Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second
ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?
I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.
Similar Messages
-
IPod nano 7th generation battery issues
I am only getting 2.5 hours of playback after a full charge to my nano. My older iPod (5th generation) would last for days before it would need a charge. Is this an issue that others have experienced or is this an isolated issue with a defective battery in my unit?
Hi fgduthie,
If you are having persistent unexpected shut down issues with your iPod nano, you may find the troubleshooting in the following article helpful:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Regards,
- Brenden -
IPod nano 7th generation sensor issue
I just got an iPod nano 7th generation. I'm trying to figure out the nike fitness section. It keeps telling me "not linked to sensor" when I try to set up a run. I was under the impression that I wouldn't have to buy a separate sensor. Is this true? Can someone help me figure out what to do? Thanks!
You need to disable the nike + sensor in Nike app in your ipod. When disabled you will be able to do run/walk workout using the built-in pedometer. Cheers!
-
IPod Nano 7th generation USB port unrecognised on windows 7 - help tried everything I could find
Please help have been given an ipod nano 7th generation but cannot get it to work, downloaded latest itunes software, done all microsoft updates, restarted numerous times, have tried others suggestions online, nothing working. The usb port works with other usb devices so no idea why won't recognise ipod. Do I give up and try and get a replacement ipod?
downloaded latest itunes software
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Ipod nano 7th generation major UI issues !
ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?
I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod. -
Ipod Nano 7th generation bluetooth compatiable with JBL flip
Just bought a new nano and it is not connecting via bluetooth with the JBL flip. It does not seem to detect the speaker at all. Any suggestion to check the blutooth of the nano is working at all.
If you do a search here you will find the Flip comes up often. Make sure no other devices that have paired to the Flip are in the room with you and clear all pairings and put the Flip in discoverable mode.
-
Ipod Nano 7th generation touch interface is now screwed with due to apple update.
Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
DO SOMETHING ABOUT THIS APPLEHi ImAMinion.
Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
From the home screen I got to settings by swiping up and down instead of the normal left and right.
To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
Hope that helps. -
I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?
Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Ipod nano 7th generation is playing but I cannot hear the music
I have a 16 gb ipod nano 7th generation. I've followed all the instructions in syncing and all seems fine except I cannot hear the music through the earbuds, even though the ipod shows it is playing. What am I doing wrong?
Thanks shielafromgreshamHi shielafromgresham,
Welcome to the Apple Support Communities!
If you are not getting any sound from your headphones on your iPod nano, I suggest reading over the information in the following article. Along with the information in the Acoustics section of the article, make sure the headphone jack is pushed completely into the headphone jack.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Acoustics
Follow these steps if there's no sound coming from your headphones.*
Verify that the headset is plugged in to the iPod .
Check the volume setting.
Try adjusting the volume by pressing the volume buttons.
Try another song or audio file.
Try another headset.
Reset iPod by holding down the Sleep/Wake button and Home buttons until you see the Apple logo appear.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Have a great day,
Joe -
My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens. I have tried uninstalling & re-installing Itunes but this didnt help.
Does anyone have any ideas?
Thanks for your help.I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply. -
ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.
yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple -
Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?
Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.
-
Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380) -
It doesn't say so on the box, just the ipod nano 6th and earlier. I am hoping someone already tried using the 7th and has an answer.
Hello Jay,
Welcome to the Sony Community.
The Sony RDH-GTK33iP Home Audio Docking System is not compatible with iPod Nano 7th generation.
Thank you for your post.
Maybe you are looking for
-
Spatial index creation for table with more than one geometry columns?
I have table with more than one geometry columns. I'v added in user_sdo_geom_metadata table record for every column in the table. When I try to create spatial indexes over geometry columns in the table - i get error message: ERROR at line 1: ORA-2985
-
An issue of deploying war file on tomcat 5.5
Hi, I know the regular process to deply a war file is like this - stop tomcat server, remove your previous war file and directory, say abc.war and dir abc, copy your new version abc.war into webapps and restart tomcat server. However, I found an inte
-
My family recently got a new Gateway windows 7 computer, because our old one crashed. I had to reinstall itunes, and now have absolutely no music on the computer. When I plug my ipod touch into the computer it gives me like two choices it asks if I
-
Adobe Acrobat 7 Professional overwritten by Adobe Reader 7
I have had both the Acrobat Professional coexisting with the Reader for two years. Today my Reader updated and now my Acrobat Professional won't start anymore. Normally, after such a update, I could make a PDF file open in the Professional as a defau
-
Buffered Reader Question about wrapping around another Reader
I'm reading about BufferedReaders and in the API the following paragraph reads: In general, each read request made of a Reader causes a corresponding read request to be made of the underlying character or byte stream. It is therefore advisable to wra