IPod nano 3rd gen turnes off and on by itself

I have a problem: my iPod nano 3rd generation turns off and on by itself every 5-7 seconds.
How can I solve this problem?

Is there a case around this iPod? It might be pushing on the touch wheel. Does it happen when you flick the lock switch? If so it seems like a restore is in order
Try the 5 r's http://www.apple.com/support/ipod/five_rs/nano3gen/

Similar Messages

  • My Ipod nano 7th generation turned off and won't turn back on. what should I do?

    my Ipod nano 7th generation turned off and won't turn back on. what should I do?

    If you have done the reset and nothing appears and you are sure it still has a charge and it doesn't turn on, you may request for a replacement if it still covered by the warranty. Cheers!

  • The volume in my ipod nano 3rd gen goes up and down on its own

    I notice lately my nano 3rd gen adjust its volume on its own!  Also the clicky wheel doesn't work some of the time.
    I've tried resetting it and syncing it with my pc but it did not help.
    Should I bring this in the store to fix???

    Upeace, it's so long ago I can't remember now… But I do know that my newer MBP's volume can be affected by someone tinkering with the Apple TV remote. Is that a possibility? If so you can turn this off in System Preferences. It's not at all easy to find though—you have to go into 'Security Privacy > Firewall > Advanced' and then tick 'Disable remote control infrared receiver'.

  • My ipod nano 3g suddenly turns off and wont turn back on .

    After a while my ipod turns off and wont turn back on the charge on the battery marks at least half of the power, it happends when im listening to music after a few minutes i connected it and turned back on instantly with the apple logo so i disconected it, and tried again and happened again.. im using another headphones .   is there any way to check battery life ?  How can i solve this?

    What have you tried so far in terms of troubleshooting?  If nothing else, work through each of the 5 R's of troubleshooting for your iPod to rule out the possibility of any sort of software error/glitch or data corruption.
    http://www.apple.com/support/ipod/five_rs/
    Otherwise, you have a hardware issue, meaning you'll need to either take or send your iPod in for service/replacement either via Apple or a third party service.
    B-rock

  • My iPod nano (3rd generation) shut off and wont turn back on?

    I was putting new music on my Ipod, and one day after working perfectly fine, i got to a song my friend got for me. After lintening to it for about thirty seconds, my ipod shut off. I tried holding down the home button, but nothing hapened.  I also tried charging it. The computer will not recognize it either. Is there something i can do to make it work, or do i have to bringit in to an apple store?

    What have you tried so far in terms of troubleshooting?  If nothing else, work through each of the 5 R's of troubleshooting for your iPod to rule out the possibility of any sort of software error/glitch or data corruption.
    http://www.apple.com/support/ipod/five_rs/
    Otherwise, you have a hardware issue, meaning you'll need to either take or send your iPod in for service/replacement either via Apple or a third party service.
    B-rock

  • My Ipod Touch turns off and on by itself.

    I have had my ipod touch for a year almost. It a first generation. It works fine, but starting last night. My Ipod touch started to turn off and on by itself. Ive had no trouble with this Ipod.the software is up to date, very well maintained. Whats going on?

    You should take it in to the apple store and have someone from the Genius bar help you. Hopefully your warranty is still good, cuz you could get it replaced.

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I downloaded a recommended update and since then my ipod touch (3rd gen) is frozen and wont turn on (1604 error)

    I downloaded a recommended update and since then my ipod touch (3rd gen) is frozen and will not turn on. I try restoring factory settings but the process terminates with a 1604 error. I have researched this problem on the net and think i have tried everything, but still no joy. I have tried removing all apple and itunes software and reinstalling, updating the apple drivers - nothing has worked. I am using itunes 10.3 on my pc, windows xp.
    If anyone can help me i would be extremely grateful - I am off on holiday on thursday and would love to have my ipod with me!
    Many thanks in advance.
    Craig.

    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Above is from:
    http://support.apple.com/kb/TS3694

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • Rented movies and Ipod nano 3rd gen.

    I believe the ipod nano 3rd gen allows for rented movies.
    so I should be able to sync my rented movies to my ipod easily.
    However, when I go to the movies section under sync, the rented movies tab does not show? Something I'm doing wrong? (I believe before I saw the rented movies tab before, it stopped showing though) or does apple just suck?

    Yes, the 3rd gen Nano supports rented movies. There is no separete tab for rented movies. They show up in the regular Movies tab. You can't sync them, though, only transfer them from one device to another as you can only have them on one device at a time per terms of rental.
    With your Nano connected, click on the movies tab. You should see two boxes at the top. In the left hand box should be all of the rental movies you have on your computer. There should be a button between the two boxes that says, I believe, "Transfer" (don't have any rental movies so I can't say absolutely). Select the movie you want to move to your Nano and press transfer.
    And by the way, your last comment almost resulted in me not even bothering to try to answer your question. Rudeness really has no place here (or anywhere, in my opinion). Everyone here is a fellow user, a volunteer.
    Best of luck.

  • Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows.  Have latest itunes, but nothing syncs.  Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

    ipod nano 3rd gen unit windows xp.   Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows.  Have latest itunes, but nothing syncs.  Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

    Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
    B-rock

  • How long will a 5 year old iPod Nano 3rd gen's battery last?

    Hello,
    I am thinking about buying a used mint green iPod Nano 3rd gen off of ebay. I was wondering how long the battery would last?
    Thanks,
    themiz

    i found this from another user and it worked for me!
    I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all. Mine is also refurbished.
    I called Support and the automated phone person gave me these steps:
    1. Plug the iPod into the computer
    2. Set it down on a flat surface
    3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
    It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

  • Recording onto iPod nano 3rd Gen?

    I was recently flipping through folders on my iPod, and I came across a folder that said "recordings". Does this mean my iPod nano 3rd Gen is capable of recording directly?
    Any help appreciated =]

    Thank you for the reply, however, I'm using APPLE; 10.5..... op system.  I have been using this ipod with this APPLE comp for  a few years--- I read somewhere that the mobile device could be auto turned off somehow.  If I DO follow the directions for the uninstall..do I lose all my songs, etc when I put the itune.app in the trash and re-install?

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

Maybe you are looking for

  • How to hide tabstrip Control at runtime?

    hi to all. i used a tabstrip control in my screen. i want to make my tabstrip visible or invisible based on t-code for my screen. it will be total based on t-code. if i will enter t-code zins11 it will show me tabstrip for screen 100. if i will enter

  • I keep getting an error that "iCloud encountered an error while trying to connect to the server". What's up?

    I've been getting an error most of the day that says "iCloud encountered an error while trying to connect to the server" on my pc. Also, anything I update on either iPad or iPhone does not update on the other device. What's up?

  • No screensaver and monitor sleep mode

    Hello guys, I have the following problem with my Mac Pro (Early 08) and MacBook Pro 2.33 GHz. Both are Mac OS X 10.5.4. I have installed the latest Security Update 2008-005. After installation both computers have similar problem with Screensaver and

  • Using Cursor attributes in Pro*C application (.pc file)

    hi, Does anyone know, what is hte equivalent of following PLSQL code in PRO*C?? declare cursor c1 as select * from emp; begin if c1%isopen then close c1; else open c1; end; I m able to get the cursor working succefully as such. But before my procedur

  • EPM Connector with Business Objects 4.0

    Hi experts, Has anyone been able to install the EPM connector on BPC MS7.5 to use with Business Objects 4.0? The instructions in the BPC manuals all seem to refer to Business Objects XI and don't work for us. I was not able to find any updated docume