IPod is charging and recognised by windows, but not recognised by iTunes.

There was an error message but stupidly I did not read it, and it won't come up again. I've tried restarting my laptop, re-installing iTunes, restarting my iPod and all sorts.
The reason (I think) it stopped working was because I was trying to copy music from my iPod to my iTunes, and windows was not recognising it, so a friend suggested deleting and re installing the driver, which was successful. But when I then went on to iTunes, it came up with the error message saying something about the iPod no longer working with iTunes or something, and now won't recognise the iPod no matter what I seem to try.
Is there anything I can do without deleting all the music and resetting the iPod? Because the whole reason I was trying to do this was to back up the music so I could update to ios 5.1 or whatever it is, without losing all my music which I don't have on iTunes as it's a new laptop.
Thank you.
Ben x

Try here:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
It will not delete your library.

Similar Messages

  • What do I do when I plug in my iPod to charge and it says "USB Device not recognized"?

    What do I do when I plug in my iPod to charge and it says "USB Device not recognized"?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • My Ipod Shuffle 3rd Gen appears in Windows but not in Itunes

    It all Started going wrong when i converted all my music to AAC versions and deleted the old versions so it would work in my car. Since then it won't connect to Itunes but shows up in WIndows. It has taken all of my music off but still charges.
    ...Help

    Have you worked through all the suggestions in this Apple support document?
    iPod: Appears in Windows but not in iTunes
    B-rock

  • My iPod Nano 2G shows up in windows but not iTunes I tried the 5Rs

    My iPod Nano( I have 2 neither work) 2G shows up in windows but not iTunes, and does not sync I tried the 5Rs and turning off antivirus/firewall. I have the newest itunes, and have used all the apple troubleshooting docs, to no avail. Help

    Check out this link:
    iPod Appears in Windows but not in iTunes
    I hope this helps!

  • IPod recognised by windows, but not appearing in iTunes

    My sister recently bought an iPod nano so we have both been using the same computer, different user areas for our iTunes. However, there is some conflict between them somehow as now the iPod is not appearing in iTunes but is appearing as a hard drive.
    My iPods an old 20gb one so I'm guessing that's got something to do with it, the iPod software doesn't work for both of them.
    I just got a laptop today so I'm copying my music over using the iPod as a hard drive so it's not such a problem for me but I want to sort it out for my sister. How can we make the iPod appear in iTunes?
      Windows XP  

    Change the drive letter to something higher, like M.

  • 3rd Gen 40GB iPod click-wheel is seen by windows, but not Mac

    I just dusted off my old iPod after nearly a year of no use and coulfn't get it to be seen on my MacBook Air with iTunes 7.7. I tried it on my homebuilt PC running Win XP with iTunes 7.7 and it mounted just fine. I did a software update on it, plugged it in overnight to give it a full charge, then tried it on the Mac again. Still no dice. No crash or hang, just as if it didn't exist. But it (the Mac & iTunes)see my wife's and my iPhone just fine. I double-checked and it still shows up and works normally on the PC. I don't want to do a reset if I can avoid, as I have some music on the iPod that isn't on the Mac. It is on the PC, but, it's a hassle to get it across.

    I have a similar problem. I have not used my iPod in a few years. I recently bought a mac. The iPod syncs fine on the windows, but is completely unrecognized by my MacBook Air. I had to buy a USB connector because my iPod had only a firewire cable. Perhaps that's the issue? Disk Utility doe not recognize it. ITunes does not recognize it. In disk mode the screen still reads "OK to disconnect" after I plug it in. Any ideas? (I followed the Rs on the Windows where it's working fine...)
    I am abandoning my PC altogether and I am becoming addicted to podcasts. Getting this to work with my MacBook Air would satisfy my new addiction.
    Thanks,
    T

  • Ipod recognized by windows, but not recognized on itunes

    Just got a new nano today and tried it on itunes. The nano is recognized on My Computer, but not on itunes. Tried switching USB drives, running restarts, updates to the newest itunes version, restores on the ipod, even switching connecting cables, but nothing worked. Also, when I try to click on the f: drive in My computer, the entire system goes into non-responding mode. Lastly, when new ipod is plugged in, we get a pop up with a flashlight searching and the words "autoplay", like it's searching for it. All of our other ipods work great on the same computer, just not the new one. We're going to return the new one and try again with another nano.

    Re: Autoplay
    Plug in the iPod.
    Double click My Computer.
    Right click on the iPod and select Properties.
    Select the Autoplay tab.
    In the drop down box, select "Mixed Content".
    Choose "Select an action to perform"
    and also select "Take no action".
    Re: Not visible in iTunes
    Apparently there can be numerous reason for this, e.g.
    [Faulty iTunes installation]
    http://docs.info.apple.com/article.html?artnum=93716
    [XP confusing Ipod with network drives]
    http://docs.info.apple.com/article.html?artnum=93499
    As a last resort you could try and re-format the Ipod manually and then Restore it using the Ipod Updater. I followed this advice myself when installing the Ipod for the first time, when the Ipod would not be recognized by either the Ipod Updater and hence iTunes.
    The thread below gives details as to how proceed with formatting the Ipod.
    http://discussions.apple.com/thread.jspa?threadID=460669

  • My ipod touch charges when connected to computer but doesnt show in iTunes or My Computer? Please Help

    My ipod touch 4th generation was just working fine. now it wont show up in itunes or computer. i have literally tried everything known to man. i unistalled then reinstalled itunes, i tried each USB port on my laptop, i restored my ipod to its original settings, i tried 2 different cords and each time nothing changed. my ipod charges when its connected to itunes so i have no idea what it could be. somebody please help.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Self-made .aif and .mp3 Audio files play in Library and Audio Inspector windows but not in the Timeline, when dragged into the timeline under video clip already there. FCPX 10.1.4, OS 10.10.4, iMac (late 2012), audio files are recordings of my own li

    Audio clips play in Library and Audio Inspector, but not in Timeline

    dougfromwanamassa wrote:
    …but not in Timeline
    Post a screenshot of your timeline… there're several ways to mute an audio track ...

  • IPod recognized as disk drive by WinXP but not seen in iTunes or iUpdater

    HELP!!
    A few short weeks ago I was ecstatic when I received my new iPod video as a Christmas gift. Imagine my dismay as I have been trying to get the darn thing to connect to iTunes ever since!
    I have gone through the Apple website troubleshooting, have spent HOURS with a MAC "genius" and we still can't figure out what's going on.
    The device has been restored and iTunes/Updater have been removed and re-installed NUMEROUS times but still can't get my 30G iPod Video to register in iTunes. Apple swears it is my laptop. I've removed everything and re-installed from scratch so I find it hard to believe that it is just my PC.
    When I plug it into my USB I get the "Do Not Disconnect" icon that just keeps flashing (guess I should be happy its not freezing anymore!). I can see it as my "E" (Removable Disk) Drive but can't find it with iTunes or iPod Updater (Oct05 and Nov05 versions). It does appear when connected to an Apple store MAC or the Apple store's PC...so maybe it is mine.....?
    Any advice?
    Thanks!
    Toshiba Laptop - P4   Windows XP  

    Maybe you solved this or not but I have a suggestion. If you have a PCMCIA slot try adding a usb 2.0 pcmcia card. I was having a world of troubles that have included one already returned 5G 60GB. It was rendered inoperative by a failed restore process. I assumed it was a defective ipod.
    Receiving the new one last night it was showing similar behavior to the one I had to replace. I thought my laptop might be a factor. I was already using a compUSA usb 2/FW card with the ipod but after searching I found a post that warned that card is trouble. I just bought a HP USB 2 pcmcia card (US$39) and about 8 gigs of movies was just gulped down by my ipod in one sitting. With the compUSA card it would cough and choke on one movie sometimes.
    Sorry for your troubles. Good luck.
    dell inspiron lappy   Windows XP Pro   HP pcmcia USB 2.0 adapter

  • New IPhone 4 charger charges when plugged into computer but not found in ITunes

    I recently bought a Reiko Iphone 4 charger and when I plugged it into my computer it charges the phone but is not found on itunes or IPhoto..how can I fix this?

    Hey tke6191!
    Here is an article that will help you troubleshoot this issue with iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • My PC is not recognizing  iPod gen4/5 and trying to upload CDs not sold by iTunes onto the iPod.

    My PC is not recognizing one of our 2 iPod gen4/5 and I'm trying to upload CDs not sold by iTunes onto the iPod. How do I get this done. Thanks for your help

    See these for Windows.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    And these for Mac.
    iPod doesn't appear in iTunes or on the Mac desktop.
    iPod does not appear in iPod Updater or iTunes in Mac OS X.
    iPod appears on the Mac OS X desktop but not in iTunes.
    Try to restore it in disk mode.
    Putting iPod into disk mode.

  • My iPod will charge through the wall outlet, but not PC. PC won't recognize it when plugged in.

    I bought a used iPod nano that is giving me some grief. It works fine other than the battery not holding a charge. I have ordered a battery to replace the old one and am hoping this might be the problem.  Anyway I am having problems getting my PC to recognize it when I plug it in. I keep getting errors from windows that the PNP devices is having problems. I have tried all the troubleshooting tips on the Internet and still can't get it to recognize the iPod. I have 3 other 4th generation iPods that I have no problems with. Could the battery be the problem? I have changed cords to see if that was the problem, I have tried different computers and it gives me the same problem. Just curious if anyone knows what the deal might be.

    The following links may be helpful.
    http://docs.info.apple.com/article.html?artnum=61711
    http://docs.info.apple.com/article.html?artnum=93716

  • IPod touch stuck on USB connect screen but not recognized by iTunes

    I downloaded the update for my iPod via iTunes but when the update attempted to install on the iPod, I received a message that the update failed. Now, my iPod is stuck on the USB connect screen (with the image of a cord below an arrow pointing to the iTunes logo). Every other thread says to connect to iTunes and attempt to reset the device (off and home button for several seconds) so I can restore it through iTunes, but even if I do that, it fails to connect to iTunes. Last time I had problems connecting to iTunes I downloaded the update through the iPod itself but seeing as I can't get off the USB connect screen, downloading it from the iPod is impossible. How can I get my iPod working again? Either getting it off the frozen screen so I can download the update, or getting my computer to recognize it so I can restore? Last time it wouldn't connect to iTunes (when it wasn't frozen) the computer still recognized it but now it does not. (I'm on a Windows 8 laptop)

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

Maybe you are looking for

  • I dont see 'documents & data' in settings

    Why cant i see 'documents & data' in the settings in iPhone? Im trying to backup whatsapp but i have to turn on documents & data first but i don't see it in settings/iCloud

  • Run RFEBKA00 as background job

    Hello, I want to run program RFEBKA00 as background job. On selection screen, there is parameter "Execute as background job", but even if I tick this checkbox, report is ran on foreground. How can I run this program as background job? Thanks&regards,

  • Purchase Order in Held status

    Hi - We are using extended classic scenario - PO created both in SRM and backend ECC. We configured one level approval for shooping cart. Shopping cart is getting created and approved by the next level approver. However after the shopping cart is app

  • Xslt: calling custom Service Application Proxy from xslt

    Hi, Basically, i have creted my custom service application and i wrote webpart to consume it. I have a requirement, to add a button in the SharePoint-Blog XSLTListViewWebPart located in the ~/blog/post/post.aspx page. In this page, they have 2 XSLTLi

  • Building a form on a form's response?

    Anyone remember the really old days of paper forms when there would be a box, often at the bottom of the form, that would be marked "Office use only"? This was a way where after someone, let's say a customer, had filed out a form, then the office sta