IPhoto not working after installing Yosemite

After installing Yosemite the iPhoto icon on the dock has a circle/line symbol superimposed.  Get a message saying iPhoto needs to be updated, but when I try to update I get "Update unavailable for this Apple ID."  (I have used my current Apple ID at least since 2011, and have used it to update iPhoto previously.)

Right, App Store Support solved my problem.(iPhoto & iMovie were packaged with my iMac when I bought it.  Upgrading from Mountain Lion to Yosemite wiped that out, and these apps did not show up in my purchased list.  This would not have happened if Maverick had been installed prior to Yosemite.)

Similar Messages

  • Illustrator CC 2014 open and place commands not working after installing Yosemite

    How can I get Illustrator Open and Place commands to work after installing Yosemite?

    Hello,
    I also have the same problem, after 5 minutes I can't open or place anything in illustrator. I have this problem also in photoshop cc 2014. This started after installing Yosemite.
    Tried to reinstall but nothing helps.
    Today after updating creative cloud application it is even worse: illustrator is not opening anything: not even a new file. So I reinstalled... and I can open again for 5 minutes. But then it crashed while saving. Now I can't open illustrator at all...so nothing left to do then reinstalling again I suppose?

  • ICal Availability Panel Not Working After Installing Yosemite

    The availability panel for my corporate calendar no longer works after installing Yosemite.  I get a message that says "This calendar does not support availability."  This was working before I installed Yosemite.  Is there a configuration I need to change? 

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • IMessage not working after installing Yosemite

    When trying to log into iMessage after installing Yosemite I get this message "Your Apple ID "[email protected] can't be used to set up iMessage at this time."  It works fine on my iPhone and iPad.  Please help.

    about message http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755
    troubleshooting activation http://support.apple.com/kb/TS4268

  • Iphoto does not work after instaling yosemite

    I installed Yosemite, everything works fine, but iphoto keeps on crashing en does not load my photo's.

    As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?

  • Vuze not working after installing Yosemite

    I did an upgrade from Mountain Lion to yosemite today after months of putting it off.  Everything went great, mail is working etc and all looking good.  Except Vuze - it will not open at all.  i kept getting a message to install the latest Java, which I did and still not working.  I googled the problem and lots of people talking about using a different installer and providing the link, so I did that one too.  At the end it said Vuze has been installed successfully.  But when i click on the icon at the bottom of my screen it still gives me the error message 'To open Fuze you need to install the legacy Java SE 6 runtime'.  Then when i click More info, I'm back to where i started.  Please help - and I want to be able to save my library of course too.  All my files are on an external hard drive and I run time machine regularly. 
    I'm not very technically savvy, so any help and advice would be much appreciated. Please help me get my Vuze working again.  Thank you.

    Right, App Store Support solved my problem.(iPhoto & iMovie were packaged with my iMac when I bought it.  Upgrading from Mountain Lion to Yosemite wiped that out, and these apps did not show up in my purchased list.  This would not have happened if Maverick had been installed prior to Yosemite.)

  • Final Cut Pro X 10.0.9 not working after installing Yosemite

    Final Cut Pro X 10.0.9 is not working with Yosemite I installed today, what do I do?

    UUpdate your software. Only 10.1.3 or 10.1.4 work with Yosemite. Significant changes since your version.

  • Why does my mail not work after installing Yosemite?

    I just installed Yosemite. Right after when I tried to open my mail, it right away wants to download all my mail. Then it fails in doing so and says to continue in order to launch Mail Import Assistant. Then I push Continue, and it then says; "Your mail has been damaged. To repair it, quit mail. Says mail will repair itself the next time I open mail. But then I tried to open mail and it goes back to the fail...vicious circle and getting nothing solved. Help!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Preview software not working after installing yosemite. need help

    I have to regularly use pdf files for university work but from the moment i have updated to Yosemite,  Preview software suddenly stops and prompts error opening and so i have to download other software or use different method to read but i don't want to install apps when i already have one. So please help me.

    Please reinstall Yosemite.
    Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Iphoto not working after installing snow leopard

    My hardrive crashed while I was living in South America so I got the authorized mac dealership to put in a new one. Once I got back I was able to get all my photos and files from an external hardrive but I realized that my computer software was still 10.5.8. So I put in the Snow Leopard disk that I had bought because I realized that when they put in a new hardrive they didn't install Snow Leopard. After I installed Snow Leopard my iphoto now says "Caution The iPhoto Library folder is locked, on a locked disk, or you do not have permission to make changes to it." How do I fix this? I called Mac and because I bought the computer in 2007 I do not have any applecare so that will cost me $60 and the mac authorized dealership told me to call them or buy the new iLife in hopes that the problem will be fixed.

    See if one of the fixes in this topic helps: iPhoto becomes locked volume: Apple Support Communities
    OT

  • IPhoto not working since installing Yosemite

    I have a MacBook Pro: (Late 2011, 2.8GHz, Intel Core i7, 4GB memory)
    iPhoto version 9.6 (910.29)
    I have just updated to Yosemite and also installed the update for iPhoto.  But, every time I open iPhoto it hangs for a minute then crashes. It gives me a message "iPhoto quit unexpectedly".
    Can anyone please help with this?  Thank you.

    If you've run the upgrader and you are sure you have the latest version of iPhoto, I can only suggest you trash iPhoto and download it again.

  • Hp Laserjet 1012 not working after installing Yosemite

    After updating to OSX Yosemite, my laserjet 1012 printer no longer works. I've tried downloading the new hp update in the app store multiple times after removing the printer and previous drivers with no luck.
    My computer is recognizing the printer, and when i try to print something, the page comes out with "Unsupported Personality: PCL" at the top.
    Does anyone have a solution to this problem that works? I've already spent a few hours trying suggestions from other forums.

    Hi @challdev,
    Welcome to the HP Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Laserjet 1012 is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps! 
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Finder does not work after installing Yosemite

    I loaded Yosemite and now my Finder will not load.  When I click on the finder icon I get a message Finder could not open.  I looked at what is currently on several boards and tried most of the suggestions including reinstalling Yosemite without success.  There is a black dot next to the Finder icon which blinks. I have an I MAC with 8 GB RAM and 2.7 GHz Intel Core i5.  Help would be appreciated.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Track pad does not work after installing yosemite on brand new 13" macbook retina

    how to fix or revert hack to maverick. yosemite takes long time to load on startup, programs take longer to open and operate in choppy fashion. Im abot five minutes away from returning this mac to the storefor a refund.

    If you have any third party trackpad software, you should remove it.  Then check your Trackpad and Mouse settings in System Preferences and the Bluetooth setup options as well.  e.g..

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Windows Integrated Authentication on an ABAP data source

    Dear Experts, I have to implement Windows Integrated Authentication in my portal. By using Kerberos & SPNEGO, we can implement very easily if portal user id & windows (ADS) user id is same. But my scenario is windows id & portal id is different & dat

  • Data Block

    Hi,As we all know data block is a combination of the sparse Dimension. IF i make a level 1 member of a sparse dimenison as a Dynamic Calc. Then i wanted to know how essbase will create a data block for that block. If if we perform calculation on it t

  • Remove photo in email

    Hi Macsperts, My wife set up her iMac G.5  2.4 intel duo core and hates the little photo of her that goes out on her emails. How can she, or I,  change it? the puter is on OS 10.5.8 w/Mail 3.6. cheers! D

  • Sun Studio sessions @ SD West (join us!)

    Howdy, For folks who are attending SD Expo in Santa Clara, CA this week or who are in the area, the Sun Studio engineering team is holding a few talks, which are available to both conference attendees as well as those not registered (free session) ht

  • Converting office to Mac; iPad thin client

    Apologies if this post identifies me as a non-techie; just hoping for generic feedback and guidance. First question - Currently have a Macbook Air I use for business and personal use and am also using an iPad more and more to my MBA's displeasure. I'