Iphoto not working with upgrade and updated after Yosemite update

We updated to Yosemite last night and this morning I found I can not open my iPhoto. We had a very old version that cost to update so I decided to wait, well when I saw there was a free update I did that, then it said To open your library with this version of iPhoto, it first needs to be prepared. Now when I try to open it it keeps telling me to do the prepared upgrader and I already did, so it only gives me the option to quit or learn more which is where you down load it.

All fixed thanks to the apple support people. It was very hard and many many different ways to get it resolved.

Similar Messages

Isight not working with skype and tokbox after snow leopard upgrade

Recently, I upgraded from Tiger to Snow Leopard. After the upgrade, I found that my built-in iSight camera wasn't recognized on TokBox. On Skype, it said that the iSight camera was in use by another application (however no other applications were running). The iSight is working with iChat, so I don't know what is wrong... everything was fine when I was using Tiger!

hellokitty650 wrote:
Okay, so I restarted my computer and that didn't work.
Then, I went through the suggestions from the link you posted. I found that the iSight works in iChat and Photobooth; however, it does not work in iMovie HD (exactly the same in both user accounts on my computer). Just like before, the iSight is "in use by another application" in Skype on both user accounts.
I reset the SMC, but it didn't seem to help anything. Everything was acting the same as before I reset it.
I also noticed that my iTunes and my iMovie won't open; they both quit unexpectedly every time I try to open them. This happens in both user accounts as well.
Okay, so it will be simplest to work your issues in steps. We will start with iMovie.
Use your Mac's Disk Utility to repair permissions. Then reinstall iMovie HD 6. Repair permissions again after the installer finishes.
If the version of iMovie HD 6 in your iLife '06 DVD is not "6.0.3", download and install the update:
http://support.apple.com/kb/DL319
If you need to do this update, repair permissions again after the update is finished.
Test the reinstalled iMovie HD 6 to see if it works in more than one user account and post back the results.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Polarioid pogo printer not working with ipad and iphone

And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo. Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind. This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
I come from a photograpic background. I got the Pogo as soon as it came out. I quite literally was on Polaroid's website every day checking to see when I could order it. Having "instant" sticker prints is wonderful at family picnics with all the kids. While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released. So I took that as the sign that it was probably never going to happen. (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me. But, yes, it would be nice.)
I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints. Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340. But it's still Bluetooth only. So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon. IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing. But considering Polaroid's financial issues, I'm not holding my breath

HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

Check with your carrier or telephone service provider. Not all carriers provide this service.

My 3G I Phone Not Working With My SIM Card After I Updated my phone

my 3g iphone now ner not working with my sim card aftet i updated my iphone

Was your phone originally locked to a different carrier?

My N73 not working with ovi or pcsuite after i upd...

My N73 not connecting with my windows vista after an updated my old software with the nokia software update. i have tried resetting mu phone and unistalling the pc suite and ovi and installing them back but no use... i hav no idea what to do. the mass storage option works fine but the computer just dont recognosie the phone when in pc suite mode... i am using windows vista home basic.....before the update the applications were working fine .....
Solved!
Go to Solution.

Hi, Nokia N73 is compatible with Nokia Ovi Suite. I would recommend following:
- uninstall all existing Nokia PC SW (Nokia PC Suite, Nokia Connectivity Cable Drivers, Nokia Ovi Suite, Nokia Software Updater) from your PC
- Check, that you have enough free disk space and free memory in your PC. Error message shown in your screenshot seems to be related to Windows operating system problem, not having enough free resources to complete the installation of drivers needed for your device
- Reboot your PC
- Download Nokia Ovi Suite from our web pages
- Install Nokia Ovi Suite
- Start Nokia Ovi Suite and connect your device using USB cable to your PC
- If that doesn't help, try connecting your device using Bluetooth to your PC
Cheers, Samuli

Smart Talk not working with Bluetooth since update

I have been using Smart Talk for many months now on my iPhone. I have a bluetooth headset which I generally use.
This has worked fine (with the exception that when I get an incomming call it disconnects the bluetooth from the Smart Talk call).
But now, since installing version 1.28.0, Smart Talk is not working with my bluetooth headset at all. When I first make a call the headset is connected - I hear ringback tone. But as soon as the call is answered, the headset disconnects and the call is transferred to the iPhone itself. And the Smart Talk app does not give me any options to select the "audio source" (as it does if I make an ordinary mobile call).
As I almost exclusively use the headset, this latest update has made Smart Talk unusable for me.
Is there anyway I can get back to the previous version?

I worked out the problem... I'm using iPhone 4S iOS7
- Start BT Smart Talk from in car
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
- kill and restart BT Smart talk
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
3rd call, always no bluetooth.
It seems there is no way to select the output like with all other bluetooth devices too

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

VM Manager's Launch Console not working with OpenJDK and IcedTea

Fedora 15
java-1.6.0-openjdk-1.6.0.0-59.1.10.3.fc15.x86_64
icedtea-web-1.0.4-1.fc15.x86_64
ICEDTEA-WEB NOTES
Invalid XML
An error like
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1203)
indicates that the JNLP file is not valid XML. The error happens because netx uses an XML parser to parse the JNLP file. Other JNLP client implementations may use more lenient parsers and may or may not work with the given JNLP file. Errors caused by malformed JNLP files can often lead to subtle bugs, so it is probably best to fix the JNLP file itself. A tool like xmlproc_parse might be able to pinpoint the error.
XMLPROC_PARSE OUTPUT
$ xmlproc_parse ovm_rasproxy-ws.jnlp
xmlproc version 0.70
Parsing 'ovm_rasproxy-ws.jnlp'
E:ovm_rasproxy-ws.jnlp:3:89: Undeclared entity 'machineName'
E:ovm_rasproxy-ws.jnlp:3:89: ';' expected
Parse complete, 2 error(s) and 0 warning(s)
JAVAWS OUTPUT
$ javaws ovm_rasproxy-ws.jnlp
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
JAVAWS -VERBOSE OUTPUT
$ javaws -verbose ovm_rasproxy-ws.jnlp
No User level deployment.properties found.
Starting security dialog thread
JNLP file location: ovm_rasproxy-ws.jnlp
Status: CONNECTED DOWNLOADED STARTED +(CONNECTED DOWNLOADED STARTED) @ ./ovm_rasproxy-ws.jnlp
<?xml version="1.0" encoding="UTF-8"?>
line: 2 <jnlp spec="1.0+" codebase="http://192.168.4.21:7001/ovm/rasproxy/"
line: 3 href="ovm_rasproxy-ws.jnlp?vmachineId=0004fb0000060000046ffdb8a331ce21&machineName=mytestmachine">
line: 4 <information>
line: 5 <title>Oracle VM Remote Access Service</title>
line: 6 <vendor>Oracle</vendor>
line: 7 <homepage>http://support.oracle.com/</homepage>
line: 8 </information>
line: 9 <resources>
line: 10
line: 11 <j2se version="1.5+"
line: 12 href="http://java.sun.com/products/autodl/j2se" />
line: 13 <jar href="ovm_rasproxy-signed.jar" main="true" />
line: 14 <jar href="OvmCoreApi.jar" />
line: 15 <jar href="MgmtUtil.jar" />
line: 16 <jar href="Odof.jar" />
line: 17 <jar href="commons-logging-1.1.1.jar" />
line: 18 </resources>
line: 19
line: 20
line: 21 <application-desc main-class="com.oracle.ovm.ras.proxy.RasProxyApplet">
line: 22 <argument>-server</argument>
line: 23 <argument>192.168.4.21</argument>
line: 24 <argument>-service</argument>
line: 25 <argument>003600010004fb0000060000046ffdb8a331ce21</argument>
line: 26
line: 27 </application-desc>
line: 28 <security>
line: 29      <all-permissions/>
line: 30 </security>
line: 31 <update check="background"/>
line: 32 </jnlp>               net.sourceforge.jnlp.ParseException: Invalid XML document syntax.
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
     at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
Caused by: net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
     at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
     at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
     at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
     at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
     at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
     ... 8 more
Caused by:
net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
     at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
     at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
     at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
     at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
     at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
     at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)

Both realvnc 4.1.3 and tigervnc 1.1.0.1 work on the Linux side.
I was able to get the console to work by wiping the contents of the directory I created at the beginning of this exercise and then copying in a fresh OVM 3.0.2 created ovm_rasproxy-ws.jnlp file.
[gordon@ufo Downloads]$ rm /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/*
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
     at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected java.io.IOException: /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ovm_rasproxy-ws.jnlp (No such file or directory) at net.sourceforge.jnlp.JNLPFile.openURL(JNLPFile.java:255)
[gordon@ufo Downloads]$ cp ovm_rasproxy-ws.jnlp /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
     at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.tools.JarSigner.checkTrustedCerts(JarSigner.java:414)
     at net.sourceforge.jnlp.tools.JarSigner.verifyJars(JarSigner.java:269)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.verifyJars(JNLPClassLoader.java:946)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.initializeResources(JNLPClassLoader.java:422)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:169)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:283)
     at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:650)
     at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:436)
     at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:830)
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.4.16
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000281734f86e6aab47
Oct 4, 2011 4:13:42 PM com.oracle.ovm.ras.proxy.external.VncViewerLauncherFactory getVncViewerLauncher
INFO: Os is : linux
Oct 4, 2011 4:13:53 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
The console starts and all is well with the world.
This is obviously not how one would want to start a console by downloading the .jnlp file and running it on the command line so I am now going to remove the /home/gordon/.icedtea/cache/http/* and see what happens.
First, let me say that nothing happened. It did not work. I did confirm that it creates the directory structure again /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ but there is only one file in the directory.
[gordon@ufo rasproxy]$ cat ovm_rasproxy-ws.jnlp.info
#automatically generated - do not edit
#Tue Oct 04 16:43:29 EDT 2011
last-modified=0
last-updated=1317761009801
content-length=883
If I save that ovm_rasproxy-ws.jnlp file instead of opening it and copy it to the /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ directory the console will now start successfully with one minor drawback - it will only launch that one VM based on the .jnlp file that I downloaded.
Help?

NB200 Windows 7 Fn key not working with ESC and F1 to F8 keys

I recently bought a Toshiba NB200-136 and everything worked fine.
Flash cards on top/bottom of the screen work with Space, ESC and F1 to F8 keys, the rest of function buttons work without showing the cards. Lately the cards stopped showing and I cannot use the Fn + Space, ESC, F1-F8 keys (there's just no reaction), though the rest of buttons work with Fn and the LED is always lit when the Fn is pressed.
I reset Flash Cards, checked and changed their settings few times and they work only if I choose 'Allow the mouse to bring up the cards' option. Even then they don't appear when I press Fn and the functions work only when I click one of the cards.
The problem appeared after (though I'm not sure if immediately) such situation:
I clicked Start -> Shut down and closed the lid. When I opened it the next morning I saw an empty list of programs that wouldn't shut down (it happens quite often, but it's off top). I clicked 'Cancel' or 'Force shut down' but it didn't work so I pressed the Power Button for 5 secs to turn the computer off. I noticed the Fn problem after turning it on and it didn't disappear after resets.
I think the problem appeared before but disappeared after reset so I ignored it.
I'll be thankful for your help.

Any time that you force Windows to stop instead of letting it shut down normally (sometimes you have to shut it off), you may have lost clusters of data that interfere with the proper operation of Windows. So I suggest you start up and run scandisk and make sure you check the box for fixing problems. The other box doesn't need to be checked unless you suspect bad sectors on the hard drive and it takes a long time so I recommend only checking the one box for finding and fixing errors.
Let us know if this worked and the problem is fixed.
Good luck.

Xmldataset is not working with ie6 and ie7

xmldataset is working with all browsers (ie8, opera, safari
firefox) however it doesn't work with ie6 and ie7
according to me all things are correct,my works doesn't
appear ..
http://www.turkedergi.com

Hello
I am pretty sure they know about this issue and software companies must not hear what the people say. For me it is logic that they watch what happen on the software market and try to adapt own products as soon as possible.
This issue with IE8 is known and soon or later the updated version will be offered on download page but the question is: when?
I cannot understand why they wait so long time. OK, to fix some issue and testing procedure can take a days but IE8 is not on the market from yesterday.
Lets see how long it will be necessary for AuthenTec to fix this issue.

I messaging still not working with ios7.3 update

My I Messaging not working with IOS 7.3 update. I have an Ipad2.

I have turned I messaging on and off and I have reset network settings. Ugh

Iphoto not working with upgrade and updated after Yosemite update

Similar Messages

Maybe you are looking for