Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.
Similar Messages
-
Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??
Also my Itunes and computer won'r reconize it
-
How do I get my ipod touch 5th generation to always use my car speakers when I plug it into the USB port?
If the problem occurs after you restore it to factory defaults/new iPod then it is likely a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
-
My iPhone 5 Bricked after plugging it into the USB port on my AT&T car charger
I plugged my factory USB cable from my iPhone 5 into the USB port on my AT&T car charger and it killed the iPhone 5 dead. I guess I thought since Apple is making a 30 pin converter and that all of my other apple products work this way that it should work...I guess I was wrong!
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Volume problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Apple store said the USB SuperDrive would work as a secondary drive with my iMac.
After plugging into my USB port, I find it doesn't work. Has anybody else tried this.Which USB Superdrive are you referring to? If this is the one:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
it states it works with Macbook Air, Mini, or MBP with Retina display. If they told you differently, take it back for a full refund and show them their own website. -
Any help would be greatly appreciated. I am new to Mac and am not sure how to get my camcorder to be recognized by ny Mac.
Welcome to the forums.
To get the best array of responses, you should post your question as a new inquiry. Perhaps save yourself the time, however, and do a search on "MPEG Streamclip" in this forum and you'll see a variety of suggestions. Also, here are a couple websites:
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Using MPEG or DVD footage
http://www.danslagle.com/mac/iMovie/tips_tricks/6010.shtml
John -
Itunes won't recognise that I have plugged it into the USB ports.
I have checked my USB ports - and they work fine.
The only problem is that for some unexplicable reason, Itunes has just decided not to recognise that my Ipod is connected whenever I plug it into my laptop. This has just happened all of a sudden.
This very same IPOD was working fine this last month.
Can someone tell me how to get the Itunes program on my computer to recognise that my IPOD is connected so that I can add some songs to it?
I have had so many flipping IPODs break on me. This is a brand new IPOD, and I've only had it for less than a month. How can the company that make IPODs be so evil to people like me. Do they think I have money coming out between my legs? I'm so flipping fed up. I take such good care of IPOD. I never fill it up with too many songs. And for this IPOD, all I have put on it was songs bought through the Itunes website.
So can someone please tell me how to get the Itunes program on my computer to recognise that my IPOD is connected so that I can add some songs to it?
PLEASE!Hi there,
have you recently updated iTunes since last month?
You maybe also want to check whether "iPodService.exe" is running. To do so, start up iTunes, press CtrlShiftDel and look in the processes (not the application-tab ) for "iPodService.exe". If it isn't listed try to start it manually. -
My Ipod4 won't charge, turn on or connect to my computer when I plug it into the USB port.
I plugged my Ipod 4 into the wall charger and into my mac and it wont turn on no matter what I try or do.What do I need to do to turn it back on?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and maybe:
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My itouch won't charge. I keep getting a warning that the battery is running low. When I plug it in nothing happens. Thanks.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I used to have the same one before and had used it this mac with success! So I don't understand why this is happening!
I used to have the same one before and had used it this mac with success! So I don't understand why this is happening!
-
WiFi device that plugs directly into the USB slot on a printer?
My next door neighbor has a MacBook with Airport installed. She wants to use the portable around the house and send documents to a printer located in the basement. She does not need a router to network additional devices, so what is the most reliable, reasonably priced device that plugs directly into the printer's USB port without the use of a cable (e.g. device with receiving antenna)? Thanks.
BobWell, Badunit, it's more convenient and takes up less room if it plugs directly into the USB port, plus you save the cost of a cable unless one ships with the unit. Here are two I found at Amazon:
http://www.amazon.com/Compact-Wireless-802-11n-Newtork-Adapter/dp/B002VVITG8/ref =sr_1_6?ie=UTF8&qid=1311880281&sr=8-6
http://www.amazon.com/802-11g-Wireless-Long-Rang-Network-Adapter/dp/B0035H4164/r ef=pd_cp_e_4
Trouble is, they have too many negative reviews. Besides, just how well do they work with the Airport Extreme card since most of these reviews are not Mac related, and those that are are negative?
I'd like a device that is guaranteed to work well with the 2008 MacBook Airport card as the broadcast device. Perhaps she will have to rely on a separate Linksys router with print server. -
I installed new 11.1.4 iTunes update and it took out my USB ports on my MAC and will not now power or connect my Itouch or iPhone to iTunes
Now my Iphone is connnecting but my Itouch is not connnecting since 11.1.4 update. Come on and fix problem from your poor update.
-
I run SmartBoards connected to iMacs running 10.7 and 10.8 throughout my school. On one of these computers the mouse has recently started freezing the minute a SmartBoard is plugged in to the USB port. The mouse 'runs' to the bottom right side of the screen, a cloud often is under the pointer, and it is not longer interactive. You can move the mouse upward a bit with the cloud following some of the time but it does not work. Once the SmartBoard is unplugged the mouse works normally. This particular computer worked fine with the SmartBoard until recenlty. Any solutions or ideas?
1. Reset the Pram and SMC
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ph14222
If these don't relate to your computer a quick web search will get you details
2. Run the Disk Utilty to verify the disk and then repair permissions. -
I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.
I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
http://compare.ebay.com/like/320779457703?var=lv<yp=AllFixedPriceItemTypes&var =sbar -
I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't! I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected. HELP!
Ask the Verizon store to exchange your iPhone for a different iPhone 4.
UPDATE - Sure, try ckuan's solution first. Then use mine if that fails.
Message was edited by: sberman
Maybe you are looking for
-
Hi, I have a auto customization search page. I have used a VO in table region. after search it returns 3 or 5 rows. but in controler i am getting more than 2500 rows. not able to iterate the vo. the code is below. if (pageContext.getParameter("saveBG
-
is there a way to connect a projector and reciever to my macbook pro?
-
Process a formula that is in an string
Hi, does anybody know how to process a formula that comes in an string? Por ejemplo: a = 1. b = 2. c = 3. string = '( a + b ) * c'. string = '( 1 + 2 ) * 3'. how can I get the result of that formula. Thanks in advance.
-
Port Forwarding and Static IP addresses
Netcomm NB1300 router and Airport Express. I want to use and old G3 mac running 10.3.9 as a server for HTTP and FTP. The Mac is currently connected via Airport but I can connect it via Ethernet if necessary. I understand that I will have to activate
-
Hi all, we are trying to integrate a language-selection to our vi. The language of all labels shall be changed via one click. The translations are written in a MS Access database at the moment, but could be stored in a MS Excel Table. How can we defi