IPhoto to Flickr Authorization Error

Hello...
I am having the same issue that eriktiekstra had in a post from 2013.
I am currently using Mavericks 10.9.4 - and trying to add photos to my Flickr account directly from iPhoto. It always gets hung up when I try to authorize Flickr within iPhoto. This is the message I see.
And it always get's hung up when trying to authorize: I did what Old Toad suggested:
- found all those cache and support files for iPhoto - deleted them, restarted my computer - and still I cannot get iPhoto to get past the Setup/Authorization screen. I know the error message says to "please try again later" - but this has been happening for over a month now. Not sure 'later' will ever come.
Any help would be awesome!

This is a long shot but worth a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
     User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Similar Messages

  • IPhoto Flickr - Authorization error

    Hi!
    I started to use the Flickr upload solution (again) to make my pictures available online and have some kind of backup solution for my pictures. In the beginning no problem at all. Now, since a few days I get the error that iPhoto isn't authorized anymore to use the Flickr account anymore and that I have to authorize it again.
    I keep getting this error and I am not able to upload to my account anymore, even when I authorize iPhoto again in the Flickr settings. Sometimes the authorization process hangs in iPhoto making me having to restart iPhoto completely. iPhoto IS authorized in the Flickr settings.
    I hope someone has a solution for my problem because I chose just Flickr because it is quite easy to use in combination with iPhoto.
    Kind regards,
    Erik Tiekstra

    This is a long shot but worth a try:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • Authorization error while attaching document in ME22N

    Hi,
    Scenario 1: I attach a document in ME22N and then save it. Result: I get an authorization error.
    Error is: "You have no authorization for extensions (activity03)"
    Scenario 2: I just make a change (say in price) without attaching any document and then when i try to save it. Result: There is no authorization error.
    Message (output) type in both the cases is EDI.
    On further investigation, we found the authority-check abap statement which is responsible for throwing the error.
    authority-check           object authority_obj_edi_deftool
                id 'EDI_TCD'  field  authority_tcode_edi_deftool
                id 'ACTVT'    field  pi_activity
                id 'EDI_DOC'  DUMMY
                id 'EDI_CIM'  field  pi_cimtyp.
    This statement gets executed for both the scenarios and with the SAME variables but it throws error in case of scenario 1 only.
    Following are the values of the variables in BOTH cases:
    authority_obj_edi_deftool = S_IDOCEFT
    authority_tcode_edi_deftool = WE30
    pi_activity = 03
    pi_cimtyp = Z2ORDERS02
    Any help is appreciated.
    Regards,
    Chinmay

    Dear,
      Kindly contact your basis team. it will help you.
      Please give him SU53 screen short for his reference.
    Regards,
    Sandip

  • Authorization Error on Peoplesoft Login Page

    Hi, this is related to the previous project we are still working on.
    Invoking a Java Method from Peoplecode
    While we have found that our approach have been successful in Dev and Test Environments, once we migrated the changes to Production, it seem to have stoppped working. Our client wants to test the link from Test Environment and would Single Sign On to the Production environment. But we are getting this eror, Authorization Error -- Contact your Security Administrator on the Peoplesoft login page when the link is clicked from the Third Party website.
    The node setup for Dev, Test and Prod environments under Node Definitions are using PSFT_CR as the default local node and are all working when ping'ed. The defaut user that is used for allowing public access in the Web Profile are setup'ed just the same in all three environments, and application/web servers have been restarted as well.
    One thing we noticed is that the url of the third party website is http and the url for the PS prod is https. Could this be the one causing the error, or have we missed something on the setup.
    Again, we appreciate your insights regarding this.
    Edited by: Jeremy Leung on Jul 9, 2012 11:50 PM

    Hello,
    Have you tried the steps suggested by
    Imtiaz Hussain in the
    previous thread you queried ?
    Is the error the same that you were previously encountering ?
    Regards,
    Neelesh.

  • When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • Authorization error when exporting business system

    Hi ,
    I am on XI 7.0 spo9.I am trying to transport from dev to qa .
    I am able to easily export (login using xisuper ) Technical system.
    However while exporting Business system .when it gives me to download a file I get an authorization error .
    Kindly help

    Hi,
    Check XISUPER has the below roles in SU01.
    SAP_BC_AI_LANDSCAPE_DB_RFC
    SAP_SLD_ADMINISTRATOR
    SAP_SLD_CONFIGURATOR
    SAP_SLD_DEVELOPER
    SAP_SLD_ORGANIZER
    SAP_SLD_GUEST
    add the above roles for XISUPER and get the green color those roles using Tcode : PFCG.
      The above roles should be in green color.
    Regards,
    Venu.

  • Log SSP and Authorization Errors

    I asked for this on the feature request website
    "It seems that apex does not log SSP errors or Authorization errors, or if it does, they are no available in an apex view. For example, if a user changes the page number in the url to a page he is not authorized to see, an error page is dispalyed, telling him that he cannot see this page. As far as I can tell, this error is not logged in the apex views. Same goes for, when a user tries to change an id in the url."
    My item was closed with the comments
    "The error messages are logged into the activity log if activity logging is enabled for your application. Have a look at the column ERROR_MESSAGE in the view APEX_WORKSPACE_ACTIVITY_LOG. "
    Well I tested it again.
    I went to a page and changed the item_id and I received the checksum violation message.
    I then did a select * FROM APEX_WORKSPACE_ACTIVITY_LOG and looked for the error message.
    There was no error message.
    Can someone else try this
    Gus

    Hi Gus,
    I just have setup another test at apex.oracle.com
    workspace: patricks_test
    user: guest
    pwd: 123456
    1) Run application 24683 and login as guest/123456
    2) If you click "Customers" you will get the authorization error
    3) If you click "Products" and then pick a product to navigate to page 6 and afterwards modify the value of P6_PRODUCT_ID you will get the checksum error
    4) In the Builder navigate to Administration -> Monitor Activity -> By Application -> 24683 and you will see the entries of APEX_WORKSPACE_ACTIVITY_LOG
    When you did the query on APEX_WORKSPACE_ACTIVITY_LOG, did you verify that your app is writing activity logs at all? And second, have you connected with the parsing user of your application?
    Regards
    Patrick
    Member of the APEX development team
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • No Authorization error in executing a planning sequence

    Hi,
    We are using BI 7.0 Integrated Planning.
    We have implemented Mark Bernaud's file upload solution. We have used a planning sequence that uploads the file and stores it in a cube. Using it, we are able to upload files without any problem when executing with a SAP User Id which has all the authorizations (the user id has SAP_ALL specified in its list of profiles). Now, we have a requirement where we need to execute the file upload using a user id which has limited authorizations. When we are trying to execute the file upload with the userid that has limited authorizations, we are getting the following authorization error.
    'You are not authorized to execute sequence PL_SEQ_FL_UPLOAD'
    where PL_SEQ_FL_UPLOAD is the name of planning sequence we are using. We have also included the authorization variable in the filters being used as suggested in one of the blogs but this didn't help.
    Could anyone please let us know the authorization objects to be added to the user id to enable access to this file upload.
    Many Thanks,
    Narendra.

    Thank you very much Diogo,
    The objects you suggested were already there. We have successfully traced the error by switching on the trace using ST01. We found the reason for the error to be that display authorization is not provided for S_RS_PLSQ whereas execute authorization is already present for that.
    Once again thanks Diogo.
    Many Thanks,
    Narendra

  • Authorization Error  while executing Workbooks,

    Dear ALL
    We have authorization in place where users are restricted to execute Workbooks PLANT wise.
    For this 0PLANT is kept authorization relevant.
    0PLANT__0COMP_CODE  is Navigational Attribute of 0PLANT also marked as authorization relevant.
    Till now all user were assigned the Analysis authorization A_PLNT_XX as  0PLANT = XX
    But suddenly now the users are getting authorization error of NOT BEING AUTHORIZED .,
    The error log is as shown below.
    Relevant Characteristics for Detailed Authorization Check  
    (Characteristics with Full Authorization Are Not Listed!)
      List of Effective Authorization-Relevant Characteristics for InfoProvider ZMMIMMP05:  
    0PLANT 
    0PLANT__0COMP_CODE 
    0TCAACTVT 
    Subselection (Technical SUBNR) 1  
    Supplementation of Selection for Aggregated Characteristics
      Check Added for Aggregation Authorization:     0PLANT__0COMP_CODE  
      Authorizations missing for aggregation (":")  
    Characteristic  1 
    0PLANT__0COMP_CODE    Empty   
    Entries marked with red do not have aggregation authorization
    You can find more information about this here 1140831
      The authorization check stops here as this selection is no longer needed  
      Message EYE007: You do not have sufficient authorization  
      No Sufficient Authorization for This Subselection (SUBNR)  
    Following CHANMIDs Are Affected:
    51 ( 0PLANT )
      Authorization Check Complete  
    Please let me know the reason for the same.
    Also How can  i track these  changes to avoid such errors
    Regards,
    Ajit

    Hi Ajit,
    The authorization log has been improved constantly and try to make it easy to understand.
    It says:
    Authorizations missing for aggregation (":")
    Characteristic 1
    0PLANT__0COMP_CODE Empty
    Entries marked with red do not have aggregation authorization
    You can find more information about this here 1140831
    So please click the "1140831" which is a hyperlink bringing you to OSS note 1140831.
    The note says:
    1140831  Colon authorization during query execution
    Part 1:  Description of the authorization check
    You require aggregation authorization ("colon authorization") to view
    the values of an authorization-relevant characteristic in aggregated
    form. What does this mean exactly?
    Example:
    The calendar year (0CALYEAR) characteristic is authorization-relevant
    and is contained in the InfoProvider that is in use. You defined a query
    as follows:
    1.  0CALYEAR is in the free characteristics (not in the drilldown)
        without any selections
    - or -
    2.  0CALYEAR does not exist in the query at all.
    In both cases, no 0CALYEAR values are displayed in the query. Also, the
    query is not restricted to any 0CALYEAR values. A colon is required for
    the authorization check in this situation.
    The note contains some more detailed explanation. You could read through it to understand the concept.
    Regards,
    Patricia

  • Authorization error  while regestring developer in SSCRkeys

    Hi All,
    iam trying to register developer in SSCR keys to generate acess key .
    iam getting  authorization error
    How to  Register SSCR keys  authorization.
    pls help me out ....
    solutons appreciated
    John

    Hi juan,
    iam getting Authorization Error!
    Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
    do i need to register for sscr authorization.
    solution appreciated
    Regards
    John

  • "Authorization error" while accessing Multiprovider in Analysis for excel tool

    Hi,
    We are using "Analysis for excel" 1.4 version. My users are executing all queries out of any MP with out any issue. But while accessing Multi Provider in "Analysis for excel" tool they are geeting "Authorization" error.  Any suggestions please.
    Thanks,
    Deepa.

    Hi Deepa,
    I'm facing the same problem, which basically is no issue but expected behaviour?!
    Reason: When allowing access on Multiproviders via queries you probably restrict the data selection with authorization variables, where users have to select characteristics they are allowed to see.
    In that way, you prevent that users can see data for which they are not authorized.
    Finally, if the direct selection via Multiprovider was allowed without any restriction, your whole authorization concept would be for the birds :-)
    In my case, I wanted to give users just an overview of the "last update dates" of several infocubes:
    =SAPGetSourceInfo("DS_1"; "DataSourceName")
    =SAPGetSourceInfo("DS_1"; "LastDataUpdate")
    (... we all know that Multis can display only the oldest load date of any of all Cubes below....)
    I even deleted the cross-tabs, and kept only the reference to the DS_x ... But still, when users try to refresh the data sources they are not even allowed to select pure technical Cube Information :-/
    Regards, Martin
    PS: If anyone else has a different idea as solution to my problem, just let me know :-)

  • No Authorization Error message while displaying plan data in the layout

    I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
    Can somebody please let me know if I am missing something?
    Thanks for your help.
    Latha

    Hi Latha,
    Run transaction RSSM, go to authorization check log, enter your user.  Try execute the BPS layout again, and get the error message.
    Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
    Hope this helps,
    Frank

  • BW Authorization Error documentation Question

    Hi,
    I have a question, may be you can help in this:
    Q: In BW Analyzer if we get the following authorization error for some reason:
    ->Authorization Check
    You do not have authorization for Add or Create
    There is a Details tab to see the authorization error details. I need to add documentation for the naming conventions the Users need to use so that it's easy for Users to see what is the reason for the error and what naming convention do they need to use to prevent the error.
    Right now, details tab shows "No Documentation Available". How can I add documentation here? Where do I add this documentation and how do I link it to the Authorization Error Message's Details tab?
    I tried running RSRTRACE to see which function modules/programs get called but that does not help. It gives me the following two function modules which are being called when I get the error message and when I click the details tab:
    RZX0_MESSAGES_GET
    RZX0_MESSAGE_H_GET
    and surprisingly when I try to look them up in SE37 they do not exist … What can be the reason for this?
    Is there a system transaction, like .. SM02, in BW where we can define or create authorization error message documentation for BEx Analyzer? How do I link it to the Authorization Error message?
    Your help or advise will be very much appreciated.
    Thank You,
    Regards,
    Mandeep Virk

    It can be done via SE91.
    Message Class is R9 and message number is 108
    We have to define the Long Text and save it under the RSZ class.
    It works for me now.
    Thanks,
    Mandeep

  • NO Authorization error when accessing Functional module RH_CUT_OBJECT

    Hi,
    I am getting NO AUTHORIZATIOn error when I am executing SE37-->FUNCTIONAL OBJECT-RH_CUT_OBJECT.
    I also checked SU53 screenshot which says AUTHORIZATION CHECK SUCCESSFUL and there are no errors or missing authorizations highlighted in SU53.
    I switched on the TRACE-ST01 then also the error is not captured.
    I would like to know WHY am I getting NO AUTHORIZATION error.
    I am already having access to T-CODE SE37, SE11, SE80, SMARTFORMS and authorization object S_DEVELOP.
    I need to know this ASAP on why I am getting NO AUTHORIZATION error when I am trying to access the FUNCTIONAL MODULE RH_CUT_OBJECT whereas I am having all the required authorization required for ABAP Developer including SE37.
    Is it something I need change at ABAP code level.
    Please advise ASAP.

    The reason is ..You do not have acess to see/acess the data this FM is trying to acess ...Debug the function module keep a breakpoint at The Raise statement see which authorization you do not have ....BTW this is my guess you are trying to demilit certain objects /infotypes using this FM and delimit basically makes that object non-usable in that system  .So it is quite evident that every one will not have authorization for that .Please post in detail that what is it that you are trying to achieve using this function module .....
    Also you can check with debugging  which authority object is being checked before raising the message and can ask security team to get that added to your profile ....
    Thanks,
    Anjaneya

  • Procurement Coordinator received Authorization Error when creating Bid Inv

    Hi All,
            In SRM I have an issue Please help me in solving this. Please see below
                  Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit.  Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators.  This problem does not happen for Commodity Managers

    Hi
    Please do the following steps.
    When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
    ALso pls check the foll:
    -->activate the services through SICF tcode.
    > Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
    >Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
    Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
    Could you please review again the following steps ?
    Did you check that ICM was working correctly (TA SMICM) ?
    1-Activate the necessary ICF services
    With transaction SICF and locate the
    services by path
    /sap/public/bc/its/mimes
    /sap/bc/gui/sap/its/webgui
    2- Publish the IAC Services
    With Transaction SE80 locate from
    the menu Utilities -> Settings ->
    Internet Transaction Server (Tab) ->
    Publish (Tab) and set “On Selected
    Site” = INTERNAL.
    3- Locate the Internet Services SYSTEM and WEBGUI.
    Publish these services with the Context
    Menu -> Publish -> Complete Service
    4- Browse to http://<server>:<icmport>/sap/bc/gui/
    sap/its/webgui/! and login to the
    webgui.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

Maybe you are looking for