Ipod Classic 160 video problem

So, I can watch all the videos I have ON the ipod, however I can only watch on tv's using my component video cable. Neither composite mini to video/R/L cable nor ipod port to svideo/r/l cable worked. Do you have to use an hd monitor to watch video on the 160?

Update to this, I used the iTunes convertor and it converted it to .m4v I believe and it worked fine, but it's lame because instead of compressing it, it's now like 3 times the size :/

Similar Messages

Ipod classic 160 sync problem

So a couple of days ago my iPod classic was operating erratically and I read a few posts and decided to do a restore. After a long time trying I managed to get it to do a full reformat. I haven't been able to get it to sync since. I have tried what seems every suggestion on here. I can see it in device manager no problem, it says that its connected on the iPod itself, It does show up in iTunes if I remove and plug it back in but only for a split second (it looks like a small window appears below the icon) and then it disappears again. If I perform a DFU restore it goes through restoring the device through iTunes again (so it is possible it can be recognized) but when it gets to the point where it tells me it will sync upon reboot - the icon for the iPod flashes up in iTunes, and then disappears again as above. I have also tried to do the HDsmart data and this works, details as below:
Retracts:18
Reallocs:0
Pending sectors:0
Poweron hours : 167
Start/stops: 69680
Temp current : 31°C
Temp min: 53°C
temp max: 248°C
I know the max is high but I think its a bum reading. It was operating mostly fine before apart from having to reboot using the Menu/select button every week or so...
Any help would be appreciated.

Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists?

Ipod classic 160 gb problem... AWNSER PLEASE I NEED HELP!!!

I HAVE A BIG PROBLEM TODAY WITH MY iPOD!
I wanted to listen music this morning, but my iPod kept freezing whenever i clicked the music i want to listen, i called Apple Canada Support, they sent me 2 e-mails about reseting my iPod and restore my iPod to its factory settings. I reset my iPod, luckyly it worked.
But when i wanted to connect my iPod to put some music, all my songs and videos and podcasts are gone! And everything is gone on my iPod when i connect to iTunes, when i disconnect it, it has all my songs on my iPod.
Then it says ''TAREK'S IPO'' but the iPod's name is ''Tarek's iPod'', then everything its empty when i connect it, it looks like the disk is empty.
Then i get an error box and it says: ''iTunes cannot read the contenets of the iPod ''TAREK'S IPO''. Go to the summary tab in iPod preferences and click Restore to restore this iPod to factory settings. OK.
Then i click OK, then it takes me to the Summary tab, and it says on the DEVICES section: iPod, then on the summary tab on the top it says:
iPod
Name: iPod
Capacity: n/a
Software verision: 1.1.2
Serial number: .................
I am so ******!! I cannot belive it just happened to me for the first time
Please someone help me!! please reply to this topic And i have some pictures to proof it that its not true!! PLEASE I BEG YOU SOMEONE HELP ME!!

Your symptoms resemble those in this article: Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear. Changing the drive letter assigned to the iPod may help. 3rd party USB device drivers have also been known to interfere with iPod communications. E.g. I had an Epson printer that I had to disconnect before connecting any other USB drive.
tt2

IPod classic 120GB: video problem

I am having problems putting movies on my iPod. I've converted the files from .avi to .mpg. However when I sync them to my iPod it says "'Movie Name' was not copied to the iPod 'Name' because it cannot be played on this iPod."
I only recently have had this problem. I have put one file on before, but now it doesn't work. Any answers would be GREATLY appreciated.
Thanks

Update to this, I used the iTunes convertor and it converted it to .m4v I believe and it worked fine, but it's lame because instead of compressing it, it's now like 3 times the size :/

IPod classic displays 'No music' after sync, HDD problem? Geschiedenis • Verwijder So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn't find any files on the iPod anymore. H

So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
Thanks in advance!

Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists?

Problems in compatibility of iPod radio remote with iPod classic 160 GB

Hi all,
I have just bought a iPod classic 160 GB and want to buy a iPod radio remote as well. However, after I have done my research, I find the radio remote is not compatible with iPod classic perfectly…
Do you think it is a good idea for me to wait a new radio remote (maybe) or later Apple will release update?
Thanks

I use my Radio Remote with a Classic; it does everything that it had with my 5G-Video EXCEPT it will not allow me to set radio stations, either with the Radio Remote's control or the iPod's control.
I have spoken with an iPod specialist (Apple Care) and according to him Apple has acknowleged less than 100% compatibility/functionality with the Radio Remote and the Classics. One of the reasons, he stated, was that several 5G-Video iPods were "getting fried" when the Remote was not fully connected to the docking-port. So Apple has decided to reengineer the port [for better a connection, I gather]. What puzzles me the most about the new generation of iPods is why they were rolled out without warning customers that their Car-Charger, Video Player, dock, AV Cable, or APPLE'S OWN Remote will not play nice with each other!
This go around, it's find out the hard way.

HT1386 I sync all songs, photos and videos between my computer and iPod classic with no problems, but when I get to sync info I get this message: "iTunes cannot sync Calendar and contacts to iPod. Try logging out of Windows adn then logging back in".

I sync all songs, photos and videos between my computer and iPod classic with no problems, but when I get to sync info I get this message: "iTunes cannot sync Calendar and contacts to iPod. Try logging out of Windows adn then logging back in". Could you please help?

Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books.

Ipod classic 160 usb not recognized

Ipod Classic 160 (not recognized by computer) and under Ipod Diagonistics (no Ipod found). I have two other Ipods which I-Tunes and my computer recognizes. I have reset Ipod to no avail. Because I am unable to connect to I-Tunes with the Ipod I am unable to restore or reset. I have watched all the YouTube videos and followed each. One thing that is strange is it will not test or disconnect from disk mode. I really enjoyed this I pod and hope one of you can resolve this problem for me. Thanks

Howdy spacecraft24,
Welcome to Apple Support Communities.
From what I gather, your iPod classic isn’t recognized by iTunes on your PC. Take a look at the article linked below and try running through the troubleshooting suggestions that it provides.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Take care,
-Jason

IPod Classic 160 Gb - iTunes is SLOW and where are my Podcasts?

I just upgraded to an iPod Classic 160. I have experienced 2 problems, but not with album art.
First, iTunes is very slow. It seems to freeze for minutes at a time when performing any operations on it.
Secondly, I have a lot of Podcasts - both video and audio.
I can download them with no problem. I can see them in the contents pane in iTunes for my computer. I can play them in iTunes and I can sync them with my new iPod (apparently).
However, they do NOT show up on my iPod. The new contents screen shows No Podcasts. When I do a search for them they show up as songs and I can heard the video podcast soundtracks.
In iTunes with my iPod connected they show up under both the iTunes directory and in the iPod Directory immediately after syncing. However, if I eject and then reconnect the iPod, upon reconnection they no longer show up in iTunes in the iPod directory.
I am assuming this is a bug with either iTunes 7.4.x in the way it categorizes Podcasts or it is an OS issue with the iPod. I have the latest versions of iTunes, the latest SW and Firmware updates for the iPod and have rebooted to assure that the latest versions are the ones running.
Anyone else experience these? Anyone find solutions?
Thanks.

I'm having very similar problems.
In addition to iTunes becoming completely unusable for a few minutes (completely frozen) when I plug in to sync and recharge, the unit itself seems to periodically hang for more than a few seconds as I navigate the menu.
My podcasts disappear from my iPod classic every time I sync, whether or not I listened to them.
Every once in a while it just shuts off and requires a manual restart to come back on.
The battery seems to drain far faster than what makes sense, and all I do is listen to music. Two hours into my listening time and the battery meter says its almost a quarter drained!
At this point the thing keeps randomly rebooting for no reason when I am using it. Also, as I'm typing this, I heard the click of death from the hard drive.
One thing of note though, I noticed that I had set up LastFM with the thing when I first got it. I doubt it would cause half the issues here, but it is a variable to consider.
I have restored this device three times since it arrived. In addition, I'm finding myself restarting it at least twice if not more per day.
I have put in a request to warranty this thing. This soon after ordering it, and after all the things I've done, my experience screams that this unit is defective. Either that, or Apple is gonna need to issue a recall. I really hope it is just the former.

IPod Classic 160 GB doesn't work for audiobooks in BMW X3 F25

Hello
I have been owning a 160 GB iPod classic for a while now. I have newly acquired a BMW X3 (2012 Model, F25). The problem is that when listening to audiobooks, the iPod doubles or triples the speed (and pitch) when I return to the car after having parked. So it runs fine at first, then I stop and park the car and return and then it sounds like Donald Duck is reading to me ;-)
The car comes with the USB interface to which once can connect media players like the iPod. I am using the original BMW "Y-shape" cable that has once connection on the iPod that then splits into an USB and a 3.5mm jack. I also tried cables from Belkin and the cable that came with the iPod, but all to no avail.
It is not the Audiobook faster/slower function of the ipod that is activated because that would not change pitch, it's like "the record is turning too fast", you can see the seconds in the car's display movig much faster than at a second's pace. The iPod subsequently retains this increased speed even if not connected to the car anymore and can only be slowed down again by resetting it.
I onw an older iPod photo 80 GB which does not exhibit this behavior.
The iPod classic 160 is at the latest software level and so is the car.
Any ideas?
Regards
Chris

Having the same issue. See https://discussions.apple.com/message/23993137#23993137.

Ipod Classic 160 will not synch with Itunes

Message from Itunes when I connect Ipod Classic 160 is "Software required for communicating with the Ipod is not installed correctly. Please reinstall Itunes" I have reinstalled 7.6 several times and tried 7.5 but nothing works. I have tried the 5R's. Nothing. When I connect the Ipod to another older Seanix with Itunes 7.5, it works. Can anybody out there solve this problem. I have been going round and round for 10 hours. Cheers.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Patrick

Ipod classic 160 not visible in tunes 12

My perfectly functioning ipod classic 160 gb is invisible to itunes. It shows on the ipod screen it is connected and it shows on the imac screen as an ipod. In itunes it does not exist. It worked perfectly with itunes before the upgrade. I have seen the device bar and my iphone 5s displays there normally and functions perfectly. When only the ipod is plugged in, there are no devices in the bar and the itunes menu for device is greyed out.

If you have not, disconnect all USB devices (including any hubs). You can leave standard keyboard/mouse connected, if used. With iTunes running, connect iPod to a direct USB port by itself. This is to rule out a problem a conflict between connected USB devices, or a lack of power on the USB bus for all connected USB devices. If you already tried that, or it does not help...
Since the iPod appears initially in iTunes, the problem may be a "feature" that recent Windows PCs, with Windows 8 and USB 3.0 ports, seem to have. It is an "energy saver" setting that turns off full power to the USB port if the connected device is deemed "inactive" by Windows. When you connect the iPod, iTunes does its initial sync for a few seconds. That's when the iPod is seen in iTunes. After the sync, iTunes unmounts the iPod's disk. If Windows considers the iPod to be inactive and turns off full power to the USB port, that is when the iPod disappears from iTunes.
If this is the cause, you may be able to go into Windows Control Panels and turn OFF this feature (so USB ports always stay at full power). If that does not work, or you can't find such as setting...
Alternately, you can Enable disk use on the iPod. With disk use enabled, the iPod's disk remains mounted by the system until you Eject the iPod in iTunes, so the port remains at full power. This may be difficult, if you don't have enough time to click on the iPod in iTunes and check the box for Enable disk use on the iPod Summary settings screen (and click Apply). I'm assuming you have your iPod set to automatically sync your entire iTunes music library. If so, you can extend the iPod's initial sync (when you connect it) by making a significant change to your iTunes music library (before you connect it). If you happen to have some music CDs that you need to import into iTunes, that would work. Add new songs to your iTunes library, and then connect iPod. If you use the Sync only checked items setting, you can uncheck a large number of songs in your music library, connect to sync, then recheck the songs, connect to sync. Making iTunes sync a few dozen songs during the initial sync should give you enough time to go to the iPod's Summary settings screen, and check the box for Enable disk use (and click Apply).
If that does not work (or the iPod still disappears quickly even when there are changes to sync), the cause something else. FYI - It's not because iTunes 12 does not support discontinued iPods. I have an 3rd gen "classic" iPod from 2003, and it works fine with iTunes 12.

I want to exchange my ipod classic 120GB to ipod classic 160 GB, but I live in istanbul .. how can you help me

I have problem with battery is stop
So I want to exchange my ipod classic 120 GB to ipod classic 160 GB
I live in Istanbul . Turkey

Hi maeda.sham,
I apologize, I'm a bit unclear on the exact issues you are having with the battery in your iPod Classic. If you are having battery life issues, you may find the troubleshooting steps outlined in the following article helpful:
Apple Support: Accurately determine your iPod battery life
http://support.apple.com/kb/ht1322
Regards,
- Brenden

Ipod classic 160 using 30GB laptop

Is there a way to import my extensive cd collection (at least 160GB worth) to my ipod classic 160 using a laptop that has only 30GB? Can I somehow use my 1TB external drive to help get all the music onto my ipod? So far everything I import to itunes goes directly on my laptop which has been quickly overloaded. Can anyone give me an idea of what to do here. This was so easy using non apple mp3. There must be a way!

First, there is no need to convert mp3 files to AAC, iTunes and iPod support mp3 just fine. So, you can rip your CDs in iTunes in the mp3 or AAC format, or any of the formats supported by iTunes.
Second, it sounds like you’re interested in moving your library off of your laptop and onto your external drive, no problem! That makes it easier to help if that is your ultimate goal. But just to make it clear, there are a few considerations you need to be aware of:
a- iTunes has a “Consolidate Library” utility that lets you port all your music files to a new location. Doing this leaves the original music files in place and creates copies in the new location. So, you need to decide if you want to keep the originals or delete them once they are all copied to the external drive. You can make that choice later.
b- When you consolidate your library to your external drive, iTunes will have to manage the organization of the files and folders. So, if you’re using your own way of filing your mp3 files and not letting iTunes manage it, then consolidating your library will copy all your files into the iTunes organization on the external drive (but your original files will remain where they were).
c- Having an iTunes library on an external drive works just fine but there can be a few quirks. If you have a PC, sometimes Windows decides to change the drive letter of your external drive for no apparent reason. Also, if you start iTunes and it can’t find the external drive (disconnected, power off, new drive letter, etc.) then iTunes will open with a default library, which it expects to be on the C:\...\My Music\iTunes location. If you don’t have a library file in that location, then iTunes will create one and open up with a blank library. However, both of these risks can be handled easily and are recoverable.
d- You can have multiple iTunes libraries, such as the one on your external drive and perhaps the original library on your laptop. However, all libraries are independent so when you change one there is no change to the others. If you manage multiple libraries, you need to decide up front which will be your primary library. Since you have a capacity limitation on your laptop, your primary would be the external drive. The reason to decide this is so that (1) if you auto-sync your iPod, you want it to reflect what’s in the primary library, which may be different from the one on your laptop, and (2) when you add new music, make tag changes, make new playlists, etc., you make sure you’re doing that to your primary library so that the changes get put onto your iPod. So, if you decide to keep the original library on your laptop as an auxiliary library, then you should not auto-sync your iPod with that library open since over time it will differ from your primary library on your external drive. Also, when adding new music, do that with your primary library open, not the one kept on your laptop. With some experience, you can learn how to add new music to your external drive, then also add it to your laptop, but I won’t get into that now.
So, if you’re ready to go through with this, follow these steps:
1- Make a backup copy of your "iTunes Library.itl" file. By default, this is located in your C:\...\My Music\iTunes. Keep a copy of this file in a safe place just in case something goes wrong with the consolidation (see step 9 for recovery). You should make a habit of backing this file up anyway since it contains all your playlists, song ratings, and play history.
2- Create a folder on your external drive where you’re going to put your music files. If you have some music already on the external, I don’t recommend putting your new library there, create a separate folder (e.g. E:\iTunes Music). If you already have some music on the external drive that you want in iTunes, you will add those at the end of this process.
3- Start iTunes and go to your iTunes preferences (Edit/Preferences, then click on the Advanced tab). Next to the “iTunes Music folder location” window, click on the “Change” button and navigate to the folder you created in step 2. iTunes will put up a message indicating something like “updating library” but that doesn’t actually move your library.
4- While still looking at your iTunes preferences, make sure these two options are selected: "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
5- Select the iTunes command Advanced/Consolidate Library. iTunes will warn you that this is a big change, so let it rip if you're ready. iTunes will copy all your laptop’s library to the new location on your external drive. This may take awhile if you have a large library.
6- When the consolidation is complete, right-click on any song and select Get Info. Check to see that iTunes has the native file stored in the new location on the external drive.
7- This step is optional, but I recommend doing it to help prevent problems with drive letter changes, and it makes your iTunes library completely portable to other Windows PCs running the same version of iTunes as your laptop. Close iTunes and go to the C:\...\My Music\iTunes folder. Move (don’t copy) the "iTunes Library.itl" and "iTunes Music Library.xml" files to your external drive. You can put them anywhere but I recommend a folder that is easy to see and understand (e.g. E:\iTunes Library Files). Now, hold the Shift key while you start iTunes – keep holding the Shift key until you are prompted to “Choose Library” or “Create Library”. Select “Choose Library” and navigate to you put the "iTunes Library.itl" file on the external drive. iTunes will start up as usual. Note that holding the Shift key while you start iTunes is how you toggle between libraries, and how you can create a new (blank) library. Also, iTunes remembers the location of the last library it opened, so you don’t need to use the Shift key to re-open the library you last used.
8- If you had music on the external drive that you want to add to iTunes (now that you have extra capacity on the external drive), then simply drag and drop these files directly into your iTunes library. iTunes will make copies of these songs and organize them in the new folder structure you’ve set up – you can delete the original copies of these songs once you confirm that they’re new location in iTunes is set.
9- If any of the above steps got messed up, or you’re not happy with the results, then simply restore the copy of the "iTunes Library.itl" file you backed up in step 1 (put it back in the same location), then hold the Shift key while you start iTunes and navigate to the original "iTunes Library.itl" file location on your C: drive.
10- If all is well and you don’t want the original files on your laptop, then delete away. If you decide to keep the original files as an alternate library, then do the same as in step 9 to restore the original library. You can then toggle between libraries by holding the Shift key while starting iTunes and selecting the appropriate "iTunes Library.itl" file. Note that to change from one library to another, you need to close iTunes and restart it with the Shift key being held – you cannot change from one library to another with iTunes open. Also, sometimes it helps to put something in each library so that you can easily tell which one you have open. Maybe create a folder in the iTunes source column called "Primary" or "Secondary" so you can tell when you open one library vs. the other.
11- If you launch iTunes expecting it to open the library on your external drive and it comes up with an empty library, or the original library, that may mean that your external drive is not being recognized by your laptop. Check to make sure it is active, then re-start iTunes with the Shift key and select the "iTunes Library.itl" file on the external drive to return to your primary library.
12- If you have other PCs with the same version of iTunes, you can connect your external drive to them and use the Shift key as you launch iTunes to select your library. This makes your library portable to other computers – cool huh?

My ipod classic 160 gb suddenly became 0 kb free after i restored it to factory setting

my ipod classic 160 gb suddenly became 0 kb free after i restored it to factory setting. it should be a lot more. I dont know what to do with it. I tried resetting it, but it still says "0 kb free" in the setting area.

For your info,
restored it to factory setting
means erasing everything in your iPod, and putting back factory defaults, ie no music.
read this Apple Support Article on Restore
You must have music in your iTunes Library and then press SYNC button in iTunes, which will populate the iPod.
Watch this Apple Support video on Sync iPod
If you dont have any music in your iTunes library or somewhere in your PC, then buy some or import from CDs.
Have a nice day!

Ipod Classic 160 video problem

Similar Messages

Maybe you are looking for