IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

Maybe. See:
Reverting to previous version of Numbers

Similar Messages

  • HT5457 i have a 4th gen 32gb ipod touch but no matter what i do my ipod will not take the ios 6.1 update what should i do?!

    i have a 4th gen 32gb ipod touch but no matter what i do my ipod will not download the iOS 6.1 update. it stops right in the middle of the download ,what should i do?! 

    - Try disabling the computer antivirus and firewall.
    - Next try the manuyal install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks

    Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks

    Hello there, Kumarlmk.
    The following Featured Discussion deals with the issue you seem to be describing and provides some workable solutions:
    The Camera app is suddenly missing from...: Apple Support Communities
    https://discussions.apple.com/thread/5284736
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT5429 I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

    I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

    Maps: Turn-by-Turn Navigation
    Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
    Back to Top

  • HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

    I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

    "I did make a full back up of my phone prior to updating the iOS"
    Itunes content is not incliuded in the backup that itunes performs.
    Audiobooks are not part of icloud and cannot be redownloaded.
    You can try contacting itunes support and asking for an exception.

  • IPad 2 switched off and not charging after iOS 7.1 update

    iPad 2 switched off and not charging after iOS 7.1 update. Pls help me. I have tested my charger. Its working in another device. But my iPad 2 is not charging with other adapters too. What to do??

    Hello, 92.romil. 
    Thank you for visiting Apple Support Communities.
    I would make sure you are using an Apple branded cable with your iPad.  If you are, the troubleshooting steps in the article below may help.  The steps listed below for the iPhone and iPod still apply to your iPad. 
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Jason H.

  • Just purchased a new iMac running 10.9.5, needing a version of illustrator. Do I go with CS6 hard copy or down load or CC? I have 17 years of illustrator files some il 7 some CS. Can you save back to Legacy with CC?

    Just purchased a new iMac running 10.9.5, needing a version of illustrator. Do I go with CS6 hard copy or down load or CC? I have 17 years of illustrator files some il 7 some CS. Can you save back to Legacy with CC?

    Really need to be able to save back to the older versions, in order to output vector files on an older plotter. Running an older application of Mac sign from Softeam, can't get in touch with them. Total pain to upgrade, been dumbing down for too many years.

  • HT201302 I need more space on my iPhone to update to iOS 7.0.6. I was able to import and then delete my Camera Roll but not my Photo Library. How do I do that?

    I need more space on my iPhone to update to iOS 7.0.6. I was able to import and then delete my Camera Roll but not my Photo Library. How do I do that?

    To delete your photo library you need to connect to iTunes, then remove the selection for the images, then sync the device.
    While you are connected to iTunes do the update through iTunes. It takes much less memory as the update is loaded onto your computer, unpacked, then sent to the device.

  • I installed version 5 from 4, only to find Roboform is not compatible yet, I need to go back to 4 til roboform update their software. HOW can I revert back to version 4 ?

    Roboform is as yet not compatible with version . Has I use it on a daily basis version is no good to me at this time. I need to go back to version 4, if there is an easy way other than uninstalling and reinstalling

    That's right, though Firefox 8.0 is newer and would have the
    same requirements.
    To go back to 3.6.*
    For those that really need an earlier version of Firefox, find your system and the Firefox version you want in releases, download and start the install.
    :For the latest of version 3
    * http://www.mozilla.com/firefox/all-older.html
    : Note Mac OS X 10.4 user, and Mac OS X 10.5 users without Intel cannot upgrade to Firefox 4 or higher.
    When reinstalling Firefox from a download, Firefox must be down once the installation starts. When the installation finishes, don't let the install start firefox for you. Instead end the install and start Firefox in your normal manner, thus preventing creating a new profile which does not have your bookmarks cookies, etc (but your old profile would still be around and would).
    Maybe you were looking for this (I think I would stick to 3.6.* on such a machine) No idea if they have anything for later than version 4.
    :You can run an unofficial version of Firefox though, see
    *https://support.mozilla.com/questions/858477

  • Can i revert back to version 3.6.15 after installing ff 4 without losing anything thats been saved

    can i revert back to version 3.6.15 after installing ff 4 without losing

    If you follow the instructions I gave it does not delete the profile folder where the user data such as bookmarks are stored. When you install the earlier version it will use the same profile data so you do not lose your user data.

  • Remote. Where is the rating? How can I get back to version 2.4?

    Remote. Where is the rating? How can I get back to version 2.4?
    <Email Edited By Host>

    After updating remote app to version 3 there is so chance for song ratings anymore.
    How can I upgrade to verision 2.4 and where can I find it?

  • When I started to update to iOS 5, the update went but at the end it said connection has timed out. I tried multiple times but when it gets to processing files, that happens. Help?

    When I started to update to iOS 5, the update went but at the end it said connection has timed out. Help me?

    Have you tried disabling the computer's security software during the download and update.

  • Hi When I update my ios to last update , I couldnt get app from appstore ,I am from Iran.

    Hi When I update my ios to last update , I couldnt get app from appstore ,I am from iran,I Could Download App in 3 days ago.

    neoshang13 wrote:
    ...I lost my backup file, ..
    If the App has been Deleted and you have No Backup... then you have a problem...

  • I want to replace my PC with an iPad Air.  Can I sync my iPhone solely with the iPad, never needing a computer?

    I want to replace my PC with an iPad Air.  Can I sync my iPhone solely with the iPad, not using a computer?

    Dam Commander wrote:
    I want to replace my PC with an iPad Air.
    I love my iPad Air. However, you may want to give the idea of using it to replace a full-fledged PC some thought. If your primary uses are websurfing, email. writing, reading, light photo editing, it will be fine. Other things may not work so well on an iPad.

  • PDFs do not open after iOS 7.1 update

    I've got several employees that now report not being able to view PDFs on the iPad 4 now that they have updated the iOS to 7.1. The PDFs will open fine on their laptops and PCs, so they are not corrupt files. We've tried using the default Quick Look, Bluebeam Revu, and Adobe Reader.
    I tested the exact same PDF files on an iPad 4 that was still running 7.0.xx and the files opened perfectly fine with all three apps mentioned above. Once I updated that iPad to 7.1, it behaved like my other employee's iPads.

    Did a full backup of iPad to desktop iTunes.
    Did a reset of all apps and data on the iPad.
    Performed restore from iTunes.
    Also removed from MDM monitoring, removed all MDM profiles.
    No change in behavior. On an occasion where a PDF will consistently open, it appears to be from a copier scan and not one that was created in another application and then converted to PDF (like architectural CAD drawings). We access building drawings in PDF all day long from different sources. We never had this issue before iOS7.1 was released.
    Some PDFs will open in Quick Look, some in Adobe Reader and some in Bluebeam Revu (or Vu). Most don't open at all in Quick Look or cause Bluebeam to crash (back to home screen). Adobe Reader says the file is corrupt. But ALL of them will open on laptop or desktop computer.
    Any other suggestions are welcome...

Maybe you are looking for

  • How to dock scrollbars to window in Mountain Lion?

    The scrollbars now float over the window and only appear when necessary. However, I'd like the scrollbars to dock themselves to the window frames as they did before. Anyone know how to do this? The reason is because the bottom item in a list always g

  • Configure ASM Instance in RAC cluster - problem

    Linux RH4 with Oracle 11.1.0.6 I previously had ASM working in a RAC environment, but have uninstalled on all 3 nodes following Oracle guidelines. When I attempt to re-configure ASM it states that an ASM instance is located in nodes 2 and 3. Previous

  • Script for current date

    I have a document javascript that used to work. It prints the current date upon first opening the PDF into a field called Today. Thereafter, the date does not change no matter how many more times the PDF is opened. var f = this.getField("Today"); if

  • "HTTP 404" error when trying to Run Mobile Application

    I am getting "HTTP 404" File not found, when i click MTR Application installed on MI Client using Setup package.

  • APs showing 'not associated' and 'not registered' in PI 2.1

    I have got a weird issue in PI 2.1.0.0.87. WiSM2, running on version 7.4.121.21, shows reachable and managed/synchronized in PI. However, the APs managed by it show 'controller IP->not associated' and 'not registered'. It is been confirmed that the S