Ipod nano 4gb use itunes to restore востанавливаю все равно все тоже

ipod nano 4gb use itunes to restore востанавливаю все равно все тоже

restored my ipod and now it works but why does this happen? Is this a hardware problem, if it is, should i return my ipod. Or is this just a software problem that will be fixed in future updates?
I'm not sure why exactly an iPod will say "Use iTunes to restore", but probably just because of a regular internal software problem.
If you're iPod isn't displaying "Use iTunes to restore" anymore, and if it's acting fine, this was simply a isolated incident, which may occur now and then to a few iPods, if they're OS (operating system) gets messed up.
It's similar to if your iPod once apon a time your iPod froze up, then displayed this symbol (it means you need to restore your iPod):
You restored the iPod, and have never gotten that icon or any problems ever since.
Will the need to restore your iPod recurr? It would only be by chance, and not relating to that isolated incident; this is, if you're iPod isn't displaying any failure messages soon after, which indicates a recurring true hard drive problem, not just a temporary one.
If your iPod begins to display "Use iTunes to restore" or other failureful (that's my term for a symbol or behavior that indicates a failure) icons/messages soon after this, you can suspect that your iPod has a true problem with its hard drive/flash drive that a restore didn't fix.
In this case, you would probably send your iPod in to Apple to get it repaired or replaced.
I hope that explanation answers your question.
-Kylene

Similar Messages

  • IPod says to use iTunes to restore but keeps going into disk mode.

    So whenever I reset my iPod, a screen pops up that says to use iTunes to restore it but when I plug the iPod into the computer, it goes into disk mode and iTunes doesn't read it.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • TS3212 how do i unlock my screen on my ipod nano without using itunes

    how do i unlock my ipod nano screen without using itunes?

    Sorry, but you can't. If you've forgotten the code, connecting the iPod to the computer from which you sync it or restoring the iPod are the only solutions.
    Regards.

  • Ipod says "Use ITunes to Restore", then Chinese! Did I lose all music?

    I used my ipod nano (dont know the generatino, but got it x-mas 06) yesterday. I plugged into a new computer and then installed ITunes. When I ejected the ipod, it stated "Use ITunes to Restore" then everything was in Chinese. When it is plugged in initially it states "ITUnes has detected an ipod in recovery mode. You must restore this ipod before it can be used with Itunes". It is not even stating my ipod name on the itunes page . Has anyone any idea here? I am completely lost and have NO backup of my music Thanks!

    So, hitting "restore" is the only way to solve this
    Yes.
    Basically all music that I downloaded from CD's, will be gone
    Did you delete it from iTunes after you put it onto the iPod?

  • My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

    My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

    My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.  I have the latest version of iTunes.  Windows has all the most recent updates too.  I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • Ipod Nano 7th Generation is saying Use Itunes to Restore. Itunes no longer recognizes my device

    Please Help, My Ipod nano 7th generation was syncing. When I disconnected from my computer, I no longer had any music on it. When I plugged it back in Itunes prompted me to restore my Ipod. I went ahead and restored it, but it kept asking me to restore. When I unplugged my ipod, I got a white screen saying Use Itunes to Restore. Problem is Itunes no longer picks up my device. I've tried plugging it into different USB ports, I've tried to update Itunes to the newest version, and uninstalled and reinstalled itunes. I've tried to reset the ipod, but it still goes back to the white screen saying "Use Itunes to Restore". I've been trying everything. Please Help.
    Thanks

    No. You need iTunes on a computer to restore it.  If you don't have iTunes you can download it from here:
    http://www.apple.com/itunes/download/
    If you don't have a computer, can you can try to borrow one with iTunes installed.

  • I have an ipod nano 4GB and use pc windows xp . since last year my ipod didnt sync any new songs saying "the ipod cannot be synced the required folder couldnt be found" and when i try to update the itunes version another error occured. plz HELP!!!!!!!!!

    I have an ipod nano 4gb and use pc with windows XP. since last year my ipod suddenly didnt want to sync any new songs saying " the ipod "MOAMEN" cannot be synced. the required folder couldnt be found" and when i try to update the itunes version another error occurs and i dont know when i tryed to format ipod i didnt find "format" button. so plz give me suggestions instructions i extremely bored !!!!!!!!!!!!!1

    Uninstall/Reinstall iTunes then try to rebuild the library.
    http://support.apple.com/kb/HT1925  (uninstall/reninstall)
    http://support.apple.com/kb/HT1451 (recreate library)

  • New iPod Nano isn't being recognized, with "Use iTunes to restore"

    I got this new Nano yesterday and I took it out the box, tried it for a while, etc. I then installed iTunes 9 and after that everything was fine, so I plugged it in, hoping to sync it with my library and charge it. It did both for a while. Unfortunately, it was at this moment my PC decided lock up, and I had to use CAD to stop all the programs that were running, including iTunes, with the Nano still plugged in. Now the only functions of the Nano are to show the Apple logo for a bit, go to black and then show the "Use iTunes to restore" screen. I Googled and found that this means it needs to be formatted for Windows use. However, I plug it in and Windows refuses to recognize it, as does iTunes. However, it does connect when I press both the select and menu buttons (I tried to put it into disk mode, but this doesn't work) only to disconnect a few seconds later when iTunes tries to download the recovery software. Can anyone help? Nothing is working. Thanks.

    I have also just installed my new Nano, had to upgrade to itunes V9, this worked eventually and then the nano locked up along with the PC. rebooted the PC, reset the Nano, all looked good until I tried to reconnect the Nano to the PC. it connected and then immediately disconnected and itunes gave an error saying that it couldn't read the ipod, try to reconnect.

  • TS1456 My 4th Gen iPod Nano isn't displaying a "Use iTunes to restore" message, but iTunes is displaying a restore message when I connect it. I have original music that I can't back up on my iPod. Is there any way that I can fix the iPod without restoring

    My 4th Gen iPod Nano isn't displaying a "Use iTunes to restore" message, but iTunes is displaying a restore message when I connect it. I have original music that I can't back up on my iPod. Is there any way that I can fix the iPod without restoring it?

    It's not designed to work like this. When you sync, the iPod stores some information that basically says 'this iPod belongs to computer xyz'. Apple did this to prevent copyright issues (syncing someone else's music).
    If you really want to do this, you'll have to at least tie both iTunes installations to the same account. Maybe have them sync with each other.

  • I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID

    Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!

    Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
    Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
    http://www.apple.com/contact/

  • IPod Nano 4th gen - Use iTunes to Restore

    My cousin went to India for a couple of months so he gave me his iPod Nano. It was working when i got it, and i listened to his songs. So I downloaded the latest version of iTunes so I could put my songs in it. When I connected it, iTunes told me to restore it so I did. In the process, it showed an error (1437). So I disconnected it and my nano had this white screen and it says "Use iTunes to Restore". Which I tried many times, and the same error happens.
    Now it's not even showing my in My Computer (running Windows Vista). I tried resetting the Nano multiple times and it turns into a black screen for about 2 seconds, then it returns to the "Use iTunes to Restore" screen, I do not get the screen with the apple. If I cannot fix this, will I be able to take it to a Apple store? I have the one year warranty. The Problem is, my Cousin only gave me the iPod, no cables or headphones. I am using the charging wire from my iPod video (5th gen), could this be the problem? Will the Apple store fix it for me without the receipt and the original box?

    Hello, olono. 
    Thank you for visiting Apple Support Communities. 
    Here is a resource you may find helpful when troubleshooting this issue.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/TS1441
    Cheers,
    Jason H.

  • Ipod nano 7th generation "use itunes to restore"

    Now 1) the ipod is formatted
    2) when i connect to pc it displays white screen with "do not disconnect"
    3) Itunes doesn't detect ipod
    4) when the ipod is not connected to pc it displays "use itunes to restore"
    this is the current situation
    What shall i do ?

    No. You need iTunes on a computer to restore it.  If you don't have iTunes you can download it from here:
    http://www.apple.com/itunes/download/
    If you don't have a computer, can you can try to borrow one with iTunes installed.

  • My ipod nano 7th generation is telling me to use itunes to restore but i dont have itunes is there any other solution

    my ipod says use itunes to restore but i have not got itune

    No. You need iTunes on a computer to restore it.  If you don't have iTunes you can download it from here:
    http://www.apple.com/itunes/download/
    If you don't have a computer, can you can try to borrow one with iTunes installed.

  • Use iTunes to restore? iPod in recovery?

    I just bought a nano today, my first ipod, and I don't know what's wrong with it.
    On the display it says "use itunes to restore", but when I restore it using itunes, itunes says it has detected an ipod in recovery mode and the says I have to restore it before I can use itunes.
    I've tried all the troubleshooting suggestions, although I'm not sure I did them properly.
    Can anybody help?

    Try here.
    http://docs.info.apple.com/article.html?artnum=304503
    If you are stuck in the recovery loop, try this.
    Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
    Choose something lower down the alphabet, say 'M' or something similar.
    The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.

Maybe you are looking for

  • All Enterprise Keyword options are greyed out

    I just did a migration from SPO to SP13 on-prem. When I go in, I can see the keywords have been moved over, but the area to add them is greyed out. I went into the options for one of the libraries, and checked the Enterprise Keyword settings, and it

  • IMac Why does iMac show mid 2011 when purchased mid 2012?

    Just checked about my mac and surprised to find its stating mid 2011 when it was purchased from UK Apple store July 2012.  Could anyone explain why this would be?  Thank you

  • Which Edition

    Hi, is there any query in sqlplus to see which Oracle edition (STANDARD or ENTERPRISE) is installed ? Many thanks.

  • Flash content appears then disappears

    I am having problems with Flash Player. On a website it will briefly show what is there and then revert to the page backgroung color. If I point at the content the arrow changes to a hand and I can click and proceed. However that is because I know wh

  • Indesign CS6 crashing on startup

    When starting indesign on mac os x version 10.7.5 runs through loading up screen and then freezes on the create new/open document screen and has to be force quit everytime. Have uninstalled and reinstalled, tried fixes noted in other answers that req