IPod Nano(3rdgen) No drivers found

I am going to start off with, I'm having a fit.. My Roomie told me that his ipod touch wasn't getting recognized at all by the PC, so i started seeing what I could come up with. I did absolutely everything that my time doing tech support had given me but I can't figure this one out. I have unplugged and replugged their ipod touch, switched USB ports with my mouse(mouse works fine when in both ports), reset ipod, reinstalled itunes, enabled/disabled/uninstalled USB driver, used my own Nano. Both the touch and the nano don't say (Do Not Disconnect)and when either of them are connected they show up as "Unknown Driver" in Device manager and i get a bubble, the bottom left of my screen that says "USB device attached has malfunctioned and windows does not recognize it. For assistance click this message." When I click on it I get "Device Not recognized".
When I updated or reinstalled the drivers I got the HW update wizard telling me that able to update the driver because it said it couldn't find a better match. I uninstalled the driver and then I plugged the ipod back in and it found new hardware and installed components but alas it says the same old thing "USB device attached has malfunctioned and windows does not recognize it. For assistance click this message."
Please If you have an Idea it would really help my sanity!

Hi, again
I have managed to resolve the issue. After getting nowhere in the apple pages, I googled for a while, and eventually found a reference to iPodDriver.kext. This file was missing from my mac. So, after googling a bit more I found a number of ways to get the file back, and eventually found it. Now after several reboots, the ipod is connected and doing ipod things.
If you have the same problem, google for iPodDriver.kext, but beware, this file is not easy to find, depending on the version of iTunes installer you have.
Good Luck.

Similar Messages

  • IPod nano 7th gen not found in iTunes/"no disc in drive" Windows computer.

    I bought a brand new iPod nano 7th generation yesterday. When I plugged it into my Windows computer it began set up then stopped and a pop up appeared ''no disc in drive'' directly after that the next pop up read ''iPod cannot sync because it was not found''. My iPod is charging the entire time until that second pop up appears and then my iTunes acts as if the device was unplugged from the computer, it stops charging and at the top of my iTunes screen it says "OK to disconnect". I tried putting my iPod into "disk mode" but the same two pop ups still come up and the same thing happens. And even though iTunes recognizes the iPod as being unplugged even before it is, even after I do unplug it my computer still thinks it's attached, down in my tool bar it's still there waiting to be disconnected. As soon as iTunes begins starting up with my iPod it says there's no disc and then that the iPod can't be found even though it's still plugged in. I can't get any music on it let alone get my computer to recognize it for longer than 30 seconds. I really don't want to return it because my iPhone4 is full and can't fit any more music so I needed this iPod.

    Hello Abbey,
    I would recommend the steps in this article named iOS: Device not recognized in iTunes for Windows found here http://support.apple.com/kb/TS1538. While the title of the article describes a symptom a bit different from yours, I feel the troubleshooting is still relevant.
    If that does not resolve the issue, then I would suggest this article to help troubleshoot the USB connection.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/ts1286
    And lastly, resetting it just may do the trick.
    How to reset an iPod nano (7th generation)
    Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    From: How to reset iPod
              http://support.apple.com/kb/ht1320
    Take care,
    Sterling

  • IPod nano could not be found

    I have bought my daughter an iPod Nano for Christmas and thought I should put some music on it for her. However, when I connect the iPod it fires up iTunes as expected, but whenever I try to update it I get the message: "The settings were not saved for the iPod ... because it could not be found."
    I can find it - it is at the end of the USB cable, the other end of which is plugged into the mac mini.
    This message only has an OK button. There is no button that says "No, this is NOT OK!"
    On the Summary page for the iPod, it also shows an icon of a regular iPod, not a nano, and the Software Version and Serial Number are both marked as n/a.
    The update and restore buttons are also disabled.
    I get the same problems with my old Shuffle as well.
    I have tried updating iTunes, but this has done nothing to help.
    If anyone can help with this I would be most grateful.
    MacMini PowerPC   Mac OS X (10.4.6)  

    Hi, again
    I have managed to resolve the issue. After getting nowhere in the apple pages, I googled for a while, and eventually found a reference to iPodDriver.kext. This file was missing from my mac. So, after googling a bit more I found a number of ways to get the file back, and eventually found it. Now after several reboots, the ipod is connected and doing ipod things.
    If you have the same problem, google for iPodDriver.kext, but beware, this file is not easy to find, depending on the version of iTunes installer you have.
    Good Luck.

  • Ipod nano charges but isnt found on computer or itunes

    i recently purchased a ipod nano second generation (product)RED and it worked great but now (two months later) the center button dosent always work and when i plug it in to a windows compaq presario laptop it charges but isnt even on the computer or itunes .
    i tried using different cords and even on a different computer please help me :[
    compaq presario   Windows XP   laptop

    i recently purchased a ipod nano second generation
    (product)RED and it worked great but now (two months
    later) the center button dosent always work and when
    i plug it in to a windows compaq presario laptop it
    charges but isnt even on the computer or itunes .
    i tried using different cords and even on a different
    computer please help me :[
    compaq presario   Windows XP
      laptop
    i got it t work i reseted it while it was plUGED IN OK thx n e waY

  • TS3716 Connecting iPod nano 3rdGen to ipad air, is this possible as I no longer have a PC to manage iTunes library?

    Hello I no longer have access to a PC for iTunes library but have just purchased an ipad air and wondered if it's possible to use the air to manage my iTunes library for my iPod nano 3rd gen ?
    Thanks

    i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
    once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

  • Please how do I fix this on my ipod nano "required file not found"

    I had my computer fixed and so I had redownload itunes again.All my my music got saved to a folder as a backup.Well when I downloaded it,I put all the songs on itunes and tried to sync my ipod to add new music.But,it kept saying it won't sync since required folder is not found.I've looked everywhere online to see what to do.I tried uninstalling everything and again multiple times.The same error kept popping up.I switched to Manually manage music to see if it fixed the problem but no.A different error "the song....could be copied error ..." I switched back to sync.Nothing worked!!I tried restoring but it took so long as if it couldn't work it out.Previously I had this same computer fixed and when I downloaded again itunes it worked perfectly fine until now.Can somebody please guide me what to do?I cannot afford a new one.

    vane7 wrote:
    …tried restoring but it took so long as if it couldn't work it out…
    How many songs do you have, and how long did you give it? I have my 16gb Nano almost to capacity, and it took between 45 minutes to an hour or so the last time I restored the whole thing.

  • Interfacing IPOD Nano 3rdGen to other items

    I have no problems connecting my Nano 3Gen to my computer with iTunes and it syncs perfectly fine but I've tried to connect it to other equipment like a brand new clock radio with an iPod dock and to an exercise equipment that had a iPod interface cable. When initially connected the Nano will wake up (screen turns on), it will charge while connected, but the item I'm connecting to will not recognize the Nano to function with it.
    I can't find any setting that might be preventing this. Does anyone know any reason why the Nano will not interface with other equipment?
    Thanks,

    How you delete content from your iPod depends how you have it set to update:
    If you are updating automatically (syncing) all songs and playlists then delete the files from the iTunes library. In the iTunes Library highlight the file and press the delete key on your keyboard. If you're updating the iPod from a selected playlist delete the song from the playlist and it will remain in the library. Next time you connect they will deleted automatically from your iPod.
    If you are updating manually, connect your iPod and when it shows in the iTunes 7 source list click on the chevron (the little triangle) to the left of the iPod icon This will display the various icons for the iPod itself, Music, Movies, TV Shows and Playlists. Click on Music and you'll see the usual song list. Find the files on your iPod that you want to remove, highlight them and delete directly as above by pressing the delete key on your keyboard.
    To select multiple items such as all the songs in an album, click on the first track in the list hold down the shift key and click on the last track to highlight the selection. Then press the delete key.
    To summarise, you start by highlighting the song/video/selection in either the iTunes library or on the iPod song list as displayed in iTunes then press the delete key on your keyboard: Deleting songs or playlists from your iPod

  • How to find serial number my ipod nano without laptop?!

    I need your help! I don't know where how to find my serial number without my laptop. Because someone stole my laptop and ipod nano. Finally, police found my laptop and ipod nano but asked me for serial number. So how I find my serial numebr. Please thank you!

    You store purchase receipt, the box it came in, where you wrote that information down.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T, Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. Lost or Stolen iPhone? Here’s What to do
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on MobileMe
      3. OS X Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
      1. VUWER 1.5.4
      2. Sneaky ******* 0.2.0
      3. Undercover 4.7
      4. LoJack for Laptops Premium Mac
      5. STEM 2.1
      6. MacPhoneHome 3.5

  • Where do I find ipod games in the itunes store?  It's for a 3rd gen ipod nano.

    I go to the apps section in the itunes store and the only games are for ipad and iphone.  The iphone apps say they'll work on ipod touch, but nothing about ipod nano.  I've found a bunch of FAQ stuff saying ipod games work on 3rd, 4rth, 5th gen nano and classic, but I can't find where ipod games are.  I did a search for "click wheel games" and it said that option is not available in itunes US.  I just gave my old 3rd gen nano to my niece and she's dying to get games on it, but I can't find them.  Some one save me!
    I synced the ipod to her parents account and checked for updated software, it said the OS was version 1.1.7 or something like that, and that that was the most current version.

    Apple no longer sells games for any iPods except the touch. Sorry, but unless you already had them downloaded to your iTunes account, you can't get them now.

  • Can't charge iPod nano 4G through AC adapter

    Hey I've got a AC adapter for iPod *nano 2G*.
    and I bought an ipod nano 4G recently and found that I wasn't able to charge it
    with the AC adapter I bought for nano 2G.
    And Idea?

    It wont work because the nano 2g uses firewire and the 4g does not support it.
    It will work if you buy an ac adapter right now from apple.

  • HT2305 I have a new computer with Windows 8 OS.  Do I need to install drivers so that my Ipod Nano will sync with this new computer:

    My daughter gave me a new Ipod (Nano) for Christmas.  I had no problem download my songs from my old Ipod (Shuffle) to the new one.  However - since I do not buy songs on a regular basis, I did not buy a new song until 4/29/13.  Now for information...sometime in March my old laptop died, completely.  I had to go buy a new one - which I did and this new one has Windows 8 Operating System on it (which I hate, btw). 
    Now, when I bout a song on Tuesday, the song did not go to my new Ipod.   I tried everything and finally had to talk to a tech - who was very kind in helping me and we did get all my songs from Itunes to this new computer.  I thought the song I bought would then go on the Ipod - but it did not.  I had already hung up from the tech - since we had been talking on the phone for about an hour.  He informed me that he was giving me a "courtesy break" because it has been over 90 days since my new Ipod was purchased ---- just my darn luck! 
    Anyway, I have figured out on my own that the new Ipod Nano is not synced with the new laptop with Windows 8.  I have been trying for the last 2 hours to get it to do so and in doing so, found out that Windows 8 is not mentioned in any of the help forums.  So...my question is:  Do I need to install drivers on the computer or what?  I will not be purchasing anymore music from Itunes until I get this matter resolved.  Any help will be apreciated. Thank you.
    Judy1942

    Try http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer

  • Ipod nano 7th with archives not found

    Hy, my ipod have archive with 9 gb that i dont found.

    If you mean iTunes can't recognize your iPod Nano, try these steps.
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.
    <Link Edited by Host>

  • Windows Vista Ipod Nano drivers??

    When I connect my iPod nano 4gb to my new laptop, with iTunes 7 installed, it tells me it needs to install drivers and insert CD...but I dont have the CD!
    Can anyone give me a link for these drivers at all, or give me adivice on how to get around this?
    I've previously read a suggestion to manually search for drivers by specifying 2 distinct folders - System32 I think, and also going through Control Panel, Devices, Ipod, then selecting different options for updating drivers.
    Nothing works yet!!!
    Please help guys

    Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
    I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
    Good luck!

  • Can't find drivers for ipod nano 8GB for windows vista HELP

    I am trying to find the drivers for my ipod nano 8GB. I am running Windows Vista on my laptop. I have tried absolutely everything listed on this webpage and others. I have removed itunes and reinstalled it and still nothing. I downloaded usbstor.sys and usbstor.inf. I have gone into my computer and clicked on the ! next to my ipod in file manager and have gotten nowhere! This has been 5 days of frustration. I don't understand why apple would not just SUPPLY the software for the nano. I am beyond frustrated now. Can someone please help...

    Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
    I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
    Good luck!

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

Maybe you are looking for

  • Main circuit not found in spice netlist

    Hi all, I'm trying to import a .cir file for vishay 6N137, however I keep getting the error main circuit not found in spice netlist.  Does anyone know what is wrong with the spice file?  I've pasted it below. ** Spice3 Model ** **  --  6n137,VO2601/1

  • What is the default value of EO_INBOUND_PARALLEL

    Hi Gurus, We are on PI 7.0 EHP 1. We have not set the parameter EO_INBOUND_PARALLEL. Does this mean there is only one inbound queue registered by default if the default value is 1? However, I seem to recall that when we had issues with messages stuck

  • Size of calendar

    Hi, I would welcome any tips / experience on java.util.Calendar memory needs. We are planning on using Calendar as our core datetime datatype for an application that would hold a huge amount of business objects in memory. I am concerned about the Cal

  • BP Transport Zone

    Dear Peers, In my CRM Prod client have all the transport zones of ECC, now the same transport zones need to maintain in CRM Test client. what is the action that i need to do? 1. raise customize request 2. manually maintain in test cleint 3. anyother

  • Quicktime 7.1.5 disabled Shockwave/Flash on Firefox

    After installing QT 7.1.5 yesterday a number of web sites that use Shockwave/Flash no longer work. Instead of the video pane that should come up, I get the Quicktime logo with a question mark in it. This includes sites like espn.com, youtube.com etc.