IPod driver not available for Windows Vista ?

Hi,
I have upgraded my PC to Windws Vista. Tne main problem is that the ipod driver can't be found by windows.
How can I have my iPod work on Windows Vista ?
Thanks in advance for any help !

I'm also successfully using Vista and the 5th gen iPod.
Syncing music was no prob, but I got the infamous "error (-50)" and an auto-disconnect the first time I tried to sync video. I did not have disk use enabled, although Vista kept asking me if I wanted to "scan and fix disk errors" when I connected. I remedied the disconnects by:
1) Open iTunes (without iPod connected)
2) plug in iPod
3) checked "enable disk use" and hit "apply"
4) disconnected iPod, then reconnected
5) opened video tab and enabled "sync all"
6) hit "apply"
No problems now, although Vista still wants to check my iPod when I connect.
MR
Lenovo T60p Other OS Vista Ultimate

Similar Messages

Reader XI not available for Windows Vista. Why?

I have just tried to install Reader XI, but I keep being directed to Reader X. Looking at the Technical Specs. Windows Vista is not listed. An over sight? What is going on?

I have Reader XI on my Win 7 office computer. I have Vista on my home computer and tried different links to get to the Reader XI download page, but I too kept getting redirected to the X download page.
When I found the "previous versions" page http://get.adobe.com/reader/otherversions/ I tried inputing different OSs (XP, Vista and 7) and discovered XI is not available for Vista. Obviously the auto-redirect is due to Adobe.com detecting my OS.
I'm not overly concerned. I mean, ver X works fine for what I need it for at home. The only reason I came here (to the forum) was to find out 'why'.

HP G62 -Windows 10 "this version of Windows not available for Windows 10 app"

I'm trying to schedule the Windows 10 upgrade and receive the message "this version of Windows not available for Windows 10 app". I have Win7 SP3, enough memory, everything else it says it requires. the only thing I can't verify is the graphics driver. What might the problem be?

I am using a HP G62a50sg ( APU ATI HD4250 Mobility and ATI HD 5470 Mobility ) . The Windows 10 Update showed that there were no compatabilty problems and I did the upgrade. Everything works fine only the graphics are the problem. I have installed Windows 10 64 bit (Clean) around 5 times and tried all the drivers starting from Windows 7 , Windows 8 ,orginal Notbook drivers von HP and also from AMD ( CC 15.7 Mobility) . Nothing seems to work. Windows 10 reconizes the graphics but doesn`t support the switchable graphic funktion. I think it is an issue with the APU HD4250 Mobility and the Chipset. The desktop has only the 1024 X 768 option and in the graphics manager ( desktop) shows the Graphics as Basic Microsoft Display Driver. I am still trying but I am running out of ideas.

Why skype is not available for windows phone 7.8 e...

Hi Team,
Why skype is not available for windows phone 7.8, earlier it was there in wp 7.8 market place... Please bring it back for WP 7.8

Yet more shoddy treatment of those who bought in to win phone 7. Makes me feel foolish for recommending windows phone to friends and colleagues. "We want everyone to experience the best Skype has to offer" and your way of doing this is to take it away!
My next phone is unlikely to be a win phone 8, and I'll look at alternatives to skype.

Merant Driver is not available for Windows 7 to create data warehouse table

Hi All,
I had installed Database, OBIA, DAC and Informatica in windows 7 64 bit. Installation is successful.
To create data warehouse tables through DAC, we need merant driver. But Merant driver is not available in windows 64bit.
I followed the below procedue to create a merant driver.
"C:\Windows\SysWOW64\odbcad32.exe"
Executed odbcad32.exe, and I found the merant driver in the list, when i try to create DSN, I am getting the following error.
Specified Driver could not be loaded due to system error 193: (Oracle Merant Driver in DAC 10g_Oracle-OH1635326477, c:\orahome\10gR3_1\bifoundation\dac\utilities\DataDirectODBC\seor820.dll).
Can any one please provide me the solution.
Regards,
Kumar

I know the docs say you must use the merant driver however did you try a normal oracle odbc connnection. I am sure i did this in the past.
BTW I hope this is just your laptop and you are playing around. I do'nt think Windows 7 is a supported environment. You should consider a supported platform for production and maybe a virtual machine on your windows 7 machine in development so you can practice the install.
See
Oracle Fusion Middleware Supported System Configurations
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
System Requirements and Supported Platforms for Oracle Business Intelligence Applications 7.9.6.3 http://www.oracle.com/technetwork/middleware/bi/obia7963cert-matrix-395521.xls

Flash lite 3.1 not available for windows device?

Hi! Can anybody help me here?
I've been developing stand alone flash apps for windows mobiles with flash lite 2.1 with no problems!
The company I'm developing for has switched to Vodafone V1520's (Asus p550) running windows mobile 6 Professional.
I've ran flash lite 2.1 with no problems on the device. I've decided to upgrade to 3.1 as it's a fresh install for all 2000 units.
My problem is, When I install the app using Adobe mobile packager, the device comes back with the error " Adobe flash lite is not available for this device"!! I know flash lite 2.1 works.
Is there a way to manually install 3.1 on the device?

You can download the player at the following URL:
http://labs.adobe.com/downloads/distributableplayer.html
Please be aware that you need to use the Mobile Packager to use this version of the runtime for applications. It's also worth pointing out that your device should be compatible, we do not recommend installing it on unsupported devices.
We have a new version of the packager 1.1 here:
http://www.flashmobileblog.com/2009/06/11/adobe-mobile-packager-1-1/
Regards,
Mark
www.flashmobileblog.com

HT5470 How can I get the driver for my new ipod nano 7th gen for windows vista?

Recently purchased a Nano 7 to replace my 3rd generation struggling to connect to my windows vista laptop and Im looking for the driver, can anyone help?

The driver you need to connect your device to Windows is installed during the iTunes installation. So if you already have iTunes installed, verify if it is updated. If it's not, then update, If it is already updated download a new .exe file from the Apple page, and reinstall it:
http://support.apple.com/kb/HT1923
Follow this article before removing iTunes and its components.
Hope this helps!

ICloud available for Windows Vista, but not Snow Leopard???

I have Multipal Macs with the Core Duo chipset that can not run LION and no $$$$ to upgrade hardware right now.
WHY does Windows VISTA get iCloud suport but I who can't upgrade to LION do not?
I understand leaving out Leaopard, but SNOW too?

With the removal of Rosetta in Lion and the requirement for Lion in order to use iCloud Macs are no longer an option for poeple that need to be able to run older applications.
Many places bought Macs because they could run just about anything, Windows, Linux, PPC software, even Classic applications via Sheepshaver.
The big issue is the loss of being able to run PPC applications. Freehand, Pagemaker, Framemaker, Quicken to name just a few applications that will never be ported. People and businesses have huge amounts of documents in these formats. It's not stuff that is used regularly but it is files that need to be accessed and sometimes modified.
All these applications can run on a modern Windows machine as can iCloud but not on a Mac running Lion.
While I'm complaining... I setup a bunch of Macs, iOS devices and some PCs all on iCloud today. The loss of email account syncing meant I had to spend hours setting up email on each machine ( each device had just under a dozen accounts on it) instead of just one machine and having it propagate to all the other devices. Going to be real fun trying to keep email rules in sync on all the Macs.

HP Monitor driver is not available for Windows 10

Hi, When I try to download the driver for my monitor (http://support.hp.com/us-en/drivers/selfservice/HP-25-inch-Flat-Panel-Monitor-series/3757979/model/4332278#Z7_3054ICK0KGTE30AQO5O3KA30R1), there is no option for Windows 10. What can I do?

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are attempting to install drivers for your HP monitor, but there are no drivers to install for Windows 10. I would be happy to help you! To connect your monitor without downloading drivers from the website, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? This should help to install the necessary drivers for your system. I hope this helps! Best Regards

IPod will not install on Windows Vista, iTunes is fine?

Hello,
I am running Windows Vista Ultimate on 2 computers. One computer connects to my 60GB iPod video just fine, while the other looks for drivers and then fails to find any. I get a window that pops up saying "Insert the disc that came with your iPod" after Windows searches for drivers. Because of this, the iPod does not appear in iTunes, nor does it appear in My Computer. I have tried performing a soft reset on the iPod (Menu/Center combo) which did not work. I have also tried reinstalling iTunes to no avail. This is a brand new Windows installation and I just can't figure out why it won't work. iTunes seems to work just fine in all other respects.
Thanks,
Brian
Message was edited by: kstrike155

I found these steps here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1286482&SiteID=1&pageid=4
Scroll down to the quote from WickedMX.
Basically, C:\Windows\System32\Driverstore\Repository and look for a folder that starts with usbstor. You will probably have two different versions. Open the folder that is the newest version and then copy the files usbstor.inf and usbstor.PNF. Copy them to the C:\Windows\INF folder. Try installing your device(s) again and it should work like a charm!
Brian

IPod is not recognized by Windows Vista - possible solution

During the past couple of weeks that I faced this problem I found out that a lot of people had the same question as I did.
Here is a possible solution.
I have HP Pavilion laptop with Windows Vista. After I connected my new iPod – it didn’t show up in My Computer as a new device and in Device Manager it was listed in “Other devices” with a question mark next to it. I already had iTunes installed – it didn’t show up in iTunes. On the attempt to reinstall the driver I had a message that the driver was found but an error occurred while installing it.
Here is what I did:
1. Install iTunes (it has iPod driver for Vista in it).
2. Turn on iPod and connect it to computer.
3. Restart computer with iPod turned on and connected to computer.
4. On the start up the computer will begin automatically installing the driver and the message will appear in the corner that new device is being installed.
5. After it has been installed – check My Computer – you should see it listed there.
6. Run iTunes and configure iPod.
iTunes might run a little bit slow when configuring iPod for the first time.
Good luck.

if only this fix worked for windows xp or even 2000 (at my job)
insane, but it IS a driver/usb problem i now know, at least i've gotten that far.

Ipod touch not recognised on windows vista PC

I have spent hours trying to get my sons new touch to be recognised on windows vista PC
I have uninstalled / reinstalled
The USB driver is there, but no sign of the device and hence not in I tunes
I office laptop, windows 2000 recognises instantly
What can I do, this looks like a security issue?
All previous ipods load on vista with same port / cable with no issues
Please can anyone help an ageing parent!

Welcome to the discussions,
Did you check if Apple Mobile Device Service is installed? http://support.apple.com/kb/TS1567
More suggestions here: http://support.apple.com/kb/HT1852

My 5th Generation iPod will not sync under Windows Vista

Wow.. I finally got registered on this forum, took ages lol.
Well I've got the latest version of the iTunes software and I'm using Windows Vista Home Premium.
When I connect my iPod, it detects ok and then iTunes starts to sync it.. after about five seconds or so I get an error stating I do not have sufficient privelages to update the "My Music" folder, and thus my iPod will not update. Immediately after this error I check device manager, and a "USB Mass Storage Device" is detected with an error state (a yellow exclamation mark next to it). I can delete this from device manager, re-connect my iPod and it will do exactly the same all over again.
Can anyone help?

I've had it working in the past, thats what is odd.
It just refuses to update saying I don't have the necessary privelages.
Not sure when the next version of iTunes will be released, hope its soon.

Ipod touch not recognized in windows vista.

When i connect it, it doesnt charge, open itunes, and i can't even view the files on my computer. Ive tried many of the similar discussions in itunes support but it still has the same problem. I've tried reintalling itunes, updating ipod, restarting it, and so on... can anyone help? thank you

i tried to update the driver like it said in the link u sent me(i have windows vista) but when i was going to update it it said "windows found driver software from your device but encountered an error while attemting to install it(ive tried a few times with the same result) This device cannot start.(Code 10)" and after this i was forced to close the program

64 bit version of Ultranav driver not available for download

Using either Update Retriever or System Update, version 7.202.1616.206 of the ThinkPad UltraNav Driver 2 (Alps) 64 bit is missing from the System Update catalogue. Package ID: 6EGY02WW is not presented. Only the 32 bit version (Package ID: 6EGX02WW) is available.
           It can be downloaded and manually installed from the driver matrix, but you would have to realize that there was a more recent version available that System Update had not installed, and go looking for it. This update applies to machine types:
           -        R61 (Machine types: 8914, 8918, 8919, 8920, 8927, 8928, 8929, 8930, 8932, 8933, 8934, 8935, 8936, 8937)
           -        R61i (Machine types: 8918, 8932)
           -        R500
           -        X300, X301
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's
Solved!
Go to Solution.

Hi Stormycloud,
The problem is resolved. Today, on both of my R500 machines, Update Retriever informed me that the 64 bit version of the Ultranav utility was available for download. On both of my machines I then downloaded the driver. I was then able to use System Update to install the driver. Thank-you. Case closed.
Regards,
Chuck
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

IPod driver not available for Windows Vista ?

Similar Messages

Maybe you are looking for