Iphoto won't install on snow leopard

Have an iMac that was running Tiger that required a complete hard drive reformat. Upgraded to Snow Leopard and went to the App Store to purchase iLife (or iPhoto at the very least) and the minimum requirements are 10.7.4 ... I do not want to update past Snow Leopard. Any suggestions? Doesn't Apple have a previous version to purchase for 10.6.8??

Not on the App Store anymore.
You'll need to find an iLife 11 install disk. Try amazon or ebay.
Regards
TD

Similar Messages

  • Wiped my entire macbook drive and now snow leopard won't install over snow leopard server, HELP!

    I ordered, what I thought, was Snow Leopard a while ago because I was running Leopard and I wanted to get the app store so I could move onto Lion and then Mountain Lion. I ordered the disc over the phone and the woman sent me the Snow Leopard Server instead of just Snow Leopard, I didn't think much about it so I clean installed it and ran it on my unibody macbook for a while. I didn't see much use for the disc anymore seeing that everything was downloadable at this point, so I sold the disc on Ebay and carried on. The server edition started to slow my computer down due to all of its excess applications and what not, and I read online that Lion and Mountain Lion are also very slow on the old unibody Macbooks so I ordered a regular Snow Leopard disc, now available online, and tried to install it. My computer said Snow Leopard cannot be installed over Snow Leopard server so I went to disc utitlity and wiped my entire drive while the OS X Snow Leopard disc was running and trying to install. I went back to the install window and it still said OS X Snow leopard cannot be installed over Snow Leopard Server so I shut down my computer and tried to turn it back on and I all I got was a blinking folder with a question mark in it, what do I do????????
    P.S. All of my content is backed up on an external harddrive so I am all good with that.

    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting has finished quit DU and return to the installer. Complete the Snow Leopard installation.

  • IPhoto won't open since Snow Leopard upgrade

    Hi,
    Since upgrading to snow leopard iPhoto won't open, it just crashes instantly. I ahve tried reinstalling with no luck.
    Can anybody help with this?
    Thanks in advance,
    Dan.

    i just bought a new MBP 13'' 2.53 Ghz 4Gb Ram 250GB HD... i tried moving my iPhoto library from my powerbook g4 1.67 machine that was running 10.4.11 (via a Lacie external)
    once i moved this and opened iPhoto (on my new MBp running 10.6.1 - SNOW LEOPARD) it instantly asks me to upgrade the library (saying that the old library needs upgrading for this version), so i click upgrade, and then 2 seconds later it says that the library is corrupt and damaged and i must install from a back up...
    I deleted iPhoto then emptied trash after clearing up some space on the external, meaning i lost iPhoto applicaton - IDIOT I KNOW - so i download iPhoto 8.1 and the library upgrade and error / damaged library message appeared again...
    I have now, (as i type this right now) re-installed snow leopard from the snow leopard disk that came in the MBP box (i have had it like 2 weeks, thats it, it shipped with leopard and i am having to install SNOW LEOPARD, for the 2nd time) to get iPhoto back)... will this give me iPhoto back, or do i have to re-install from the LEOPARD OS disks that were sent in the MBP box, the OS that it shipped with?
    i am very annoyed that it seems that my iPhoto library from a 3.75year old machine cant be on my new machine unless i re-add each PBG4Tiger10.4.11 individual library folder thru the interface of iPhoto on my new machine... (if indeed it will ever open)...
    PLEASE HELP !

  • Itunes 9 won't install on Snow Leopard.

    Itunes 9 won't install on my Snow Leopard. It wont even try. The install screen freezes on "Choose Disk to install" screen and the eternal beachball attacks. I've tried 4 times now, with no success
    Current Itunes: 8.2.1 (6)

    I'm having similar issues. iTunes 9 hung during the install. When it launched, it hung on converting the library, but eventually did it. Took well over a half hour. Then it automatically tried to do a Genius update.
    Well, that also hung iTunes and almost an hour.
    I then plugged in my wife's 32 GB Touch. Again hung iTunes. Force Quit and re-launch, and it detects the iPod and prompts to update to 3.1.1. Halfway through the update I get a spinning beach ball.
    After that is done and I finally sync the **** touch, I update my Podcasts. Spinning beach ball and 15 minutes later, no updates.
    Then I turned SoundCheck on. Instant beach ball. It's been an hour and half and it hasn't even done 25% of my library yet. It moves along slowly, but there's a spinning beach ball throughout the whole process so far.
    I've rebooted between each spinning beach ball and force quit more times than I can count.

  • PSE 8 for Mac won't Install; running Snow Leopard 10.6.2

    Hi,
    When PSE 8 was released for the Mac, I bought a copy from Amazon.  I am running Snow Leopard 10.6.2 on two 24" iMacs and one MBP 15.3.  The Adobe installer would hang about three quarters through the installation.  I'm running PSE 6 for Mac without a problem.  I returned the software to Amazon without a problem.
    A month or two later I downloaded a trial version from Adobe's web site thinking perhaps the DVD I had gotten from Amazon was possibly defective.  Nope.  Same problem trying the trial version.  It just hung about three quarters through the install on all three machines.
    I'm running Photoshop Extended CS 3 with Snow Leopard and have no problems.
    What gives?
    Thanks,
    Linnie K

    Hi,
    I wouldn't know.  The first copy I bought from Amazon and returned.  The second one was downloaded from your web site as a trial and I removed all the bits and pieces after killing an hour with the installer.  I didn't think I could download the trial version a second time.
    I'm using a Mac with Snow Leopard 10.6.2.  My Photoshop Extended CSS3 and PSE 6 work just fine.  I'm afraid that if I deleted all you had suggested, I would have trouble reinstalling the two apps I just mentioned.  From what I've read on various forums,, Mac users (not all) are still having difficulty installing PSE 8.
    BTW, this is the only app I've had any problem installing on my system.  I deliberately waited for v. 10.6.2 to install the newer OS as there were earlier incompatibilities.
    Thanks,
    Linnie
    [email protected]
    www.youtube.com/user/LinnieK9
    Putting the fun in dysfunctional for more than half a century...

  • Help!  FCS2 Won't install on Snow Leopard?

    I installed Snow Leopard. Installation Goes fine until the very end. You stick in the last disc and it comes up and says installation failed. I really need this to work. Do I really have to downgrade to Leopard so My FCS2 will work.
    Thanks for any help.
    It's academic if that helps any.

    I'm having similar issues. iTunes 9 hung during the install. When it launched, it hung on converting the library, but eventually did it. Took well over a half hour. Then it automatically tried to do a Genius update.
    Well, that also hung iTunes and almost an hour.
    I then plugged in my wife's 32 GB Touch. Again hung iTunes. Force Quit and re-launch, and it detects the iPod and prompts to update to 3.1.1. Halfway through the update I get a spinning beach ball.
    After that is done and I finally sync the **** touch, I update my Podcasts. Spinning beach ball and 15 minutes later, no updates.
    Then I turned SoundCheck on. Instant beach ball. It's been an hour and half and it hasn't even done 25% of my library yet. It moves along slowly, but there's a spinning beach ball throughout the whole process so far.
    I've rebooted between each spinning beach ball and force quit more times than I can count.

  • Canon EOS Rebel XSi Software update won't install in Snow Leopard

    I tried to install an update to Canon's EOS Rebel XSi camera software using downloaded images from the Canon website. Image loads, but when I start the installer I receive the error message "Don't have enough privileges to install. Log in as administrator and try again." I am logged in as the administrator and have no issues loading other programs or program updates. I tried installing the same software from DVD with the same results. Any suggestions? Thanks.

    Sorry for the confusion. I'm new to the discussion thing and didn't update the entire profile from my last visit. I'm using a Mac Pro and am more concerned about not being able to install/update software because the program doesn't think I have admin privileges. I found the privilege thread in this section so that's where I posted the question.
    I know the Canon software works in Snow Leopard because it's running on my laptop.
    I'll try the Picasa software option you suggest.

  • Microsoft Office 2008 Won't Install On Snow Leopard

    So I installed Snow Leopard last night, and everything's been going smoothly; that is, until I needed to reinstall Microsoft Office 2008. I uninstalled it when it was buggy, as I figured it was a simple issue that could be fixed with a reinstall, but now it refuses to even install.
    I can get through the installer, up until the point where it tells me to select the components to install, and then when I click "Install"- nothing happens. Here's a video of exactly what's happening, to better diagnose the problem. (http://www.gynecologistcobra.net/misc/msinstallbug.html)Anyone care to help me figure out what's going on?
    When I put the disk back in to install Rosetta, I got through it, until the end where it asked me to install. When I click it, the button greys out, then just goes back to normal and nothing installs, just like above. I don't know what's going on.

    I can't. Whenever I click the lock to make changes in Accounts, nothing happens. Everything stays just like it was.

  • Installing iPhoto on a clean install of Snow Leopard

    I bought a new Mac and gave my dad my old Macbook Pro (15 inch Core 2 Duo, 2006). I was running Snow Leopard on the laptop but I wanted to clean it off before giving it to him. So, I inserted the Snow Leopard disc, restarted the computer, held down C, and ran disk utility and erased it. Then I did a clean install of Snow Leopard. I didn't realize that SL did not contain iLife (I know, silly me). I would rather not reinstall Tiger, Leopard, and then Snow Leopard all over again, so is there any way to get iLife on the laptop?
    So far, I have inserted the 2nd disc of Leopard and clicked on Install Bundled Software, but kept getting Alert: This software cannot be installed on this computer. And Insterting either of the Tiger discs does not work either.

    Yes, older software will most of the time not load. Especially from a previous OSX. If I remember correctly I had to by iLife when I upgraded, I do have the disks, and I beleive I bought them after I installed SL. (SL did not come iLife)
    They do offer iPhoto on the APP store, but that is V 9.51 which won't run on SL, the most 10.6.8 iPhoto is 9.2.3
    The new iLife'11 has too new versions, that's why I said to buy the OLD version of '11
    I have all those discs as well, I would not have bought "11 if I could have loaded off one of those discs.
    Maybe someone knows a trick to make those old applcations load, and I would be most interested in finding how they did it.
    All the best

  • Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

    I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps.  When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success.  Any ideas short of selling it on ebay or buying a new computer?

    If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
    Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
    It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

  • How can I do a clean install of Snow Leopard with out losing iLife applications?

    I bought my Macbook pro in 2009 and am currently running the Leopard software. I want to do a clean install of Snow Leopard, but I do not want to lose my iLife applications.  I lost the DVD's that came with the computer. Is there any way I can do a clean install of Snow Leopard with out losing my iLife applications?
    Will a regular installation of Snow Leopard allow the App store to recognize that my computer has iLife and mark it as a purchased item in my account. If it can, then would I be able to do a clean install and re-download the apps for free.
    Any help would be appreciated!

    1. Install Snow Leopard normally; this will keep the applications intact. An actual clean installation involves either erasing the partition or creating a blank one, and neither of those will carry the applications over.
    2. The previous iLife installation won't carry over to the Mac App Store, and the Mac App Store versions are incompatible with Snow Leopard.
    (97485)

  • Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its  related to overheating ?

    Just done a replacement of the pata DVD drive (its new and is working ok),  and a fresh clean  install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
    I believe its  related to overheating ?
    iStat Pro shows GPU diode temp at 66 C, CPU at 48 C,  Fan rpms is around 1000
    Any ideas somebody ?
    The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

    1.5-3 minute boot up as opposed to 15-20 seconds
    And
    why it takes a long time to load a lot of things.
    I have restored this
    from a time machine partition.
    TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
    What you need to do to regain your speed is to understand how your machine works
    Why is my computer slow?
    Fix any and all issues in software following this list of fixes
    ..Step by Step to fix your Mac
    Then follow this defrag method I've outlined
    How to safely defrag a Mac's hard drive
    Most commonly used backup methods
    There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
    Hope this assists.

  • Garageband  4.1.2 won't work in Snow Leopard.  Why? Please help.

    Garageband 4.1.2 won't work in Snow Leopard. Why? Please help.

    It might be a PPC application. You may need the optional Rosetta install.

  • HT1338 How to view iphoto library (version 9) in snow leopard

    Hi
    I recently installed OSX Lion and then upgraded iphoto to the latest update.
    My Macbook became so slow since the upgrade to Lion I backed up my iPhoto library and did a refresh install of Snow Leopard.
    My Macbook works quickly again now but when I dragged my iPhoto library into the Pictures folder and then opened iPhoto I get a message saying my library has had changes to it and now I must install the latest version of iPhoto.  I don't mind this but the App Store says I need Lion to get the newest version on iPhoto.
    I don't want to install Lion because it makes my Macbook too slow.
    Any ideas how I can get to see all my photos in my iPhoto library?  I don't care what version of iPhoto I use.  I just don't want to lose my photos or upgrade to Lion.
    Help!!
    Thanks.
    Jon

    Thanks for your quick response.
    My back up was: I copied the iPhoto Library icon from the Pictures folder located on my hard drive.
    All I want to do is copy all the events back into iPhoto.  I opened the Package Content but all I see is folders labelled with numbers, years, months, days etc.  That will be an absolute nightmare to re organise!
    Is there a way to convert my library back to what it was?
    Thanks
    Jon

  • I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

Maybe you are looking for

  • How does OOB breadcrumbs work for multisite environment

    Hi I am currently using CatalogNavHistory and CatalogNavHistoryCollector to display breadcrumbs in my catalog pages. My doubt is with ATG10.1 we are using multisite environment for our project. So one category will be part of more than one site. So h

  • Command Line build - Embedded chm overwriting new chm

    Many of my projects reference material in other chm files. The "link to remote URL" copies the remote chm file(s) into the active project. If I then compile the active project, it also outputs those "copied in" chm files. This is expected behavior an

  • Can't access my wish list

    I receive an "unkown error occurred (-1202)" message.  Don't know how to resolve the matter. Need help.

  • Out of memory error when writing large file

    I have the piece of code below which works fine for writing small files, but when it encounters much larger files (>80M), the jvm throws an out of memory error. I believe it has something to do with the Stream classes. If I were to replace my PrintSt

  • My PlextorPX-708A won't run in DMA mode

    My PlextorPX-708A won't run in DMA mode I've tried reinstalling it and this was also a fresh install of winXP with Service Pack1a, my other dvd dive which is made by shuttle and is older will run in DMA mode and PIO mode but the plextor DVd writer wo