Ipod classic not responding, reseting, or recognized by itunes or windows

ipod will not turn on,rest, etc. screen flashes when hooked to computer, and when going through 5 steps of troubleshooting, the apple will briefly show up. Does not charge up after being hooked to computer. no longer recognized by itunes or window (all updated and reloaded)

Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

Similar Messages

  • Ipod Classic not responding in i-tunes

    My ipod classic is coming up with an error message in my i-tunes account stating there is a problem with this drive and that my ipod is not responding.
    Also, before I plug my ipod into the computer the itunes is working fine then when I plug it in, it goes to a hault and this error message shows up.
    I can't figure out why or what to do. We have uninstalled itunes and reinstalled and the same things are still happening.
    I'm not sure if it is the new version of itunes that's the problem or if it's because our computer is now windows 8.
    Any help would be appreciated. I'm hoping someone else has maybe come across this issue and would be able to help me.
    Thanks!

    I had this problem with my iPod Classic a few months ago. I ended up reverting my iPod back to factory settings.
    This may also help;
    http://support.apple.com/kb/TS3716

  • IPod Nano 7th gen not turning on but recognized by iTunes and Windows

    My two-month old 7th gen iPod Nano is not turning on. I've reset and restored it using both Windows (My Computer) and iTunes and have downloaded the and installed the latest version of iTunes. It was working fine and now just will not turn on. It is being recognized by Windows as a removable disc and by iTunes as an iPod that I can sync data onto.
    I've tried the 'hold the power button for 5 seconds' trick to try to manually reset it, as well as other variations with pressing down on the power and menu keys simultaneously. The iPod is new, ordered online and the nearest Apple Store is over 2 hours away from where I live.
    Please help?

    Hello, M.Ram.  
    Thank you for visiting Apple Support Communities.  
    I understand that the screen on your iPod nano is black, but is recognized by iTunes.  Take a look at the troubleshooting article below as it may provide some troubleshooting steps that may help.  However, if the issue persists, see the section labeled Issue not resolved.  
    iPod nano (7th generation): Hardware troubleshooting
    -Jason H.  

  • IPod Classic not syncing all my songs from iTunes

    Background: I've had my 160GB iPod classic for 5+ years and been using iTunes for close to ten years. I'm using Windows 7 on my PC and up until recently I've been updating both iTunes and iPod whenever updates are available. After the horrible experience of upgrading to iTunes 11 and trying for over a month to get used to working with all the annoying bugs and compromises in functionality that Apple stupidly introduced into what was once a really good piece of software, I decided a week ago to downgrade to version 10.7. I went thru all the necessary steps to make this downgrade work, eliminating the various error messages, etc, and it appears now that my earlier version of iTunes is fully functional.
    But when I connected my iPod to sync new songs, I kept getting a message to scan and fix the disc on my iPod. I wasn't sure if I should do that so I ignored the prompt a few times. Then last night I decided to restore my iPod and start from scratch. The disc error message has gone away, but now it is not syncing all the songs it is supposed to.
    Af far as I know there are no broken links and all the songs in my music library are located within iTunes, so that is not the issue. There may be some songs with the same title and artist but that appear on different albums, so those should not cause a problem. At this point I have too many songs to fit on my iPod so I have selected to sync only checked songs, and I have unchecked over 1000 songs in iTunes, so that when I connect the iPod, it doesn't tell me that there is not enough free space to sync the iPod, it just syncs the checked songs.
    Before restoring my iPod, I had 14161 songs in iTunes, with 1105 of those songs unchecked so as not to sync them in the iPod. I did the math and that left 13056 songs that are checked, and that was how many songs showed up in the iPod after syncing it, with about 1GB of free space left on the iPod.
    Now, after restoring my iPod, I get only 13009 songs showing up in the iPod, meaning 47 songs are missing (with exactly 1.4GB free space).
    How can I troubleshoot this to find out what songs are missing and why, and then fix it? Is there an easy way to approach this daunting task? I am really fussy about my music library and am not the kind of casual user who just loads a bunch of stuff on my iPod and doesn't care if there are duplicates, broken links, missing songs. I manage my own library very assiduously each time I import new music and make sure it is tagged and filed correctly according to my own system. I want to fix this issue.
    Could it be a problem with me using a newer version of the iPod updates with an older version of iTunes? And is there a way I can correct that, possibly downgrade the iPod software version I have now? Would it be worth the trouble to try restoring the iPod again, and if so, what precautions do I take to prevent the same thing happening again, where not all my songs get synced to the iPod.
    Thanks to anyone who can offer some helpful advice...

    Check through this.
    http://support.apple.com/kb/TS1420

  • Brand New 160GB Ipod Classic Not Responding to USB 2.0 connections Why?

    I bought it online from Apple as a Christmas gift back in September. It charged succesfully using a wall charger but when connected to Windows PC's and Laptops(also running windows)neither computer recognized the Ipod as a connected device. The Ipod itself did nothing when connected. It showed no error screen nor did it begin to charge as most do when you connect them to a PC. What is seen on the screen is all the different menus you have to choose from like music, video and what not. All the stuff your supposed to see. I have no idea why it is not being regoznied by any PC unless it is incompatable with USB ports. If that's the case what am I to do about it? Aside from not connecting to PC's it appears to be working fine. The preloaded games play as they should and it does nothing out of the ordianary. Wall chargers work with it but attempted connections to PC's with USB 2.0 ports garner no response from the device. Any help would be greatly appreciated.

    I had difficulty making my 160GB Ipod classic recognized as a device by my PC. I pushed and held down the menu and cener buttons for a bout 5 seconds. The apple logo appeared and ever since then my computer sees it as a device and it works as it should.

  • IPod Classic not syncing or showing up in iTunes

    My iPod Classic 160gb went on the fritz recently. It doesn't show any of the music and won't show up in iTunes when I plug it into my computer. I tried to reset it by hodlding down menu and select until seeing the Apple, but nothing changes. I then tried to go through disk mode, which I'm able to do on the iPod, but it still does not show up in iTunes. It does show up on my desktop though. I'm stumped. Any ideas???

    If it shows up in the Finder as an externally mounted drive, try doing a low level reformat of the iPod's hard disk.  This has corrected this same issue for a handful of other users recently.
    Use the instructions in this article to walk you through the process.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • Ipod Classic  not showing up to disconect by clock on windows 7. How do I disconect?

    I just got a new computer. How do I disconect ipod classic from windows 7?  No  icon by clock Help. any ideas?

    Or see here: Safely Disconnect iPod
    B-rock

  • IPod will not sync/charge/be recognized in iTunes.

    I have an iPod Touch 32gb 2nd generation that is not being recognized by my computer at all. I've checked the Device Manager and iTunes looking for it, and it isn't showing up. I'm using Vista and the current version of iTunes.
    The screen is recursively showing the Apple logo and the "low battery" sign over and over again as the iPod is attempting to charge - it's been plugged in well over the 10 minutes that it's supposed to charge, and it's appearing not to charge.
    I've used two different charge cords, tried to reset the iPod, and restarted the computer to get it to do something. Nothing is happening.
    Can you help me?

    I did, and I thought that I had tried everything. I actually just looked in my computer again for the device, and for some reason, it is now showing. It's Murphy's Law at work, I swear. My iPod is now charging.
    Thank you for your help, even if it ended up not being necessary. It is greatly appreciated.

  • Failed sync, now ipod will not shutdown, reset or connect to iTunes

    Was syncing my ipod touch 4g and the sync failed with a message something along the lines of "cannot sync as there is already a sync running".
    Now the ipod is really slow. It will now power off. Hard reset brings it back to the same state. When I plug into PC, itunes hangs for a while, but does not recognise the ipod.
    Any suggestions?

    I would reboot the computer and then place the iPod in recovery mode and then try to restore it via iTunes on your computer. For recovery mode see:
    http://support.apple.com/kb/HT1808

  • IPod classic not recognized in iTunes and in Finder, doesn't charge

    iPod classic not recognized in iTunes and in Finder, doesn't charge and even doesn't charge outside of Macbook. I've tried rebooting Mac, rebooting iPod, I installed once again iTunes but nothing works Everything was fine until the latest iOS and iTunes update. Please help me :-)
    OS X Mavericks 10.9.5; iTunes 11.4

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • Ipod classic not being recognized

    I was trying to sync my ipod classic, and all of sudden the driver was not recognized, and the ipod went just blank. Now i have a white screen, and it will not trun off.

    Hi nallurs,
    Welcome to Apple Support Communities.
    You may find this article helpful for troubleshooting an unresponsive iPod:
    iPod troubleshooting basics and service FAQ
    http://support.apple.com/kb/TS1382
    If the trouble with syncing using iTunes persists, these articles might help as well:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Best,
    Jeremy

  • My Ipod Classic (160G) no longer synchs completely with iTunes (93G).  Have reset and restored to no avail.  AM about to try roll back to a previous version of iTunes, which has been on auto update.

    My iPod Classic (160G) used to sync flawlessly with iTunes (93G).
    Recently, there seem to be fewer folders syncing.  In particular, it is not syncing more recent adds.  It also occassionally refuses to sync at least one mp3 downloaded from  Amazon.com, giving an unable to sync message with an error code or 50.
    I'm running iTunes version 10.7, and the software (2.04) on myiPod is current.
    I only use the iPod for music.  I have only one playlist.
    Reset and restore did not fix the problem; I'm considering rolling back to a previous version of iTunes.  Are there any other  ideas to consider? 
    Please advise.
    Thanks,
    R

    giving an unable to sync message with an error code or 50
    See this older thread for some possible solutions.
    https://discussions.apple.com/thread/3924425?tstart=0
    iTunes and its sync process with your iPod have been know to choke once the amount of data that needs to be transferred, replaced, or updated, reaches a certain size limit in GBs.
    B-rock

  • Ipod not recognized by itunes or windows.

    Hi there, I have an 80gb Ipod classic which is not recognized by itunes or windows. The "Use iTunes to restore" message appears on my ipod but when I connect it to my pc itunes does not recognize it. Windows shows a message informing me that I need to format the drive but is then unable to do so. Ipod will not go into disk mode either. I have tried reinstalling itunes and using the ipod in a different usb drive. I have also connected it to a mac and a windows pc but nothing happens. I have tried to use the diagnostics mode on the ipod but that will not work either. I am wondering if my ipod's hard drive is corrupted.

    Hello,
    My iPod is not being recognized by iTunes or internet
    explorer. It used to, but not anymore. It just
    dosent show up when I connect it to my computer.
    Also, the "do no disconnect" sign does not appear on
    my iPod when I connect it. It is still able to
    recharge, though.
    have u tried a different usb port?
    I read that I have to restore it. I have tons of
    songs in my iPod that I do NOT want erased! How can
    I back these songs up? I have some songs on my iPod
    that are from another person's computer, so if they
    get erased, the songs are gone forever.
    try this http://www.copypod.net/
    Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

  • I cannot get my ipod touch or iphone to be recognized by Itunes on my mac mini. Only when i download itunes each time afresh, will it show up the first time. Then these devices will not be recognized at other times. Is it because i am not uninstalling it

    I cannot get my ipod touch or iphone to be recognized by Itunes on my mac mini. Only when i download itunes each time afresh, will it show up the first time. Then these devices will not be recognized subsequently. Is it because i am not uninstalling itunes before I download it? Surely this is a basic thing, ie that my devices need to recognize each other?

    After you dry the iPod:
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
    Connect the iPod to a charging source overnight and then try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    If iTunses can see the iPod you can backup the iPod
    iOS: How to back up
    http://support.apple.com/kb/HT1766and copy media from the iPod
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    If iTunes does not see the iPod then its contents are lost

  • TS1363 My sons iPod touch is not recognized by iTunes, or windows.  Is this repairable?

    My sons iPod touch is not recognized by iTunes, or windows.  I have tried a variety of options, even resetting, but still no luck.

    What does the iPod's screen say or do, when you connect it to USB port on the computer?
    The article referenced is for "regular" iPods.  An iPod touch is an iOS computer, so this article would be more appropriate for troubleshooting.
    http://support.apple.com/kb/TS1538
    Be sure to rule out a faulty USB cable as the cause.  Try another cable, or try the cable you have with another device that has a dock connector.
    Also, you should do this test to rule out a problem with the USB port (such as lack of power or USB device conflict).  Shut down (power off) the computer and disconnect all USB devices, including any hub, except for standard keyboard and mouse (if normally used).  If the computer is a laptop, connect its power adapter (so that it's not running on battery power). 
    Then, start up the computer, run iTunes, and connect iPod to a direct USB port on the computer.  If it still does not connect, connect something else to the same USB port to confirm it is working.  Preferably, use something similar, such as a USB flash drive or external drive.

Maybe you are looking for

  • Drop-down List not function in preview mode.

    Hi all, LiveCycle 8.2.1.4029 I have created a drop-down list and populated it with a text However when I preview the form, the drop-down is displayed without the dropdown arrow and the options (text) are not displayed. The drop-down list is the only

  • Printing in snow leopard with hp Color LaserJet CP1215

    I recently bought an iMac, but i've found since i've had it, that there isn't a driver currently available for mac for this HP Color LaserJet CP1215 printer. It's the only printer I have and I love it. I really need to be able to print on it. Could s

  • How do i keep itunes off of my C drive

    so im still going through the problem that itunes wants to be on my C drive and wont go away. i installed it to my D drive, had a problem earlier today with low space on my C and i see that itunes has set itself up in my "my music" folder and its ove

  • Idoc status 03 in SAP but in XI idoc not showing

    Hi Experts, in my SAP to file scenario, idoc is created successfully with status 03, but idoc  is not coming to PI. It is not happening always. some times, idocs are missing. But not able to find any error in PI. Please guide me how to get the missed

  • Working in background or staying focused

    Im trying to create a simple program (mainclass extends Frame) that moves mouse to different parts of the screen when I press a key to reduce physical movement of mouse needed. I was able to do this with Robot, but I'm having problem with focus. When