Ipod classic says when trying to sync, Problems with this drive. Scan the drive and fix it ...what do i have to do?

When trying to sync my ipod classic I get an error message " owners IPO (I)...Problems with this drive..Scan the drive and fix it now.....How am i supposed to scan the drive and fix it?

Hi chiefdon,
If you are having syncing and possibly disk issues with your iPod classic, you may find the steps outlined in the following Troubleshooting Assistant helpful:
Apple Support: iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Regards,
- Brenden

Similar Messages

  • Ipod classic freezes when trying to sync photos

    Hi
    My Ipod classic has started to freeze every time I try to sync with my PC when adding new photos.
    This is something I have done many times before without any problems but as of yesterday, every time I try it just stops dead.
    As I type this message, my ipod screen just says connected and the itunes screen says syncing ipod do not disconnect but it's been like this for 2 hours now with nothing to show for it.
    Syncing of music and videos works fine I hasten to add.
    Not sure if it's relevant but yesterday I updated itunes to 7.7.1.11
    Any suggestions would be greatfully recieved
    Mark

    Hello everyone. I'm new to Apple forums and don't know how to start a new thread! My problem is this: All my photos are on a Seagate External Hard Drive (there are about 3,500 of them) and I want to transfer them to my iPod. I've told iTunes where to find the photos on the EHD, but it just won't load them. I've got the Do not Disconnect message up, and have done for several hours - but no photos. I then tried loading a few hundred photos that I happened to have on the C drive, and that went fine and they loaded no problem. Why can't it load the ones on the EHD? I did it once before and it was fine, so I'm pretty certain I'm not being thick!
    Any advice gratefully received. I don't really want to put all my pics back on the C drive as I haven't got that much room left - hence the need for the EHD!
    Thanks in advance...

  • TS4062 ipod classic issues when trying to sync with itunes

    i have an ipod classic which has always worked great when getting music from itunes, but i bought a new computer and now i can't get it to sync. i also have an ipod touch which works fine. i need help figuring out how to sync with my new computer and the classis. any suggestions?

    Update:
    Any new news on this issue from anyone else?
    I left my iPod plugged into my PowerBook over night and when I woke it was functional. However, downloads from iTunes to the iPod take almost 3x's longer than they used to and there seems to be more errors than I've ever experienced (about 1 out of every 10 interfaces). Sometimes the error is that it can't write to the drive (iPod) and sometimes the error is that it can't mount the iPod. Also when the iPod is plugged in and displayed in iTunes, the "used" and "free" info is incorrect. I completely emptied my iPod and it says that I'm using -2.80 GB (impossible unless I've created a blackhole) and it says that I have 10.49 GB (capacity, under Get Info, is listed at 9.28 - which is were it's always been - it's a gen2 10GB iPod).
    Has anyone tried to format there iPod? Is this possible without harming the drive?
    Well, to sum it up my iPod is working but is having errors and bugs all over the place. If anyone has any new news I'd love to hear it.
    SPECS: iPod 10GB gen2, running 1.5(?), iTunes 6.0.4, PowerBook G4 800, OS 10.4.5
    Thanks

  • HT1386 Switched from ipod to ipod touch. When trying to sync songs get lost. Show in the library and playlist but a message says cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

    Switched from ipod to ipod touch. When trying to sync, songs get lost. Songs show in the library and playlist but get a message that says songs cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

    The ! Next to a song:
    The song can’t be located; it may have been moved or deleted
    To find them try:
    iTunes: Finding lost media and downloads
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1222 my ipod reads error when trying to sync with itunes

    my ipod reads error when trying to sync to my itunes

    Hello, TheHelper1964.
    Thank you for the question.  There could be multiple causes to the errors that you are receiving.  I have included a couple articles that will help you troubleshoot this issue. 
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com. 
    Hope this helps,
    Jason H. 

  • When trying to sync, I get this computer is no longer authorized for purchases on this iphone. I click on store-authorize this computer and get successful and still get the error. I tried deauthorizing and reauthorizing and keep getting this message. Help

    when trying to sync, I get this computer is no longer authorized for purchases on this iphone. I click on store-authorize this computer and get successful and still get the error. I tried deauthorizing and reauthorizing and keep getting this message. Help

    the solution you propose is not helping . are there alternatives ?
    I have Iphone 4  never  had any problem , and withouth changing or modifying , this problem popped up out of the blue ....
    Please HELP

  • HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone.  New entries from my home are not syncing with the phone and vice-versa.  I didn't have any problems with this before until the latest phone update.  Any suggestions?

    I'm having difficulty syncing my iCal between my home computer and iPhone.  New entries from my home are not syncing with the phone and vice-versa.  I didn't have any problems with this before until the latest phone update.  Any suggestions?

    It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
    If you are getting the voice and everything turned on as before, then I am at a loss for words.

  • When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

    When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
    In i-Movie there is no problem with  this film, but the problem begins by exporting to iDVD and making there a project.
    Who can help me, then I cann't find everything about this in any forum?

    Hi
    Can be a problem that get multiplied and visible when iDVD encode for DVD.
    A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
    B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
    C. Does this problem arises what ever encoding quality You use ?
    Yours Bengt W

  • HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

    I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

    Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
    It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

  • Problems with "no color" in the "Fill and Stroke"

    I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
    I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
    After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
    Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

    Have you updated flash to 10.0.2?  Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect?  I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
    Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

  • I've had a Samsung network extender for over a year and it's been great.  About a week ago, my iPhone 5 stopped connecting to it.  I've never had problems with this.  All the lights on the extender are blue, so it seems it's working fine.  Any suggestions

    I've had a Samsung network extender for over a year and it's been great.  About a week ago, my iPhone 5 stopped connecting to it.  I've never had problems with this.  All the lights on the extender are blue, so it seems it's working fine.  Any suggestions?

    Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running? 
    Share details so that we can help!
    Thank you, 
    LenaA_VZW
    Follow us on Twitter @VZWSupport

  • Hi there, I have a problem with my iphone3g. The '*', '0' and '

    Hi there, I have a problem with my iphone3g. The '*', '0' and '#' dont work on the keypad when i try to umlock my phone? When I swipe across the screen its fine, but when I try to enter passcode, it wont let me as the passcode has a '0' in it =/ this happened out of the blue and dont know what could have caused it to happen?? Can anybody help me please?

    Try restarting your phone while you hold down the power AND the sleep button at the same time.
    This defenitly is a software bug and normally there should be this button.

  • I can't install wmpfirefoxplugin at Firefox 4, It show "The installer has encountered an unexpected error installing theis package. This may indicate a problem with this package. The error code is 2755.

    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.

    Although you're getting a different error message, perhaps try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • The installer has encountered an unexpected error installing this package.This may indicate a problem with this package. The error code is 2869

    Hi,
    I am getting error "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869." while installing SAP B1DE.
    Note:
    Downloaded the B1DE from B1DE:SAP Business One Development Environment Tools
    Using Window XP , .Net 2008, SAP B1 8.81 Version
    Company Name, Contact Person, Namespace all were given while installing. All of its length is less than 8
    Any help is appreciated.
    Thanks in advance.
    Parvatha Solai.N

    Hi,
    Try post a comment in B1DE 2.0.1 new version! blog.
    Beni.

Maybe you are looking for