, or upstream related, so first of all I will post here.
    What happens: When trying to open two different windows of the file manager PCManFM, it crashes systematically.
    How to reproduce: Open an terminal, type "pcmanfm"; pcmanfm is now open. Open another terminal, or another tab, type "pcmanfm"; pcmanfm is now closed. Go back to the first term, and you'll see "Segmentation fault"

    ozar wrote:While PCManFM is broken and rather annoying, note that you can open new tabs and windows from within the PCManFM window that already have open.
    Yep, I'm using this function since I noticed that bug but it'll be cool if this problem could be fixed in the near future ^^

  • InDesign crashes when trying to insert a new page!

    I use InDesign CS6 on a PC Win7.
    Suddenly yesterday when I tried to insert pages in one of the chapters in a book I am working on (12 chapters, 260 pages)  the software crashed!
    I have tried 7 times more after that with different changes, like only open the chapter I want to insert pages in, restart the computer and so on.
    Every time I try there is a "pling"-sound and It still crashes.
    What to do?

    Unfortunately there are lots of different things that can cause crashing behavior.
    Here is a list of things you could try:
    Check that you have the latest version of InDesign CS6 installed. Help > About InDesign (should be 8.0.2) - Adobe - InDesign : For Windows : Adobe InDesign CS6 8.0.2 update - All Languages
    Save the document as an InDesign IDML file, and reopen that IDML file in InDesign, then save it as an InDesign file again.
    Create a copy of the InDesign document and try opening that and adding a new page.
    In the open InDesign document before adding a page: Edit > Preferences > Type, deselect the Smart Text Reflow option.
    Delete cache files (see: InDesign preferences and support files locations page)
    Rename InDesign preferences file (or delete).
    Disable/Uninstall any third party plug-ins that are installed, and check that any third party plug-ins or extensions that are installed are compatible with the InDesign version used (depending on how they are installed you could do this from the Adobe Extension Manager application - see http://helpx.adobe.com/extension-manager.html).
    If all of this fails, you might need to try and isolate which object in your document is causing the crash. That's generally a time-consuming task, but hopefully one or some of the above combined will provide you with a fix.
    Cari

Maybe you are looking for

  • Adobe Interactive Form in Web Dynpro ABAP

    Hi all. I want to create an web dynpro application in ABAP using an Adobe Interactive Form. Can anybody share the document regarding this or any articles. Thanks & Regards Sagar Ingalwar

  • Problem with a patch solution

    Hi. I have a problem. when made patch of the solution. I was to make change in a web service and save and active. When i tried make assemble and download customer/specific solution the changes not work because i don't see some fields I added in the w

  • Does not copy the text

    Does not copy the text Please help me

  • Lightroom mobile in teacher plan

    According to Adobe it is included: Adobe Lightroom mobile – FAQ hereby a screenshot as well: why does it expire????? It is also not logical: you have photoshop and lightroom with the CC plan and the only option is to buy photoshop again with lightroo

  • How do I start using photoshop elements 10?

    I've uploaded from CD1 onto a windows 7 32bit computer but its only opening up as adobe premiere elements 10 and when I enter the serial no. it won't work. But I don't want to remove it and try again encase it won't let me reload it as I did already