IPod nano 6th gen won't play my music.

My iPod nano 6th gen has worked fine for years and when I synced it recently it would play some tunes fine, cut some off mid-way through and skip some completely. The first thing I done was just tried to sync it again but this didn't make a difference so I reset my iPod through iTunes and synced it again but this made it worse, when I pressed play it comes up with the pause button but if I go to the next screen where you can see how far through the song is the bar wasn't moving, so the tunes aren't playing, so following this I formatted my iPod on my pc and then reset it on iTunes (I had to replace the folders I had removed during formatting) and that didn't do anything it still won't play anything. It's not my headphones as they work fine in my pc, and it's not my music as it worked fine before and they all play fine on my pc. What else can I do?

What do you mean by select tracks? It will only play particular tracks or repeatedly play a particular track? What format are these problem tracks in?
B-rock

Similar Messages

IPod Nano 6th gen won't sync with iTunes 12.1.1.4

iPod Nano 6th gen won't sync with iTunes 12.1.1.4.
This iPod was synced with another iTunes library. I had to transfer iTunes library from another laptop.
Launch iTunes (12.1.1.4), plug in Nano, Nano display says connected, Nano appears in iTunes, but when I attempt to navigate to Nano nothing occurs, or if I am able to navigate to Nano then I can't go any further and select music to sync and the Nano comes out of connected state. I have had to close iTunes, sometimes reboot laptop, but nothing I do appears to make any difference. It won't allow me to continue music selection process and start the sync process. Is there a way to simply reset the Nano and reconnect to get it to sync? I don't care about content as it needs to be resynced with this iteration of iTunes because it is currently associated with the other iTunes library.
Any suggestions would be appreciated.

What solved my problem:
I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
Additional details:
I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

IPod Nano 6th gen. won't sync to iTunes 11 on Windows 8?

Hi, I recently acquired a new Windows 8 laptop and after installing iTunes 11 I decided to sync my iPod Nano 6th gen. My iPod was last synced to iTunes 10.6 on Windows 7. When I synced the iPod to the new laptop I was receiving the problem of the WDF_VIOLATION which had something do to with Windows 8 and iTunes 11 being in compatible. I changed the compatibilty settings for Itunes to Windows 7 and the error has passed. The problem left standing is that my iPod will now not sync the library. After clicking"sync" either a very fast recognition happens or nothing at all will hapen and either way I'm left with the same music as I had on the previous iTunes. Is there a reason or anything I can do to change this? Thanks

You can only sync with one iTunes library. See the following for switching syncing computers.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

IPod Nano 3rd Gen won't play AIFF files from Logic Pro 9

Hi, so I've bounced a few tracks I was working on in Logic pro 9 as AIFF files, imported them into iTunes and then synced them down to both an iPod Touch 2nd gen and this iPod Nano 3rd Gen. The tracks play fine on the iPod Touch, but on the Nano, when I try to play a track, it shoes the "player" screen for a second, but it always bounces back to the track listing.
According to the iPod Nano 3rd gen spec sheet, it does support AIFF files:
http://support.apple.com/kb/SP14
Any idea as to why this is happening?
Also, I'm on Mac OS X 10.6.4, iTunes 9.2 and I reset the iPod nano just before starting this whole project.
I'd like to keep the tracks in AIFF if possible...

Greetings WonderfulT1,
If you are having an issue with being unable to start your iPod nano when it is not connected to the computer, I would suggest that you troubleshoot using the steps on this page -
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
Thanks for using Apple Support Communities.
Be well,
Brett L

IPod nano 6th gen won't synch with iTunes 12.1.1

Since I upgraded to iTunes 12.1.1.4 on my Windows 7 PC a couple of weeks ago, I have been unable to synch my iPod nano 6th generation (SW version 1.2) with iTunes. I have followed Apple's instructions to uninstall all of my Apple SW, restart my PC, then install iTunes again, restart my PC, then attempt to synch. I get the same failure I had before re-installing iTunes. My iPod connects with the PC and displays an icon on iTunes. I can select the iPod icon on iTunes and select the menu items under "Settings" and "On My Device", and all of the music and podcasts stored on my iPod are displayed. But when I select "Synch", I get the following two error messages:
1. The iPod "Larry's iPod" cannot be synced because it cannot be found.
2. The iPod "Larry's iPod" cannot be synced. The disk is not available.
I never had such problems with any prior version of iTunes during the several years I have owned my iPod. Help!
Thank you.

What solved my problem:
I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
Additional details:
I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

IPod Nano 6th Gen Won't Sync After Getting iTunes Match

I have a new iPod Nano 6th Generation, with the new clock faces, bought in december. I bought iTunes Match in early january.
After syncing and using my ipod successfully, I was confident that iTunes Match would not effect my ipod syncing as I only use iTunes Match for my Mac and iPad. However, after adding some CD's to iTunes and downloading some tracks, my iPod began syncing but then was interuppted by an error - 13019. It then wouldn't sync. I restored the iPod and the error came up again and after a few failed attempts, the iPod went into a boot loop showing the apple logo, then the homescreen then it would flash white and show the apple again.
I then thought to test it I would turn off iTunes match and sync the iPod and see if it would work. It didn't however, after restoring it with iTunes match turned off, it worked and synced, albeit with no playlists for some reason.
I am very disappointed and would like to know if I could fix it so my ipod can sync with itunes while iTunes match is turned on (the best option) or to be able to get a refund on iTunes match if it will not work and is causing me to not be able to use my iPod.
Thanks for any Replies
Andrew

I have a new iPod Nano 6th Generation, with the new clock faces, bought in december. I bought iTunes Match in early january.
After syncing and using my ipod successfully, I was confident that iTunes Match would not effect my ipod syncing as I only use iTunes Match for my Mac and iPad. However, after adding some CD's to iTunes and downloading some tracks, my iPod began syncing but then was interuppted by an error - 13019. It then wouldn't sync. I restored the iPod and the error came up again and after a few failed attempts, the iPod went into a boot loop showing the apple logo, then the homescreen then it would flash white and show the apple again.
I then thought to test it I would turn off iTunes match and sync the iPod and see if it would work. It didn't however, after restoring it with iTunes match turned off, it worked and synced, albeit with no playlists for some reason.
I am very disappointed and would like to know if I could fix it so my ipod can sync with itunes while iTunes match is turned on (the best option) or to be able to get a refund on iTunes match if it will not work and is causing me to not be able to use my iPod.
Thanks for any Replies
Andrew

Ipod Nano (7th gen) won't play in Prius

I have no problems with my ipod classic or with my husband's ipod classic (these use the old USB cords). But when I try my nano or iphone 5 (both use the newer cord that came with the nano), the connection doesn't work.
When I connect it, I get the black screen that says that the device is connected and I can play music through the stereo as usual. Music will play for about 10 seconds and then the ipod stops. At this point the ipod either restarts completely or goes to it's home menu and doesn't reconnect to the car. I will try unplugging the cord and restarting the process but it doesn't always work. I've tried resetting the nano but it doesn't seem to make a difference. The disconnection issue happens whether the car is moving or if I'm parked in my driveway. I have also tried getting a new cord and using the one that came with the iphone but it didn't make a difference.

does no one have any suggestions?

IPod Nano 6th gen won't sync - help please!

I lost my iTunes and all my music when my laptop died, but managed somehow to get it all back onto my new laptop - none of my music is purchased though iTunes but downloaded separately or from CDs. However when I sync my iPod it doesn't actually change anything or add new songs from my iTunes, and playlists on my iPod do not appear in my iTunes. Help please! I've tried manually managing my music and syncing but that doesn't work either, and when I plugging it into my computer it says on the iPod screen that its syncing but it doesn't show that it is in iTunes.

Depending on how you add content to your iPod, have you seen this article?
iTunes: Error 13019 during sync
B-rock

IPod nano 6th gen

My iPod nano (6th gen) won't sync to iTunes. I have tried un and reinstalling iTunes, reseting my iPod, and have unchecked enable disc use and manually manage music and vidoes. When I click on sync it shows on both my iPod and in iTunes that it is syncing, however no music (or other items) show up on my iPod, and the it is the same with iTunes nothing on my iPod will show up there ( I recently got a new laptop (asus windows 8.1) and have used this iPod and iTunes without any trouble previously) I have been through all of the iPod help instructions and completed them sucsessfully. I'm really not a technical wizz, PLEASE help me!!??

Hello Elblp,
And welcome to Apple Discussions!
Do the new ipod nano's play movies and music videos?
Sorry, but they do not.
B-rock

I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
B-rock

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i

Ipod Nano 6th Gen damaged Apple won't repair...any options?

I have had my Ipod Nano 6th gen for about 8 months and used it religiously during work outs...unfortunately I sweat a lot and apparently this will damage Ipod Nano to the point that Apple considers this to be outside the guidelines of normal manufacturer warranty. I am a little frustrated by this as I spend a fair amount of money on Apple products every year. Any advice on what I can do other than just sell it as damaged on eBay?

The best thing to do is consult Genius Bar. But as you have already said Apple does not honor the cause of damage and therefore not eligible for replacement. I recommend to visit an apple technical support to confirm the initial assessment.
You can try the out-of-warranty repair and determine how much it will cost you to repair. But try to weigh in cost of repair vs. a new replacement. Here is apple's statement about out-of-warranty repair.
If you want to set up your iPod for the Out-of-warranty service, we recommend that you take your iPod to a local Apple Retail Store. Alternatively, you can contact Apple Technical Support.
For more details, please refer to the Repair Pricing tab on the left.
If Apple determines that an iPod is not repairable, for example, if it has failed due catastrophic damage or the iPod has been disassembled into multiple pieces, then Out-of-Warranty Service is not available and the iPod will be returned. Please see Apple's Repair Terms And Conditions for further details.

My iPod nano 6th gen only plays through 1 speaker in my VW rabbit (2007). Help.

I connected my ipod nano 6th gen using the VW aux cable in my 2007 rabbit. The connect came through, but only through the left front speaker. Please help!

Oh, Bluetooth also daoesn't work anymore!
Thanks for this great update, that causes problems where everything worked fine before!

IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
This is what happens:
When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
I have also restored the device in itunes, with no luck.....
Thanks in advance for any useful answer!

Thanks for your answer...
The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

Charging iPod nano 6th gen

I have no problem charging the battery thrugh the USB 2.0 port on the computer, but using the firewire power adaptor from my old iPod doesn't seem to work. I also tried using the docking station without luck.
Do I need a completely different power adaptor to charge my nano? Or am I doing something wrong?

The problem may have something to do with both the cable and the voltage. Older Nanos run on 12V DC, and newer Nanos on 5V DC. That wouldn't necessarily be a problem (pushing 12V into the device would charge it faster, although it would shorten battery life over the long haul) except that Apple, supposedly also changed the pins designated for charging. Not sure of the exact pin number, but I think #19 is now the 5V charge pin for new Nanos, while in older Nanos it was (I think) #23 or something like that for the 12V charge pin. All in all, the advice below was correct, you can't use an older Firewire iPod cable on newer iPods. The only reason I know about this whole voltage and pin problem is because the new Nanos won't charge while connected to the iPod cable in a new Mercedes Benz - they play fine, but won't charge. Mercedes uses a cable with the old pin set up, and my Nano 6th gen won't charge.

IPod nano 6th gen won't play my music.

Similar Messages

Maybe you are looking for