IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
Thanks,
Global_mongrel

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Similar Messages

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Mac ipod nano 3rd gen - to windows xp

    Hey every body,
    I currently own a ipod nano 3rd gen. I however have mbp at home(where the nano is registerd) Till yesterday i saved a file on my nano. Tried opening the file today on the pc. However it does not come up. It says that the nano is not formatted. Anyone know how i can access this file?

    As far as I know you can't. A PC can't read a Mac-formatted iPod is the problem.
    If you have to use the Nano on both OS, you will have to have the Nano in PC format. A Mac can read a PC formatted iPod, but not the other way around, as I said above.
    Message was edited by: StarDeb55

  • Have you been having problems with ipod nano 3rd gen?

    Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

    the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

  • IPod Nano 3rd Gen Issues: would be grateful for any help

    Dear all,
    I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
    Here's what's happening.
    iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
    Connect, sync, no worries.
    Update iPod Nano software to 1.0.2.
    iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
    It is not recognised in iTunes like that.
    Any help?
    A hopeful Dan

    Hi,
    Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
    Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

    The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
    Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
    I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
    NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
    Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
    Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Cannot find iPod nano 3rd gen in iTunes

    My iPod nano 3rd gen is recognized by Finder in mac OS but not shown in iTunes for sync

    Howdy Andrea.Betti,
    Thanks for using the Apple Support Communities.
    In order to resolve this issue where you're not seeing the iPod in iTunes, please follow the steps in the article below.
    If you don't see your connected device in iTunes for Mac - Apple Support
    Have a good one,
    Alex H.

  • IPod Nano 3rd Gen won't play AIFF files from Logic Pro 9

    Hi, so I've bounced a few tracks I was working on in Logic pro 9 as AIFF files, imported them into iTunes and then synced them down to both an iPod Touch 2nd gen and this iPod Nano 3rd Gen. The tracks play fine on the iPod Touch, but on the Nano, when I try to play a track, it shoes the "player" screen for a second, but it always bounces back to the track listing.
    According to the iPod Nano 3rd gen spec sheet, it does support AIFF files:
    http://support.apple.com/kb/SP14
    Any idea as to why this is happening?
    Also, I'm on Mac OS X 10.6.4, iTunes 9.2 and I reset the iPod nano just before starting this whole project.
    I'd like to keep the tracks in AIFF if possible...

    Greetings WonderfulT1,
    If you are having an issue with being unable to start your iPod nano when it is not connected to the computer, I would suggest that you troubleshoot using the steps on this page - 
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Why can I not sync my iPod Nano 3rd Gen to my iTunes 9.1.1?

    My daughter mistakenly downloaded the latest iTunes version which does not work with my older iPod Nano 3rd gen.  Before all this happened I was running version 9.1.1 which was working beautifully.  After uninstalling the updated version and reinstalling the 9.1.1 version, I cannot restore nor sync my music to the iPod Nano.  I would just be happy having things the way they were previously.  Any tips???  Thanks.

    Go to the Apple icon in the upper left corner and select 'About this Mac' - it will show you which version of OSX you are using.
    Read this KB from Apple - http://support.apple.com/kb/ph12113
    MJ

  • How long will a 5 year old iPod Nano 3rd gen's battery last?

    Hello,
    I am thinking about buying a used mint green iPod Nano 3rd gen off of ebay. I was wondering how long the battery would last?
    Thanks,
    themiz

    i found this from another user and it worked for me!
    I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all. Mine is also refurbished.
    I called Support and the automated phone person gave me these steps:
    1. Plug the iPod into the computer
    2. Set it down on a flat surface
    3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
    It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

  • My iPod nano 3rd gen is stuck in a restore loop.

    My iPod nano 3rd gen is stuck in a restore loop.  I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine.  I know that this is not a windows driver issue since I use a mac.  In any case such an issue should have been resolved when I wiped the pod.  I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition.  I have no idea whats wrong with it so any help or suggestions would be appreciated.

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

  • Vertical line on my ipod nano 3rd gen?

    Yesterday my ipod was fine, last night i added some songs to it and then after when I was listening to music i noticed a very tiny vertical line up top above the title of the song playing.. it didn't look too out of place so i thought maybe i'd just never noticed it before.. but then this morning when i get up theres a line from top to bottom.. and i can't find support or topics about this (on an ipod nano 3rd gen) anywhere.. so far its playing the music but.. it doesn't seem right so i'm not sure if anyone else has had this? or what i should do? please help!

    http://www.apple.com/support/ipod/five_rs/nano3gen/#

  • If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

    if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
    They are not listed as devices on the itunes store account...

    Hi BradSLane,
    Thanks for using Apple Support Communities.  This article has one method to find your serial number:
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    Go to My Support Profile*.
    Sign in with your Apple ID.
    View your purchases in "My Products".
    * Currently available only in certain languages.
    Note: If you need help remembering your Apple ID(s), go here.
    Take care,
    - Ari

Maybe you are looking for