Ipod not ejecting properly

Hey my nano 4th generation is not ejecting from windows XP and itunes properly. When i click on the eject button of itunes a message comes saying content of ipod is being used by some other application so cant eject and when i try to ejecy it by the safely remove hardware application whose icone is on the task bar near the clock in Xp a message comes Genetic volume is running so cant stop the device . PLZZZZZZ help...

It will depend on whether your computer or any recovery program you use is able to read the iPod contents.
Check out the instructions/suggestions here.
Music from iPod to computer (using option 2).
There's also another method. I've successfully tested this across several different Windows PCs.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), there's Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
The above methods may depend on what version of iTunes you are running.
If none of these methods work, try CopyPod

Similar Messages

  • HDD & iPod 'not ejected properly' when iMac wakes.

    Hello again folks.
    I have a strange issue with my iMac and USB connected peripherals.
    I have an Iomega Mac Companion HDD used for Time Machine backups and an iPod Nano (4th Gen) connected via USB (both directly to the iMac).
    A while back I noticed that when waking the Mac from sleep I'd get the 'disk was not ejected properly. If possible......' message and both iPod and backup drive were disconnected.
    I adjusted the energy saving properties to not put the HDDs to sleep and all was well until recently.
    All I did was move the USB ports that the HDD & iPod were connected to after having a cable re-shuffle.
    Ever since then whenever the mac wakes from sleep both drives are disconnected. You get the same 'not ejected properly' error, once okayed the drives pick back up.
    I don't understand why all of a sudden this is happening, the option to send them to sleep hasn't changed and obviously I don't want my devices to keep disconnecting in this way.
    Any advice would be really appreciated.
    Many Thanks
    Matt

    UPDATE:
    I have had to disable the sleep function on the iMac for now.
    May not save me the energy but may just save my data!
    If anyone reads this and does have a solution in the future then please let me know.
    Thanks
    Matt

  • Device not ejected properly error message on all external storage devices: SD, Ext HD, iPod, IPhone, etc.

    All external storage devices (USB HD, iPod, iPhone, SD card reader, etc) are not staying connected.  Connection runs for 10-15 sec and the error message "card not ejected properly" appears.  Have reformatted cards, performed a OSx install disk permissions and disk repair, re-installed and updated OSx, and PRAM reset.  After the OSx reinstall I had no problems for about 2 days then my iPod shuffle sync triggered the error message.  I follow good practice in ejecting disks from the Finder window or iTunes.

    thought i had it licked after taking to the local service center.  they checked out the hardware and felt there was no problem getting power to the USB and SD ports, eg the suspected cause of the eject.  they thought it might be a buried permissions problem in some dl'ed software that the repair utility would not find/fix.  sooo...i wiped the disk and reinstalled everything from scratch.  worked for about a month and now its showing up again.  just kicked off my shuffle.  the sd reader self ejects after about 10 seconds.  dunno where to go from here.

  • Error I get when iPod Nano 3rd Gen is plugged into iTunes: The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off.

    I have an iPod Nano 3rd Generation (2007), and When I plug the USB in and all that, the Apple logo appears then goes to menu quickly, then to a "Connected" screen, and it shows up in iTunes for about 5 seocnds before I get this error:
    "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off."
    .....I have no idea what to do, so help! please

    have you tried using the Restore option in iTunes to reset the entire iPod?

  • Why doesn't the mac tell me which disk was not ejected properly? How can I find out which one it is referring to?

    If the mac knows that a disk was not ejected properly why doesn't it tell me which one? Would that be making life too easy for non computer nerds????

    Hello Rails50
    All External Hard Drives, Flash Drives, Camera Cards, iPods, iPads etc. need to be ejected before you disconnect them. Likewise you may also get that message from any of the above mentioned devices if it is going bad, has a bad cord or a flaky connection.
    To check your Console Log Messages, go to: Applications > Utilities > Console and select All Messages.
    On that note, it would also help greatly if we knew what external device(s) you are using with your iMac?
    Dennis

  • Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

    Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly."  I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues.  I use this disk for my Time Machine backups.  This always seems to happen when the computer wakes from sleep, but not consistently.  The computer was asleep overnight and backed up as soon as it awakend this morning.  Two hours later I get the improper ejection message.  I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem.  This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

    I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
    http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
    I document how I discovered this in my blog post:
    http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

  • I am getting error message "Disk Not Ejected Properly Eject "FreeAgent GoFlex Drive" before disconnecting or turning it-" randomly.

    I'm getting a "Disk Not Ejected Properly  Eject “FreeAgent GoFlex Drive” before disconnecting or turning it…" message at random times.  I have seen other comments about this happening after the iMac wakes from sleep.  However, this is happening to me throughout the day even when I am working on the iMac.
    The iMac is up to date with OS X Version 10.9.  I had recently switched from a 500GB to a 3TB Drive, both are Seagate.  I have never had this issue prior to the switch.
    Has anyone else experienced this issue?
    I verified/repaired in the Utility Disk and a message popped up indicating the GoFlex looks "OK".

    No, I am not on the USB3 interface.  I contacted Seagate and they indicated that there is no known issue with OS X 10.9.  In my case, they are willing to send me a new Drive, since I just received the GoFlex on 12/06. Will post an update when I install the new one.  Hopefully this will solve my issue.
    I suggest you contact Seagate, if you haven't already, directly.  The representatives are very helpful.  Good luck.

  • My iMac is disconnecting all my media hard drives and giving "Disk Not Ejected Properly" message since updating to OSX 10.9

    Ever since I updated to OSX version 10.9 on my iMac, it is disconnecting all of my media hard drives and giving me the message: "Disk Not Ejected Properly." My hard drives are connected to my iMac through a Nitro Professional 8-port Firewire 800 hub/repeater, and a Firewire 800 cable from the Nitro hub connects to the back of my iMac. This configuration has been working fine for over a year. Suddenly, and immediately after performing the update about a week ago, the drives won't stay connected for more than a few seconds before the iMac disconnects from my drives. I've tried restarting and reconnecting many times and the same thing keeps happening.
    I have a new MacBook Pro (one month old) that I've been using temporarily to work with my photos and video on these drives as the drives are able to stay connected to this computer—I put a Thunderbolt adapter onto the Firewire 800 cable to connect to it. Luckily I had not yet updated it to the new operating system and I am afraid to do that. I've had the persistent message that Updates are available for my computer on my MacBook but I will not perform any updates for fear that I will lose access to my media drives. I am a professional photographer, so it's pretty disasterous if I can't access my drives. Please advise me what to do to keep my hard discs connected to my iMac and what to do to keep this from happening with my MacBook.
    Thanks in advance for your knowledge and assistance!

    Hello Roma2001,
    Thank you for the details of the issue you are experiencing with your FireWire hub. 
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • "disk not ejected properly" but is still mounted on desktop?

    Hi,
    I get a "The disk was not ejected properly" message, yet if I go to the Finder's desktop the drive is still mounted and accessible and read/write works fine.
    I've witnessed it happen once while viewing the desktop. The drive disappears momentarily for about 1.5 - 2 seconds, then shows up again. So It DOES eject, but it instantly re-mounts, and I mean in under 2 seconds and I've neder experienced a drive intentioanlly unmount/remount this fast in my life. It does happen more often when waking from sleep, but not only in that instance.
    Been having this bug since OS X Lion and on to the current version of Marveicks. I am posting this under Mavericks because it's not hardware specific to anything other than USB and LaCie. I am experiencing it on multiple machines, different models, with different external LaCie drives of differing types, with different USB cables. This does not only happen when waking from sleep (as most threads seem to indicate), it sometimes happens for no reason. 
    The common factors:
    All the external drives are LaCie drives (though vastly different models).
    Both affected Macs are 2012+ models with Thunderbolt interphases and USB 3 ports (am using USB ports for USB drives, no Thunderbolt adaptors). 
    I could suspect LaCie, but since it's new since Lion... well you get the picture. Something leads me to suspect a bug in OS X USB protocol, possibly on software, maybe even in firmware. Might be linked to energy saving. I have "sleep drives when possible" enabled, and though it might help to turn that off (I haven't tested yet) I just don't feel I should need to, I want unused drives to spin down and save energy.

    Hello there The Heftster,
    It sounds like your external drives are periodically disconnecting on their own from the computer causing the prompt saying that the drive was not ejected properly. I would start by resetting the PRAM on your computer with this article:
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    As well as the SMC on your computer:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • OSX Mountain Lion "Disk not ejected properly" USB-Finder not responding

    Hello,
    I just upgraded to OSX Mountain Lion late 2008 macbook pro. Whenever i plug in a USB, it detects it fine. But then when i copy anything to it, it starts but then give the error message "Disk was not ejected properly". After that, my finder hangs and i have to force quit it. And then it doesnt launch unless I do a restart of my computer by pressing and holding the power key because normal restart doesnt work. Happen to anyone? any solution? Thanks!

    Connect the USB device then right or control click the USB device icon on the Desktop, then click Eject.
    Then re connect the device and try copying files.

  • I unplugged a USB data device without ejecting it properly via 'Finder'.  Now whenever I plug in the device I received an error message stating that the 'disk was not ejected properly

    Now when I plug in the device I receive an error message stating that the disk was not ejected properly & that next time I connect the 'disk', MAC OS X will attempt to repair any damage to the information on the disk.
    It has not repaired.
    The data I am trying to import is photos & even when I change to a different SD card I receive the same message.
    I am a recent convert from Windows and am new to the MAC way of things.  

    You can repair the SD card using Disk Utility.
    I suggest you copy the photos from your SD card, if you haven't done so already, before using Disk Utility to repair your SD card.

  • Why do I get disc not ejected properly error message

    Why do I keep getting disc not ejected properly error message since updating my operating system to 10.8.2?

    Without any details on how you're trying to do this, no one can respond, intelligently.

  • The disk was not ejected properly

    I have 3 Seagate 1.5TB external USB drives. Two of which I am using with a MacbookPro 17" first gen. Latest snow leopard. The third one I am tethering to a Dell XPS server. The one attached to the Dell works fine.
    On the MBP17 Every now and again (randomly) the disk disappears from finder and I get this dialog:
    |
    | The disk was not ejected properly. If
    | possible, always eject a disk before
    | unplugging it or turning it off.
    |
    | To eject a disk, select it in the finder and choose File
    | > Eject. The next time you connect the disk, Mac OS
    | X will attempt to repair any damage to the
    | information on the disk.
    |
    | ( OK )
    I've replaced one of the drives through Seagate RMA and the same thing happens with the returned/refurbished drive. So, I really don't think there's anything wrong with the drives.
    I've tried at least 3 different USB cables of different lengths from different vendors. One is only 1.5feet & gold plated. Still, random ejects. Using the disk attached to an old dual G5 I have... I don't have this problem.
    Anyway, I am thus quite leery of using it for anything other than backups. I've never had the problem while actually copying files, only when I'm doing something else (like typing an email, or browsing the net).
    I recall having read some older Macbook Pro 17" owners having similar issues with >= 1TB drives on these forums [http://discussions.apple.com/thread.jspa?threadID=2151621&start=120&tstart=0] but no solutions.
    If someone can point me to a solution I would be very grateful.
    Message was edited by: phpguru

    @Gizmolab - Thanks for that reply. It seems like a decent theory. I found Seagate Diagnostics for Mac. It says it's only for drives that have a FireWire800 port. The ones I am using have USB only. I installed it anyway. When I run diagnostics it says no drives found so I cannot diagnose them. I'll see how it goes though, maybe it updated the driver.
    To add some more info to this thread... I figured I'd try Disk Utility to manage the drives manually. I've tried dismounting them and also just dragging the volumes to the trash when they are not in use, and using Disk Utility to mount them again when they are needed.
    What I've found is that in addition to the drives automagically ejecting themselves (and remounting again automatically about 20 to 30 seconds later)... is that a dismounted drive will automagically mount, too. Okay fine, I'll dismount them and unplug the USB cables, and reattach them when I need them.
    Disk Utility reports that there appears to be no problems with the disk... thankfully. While typing this reply, I heard the disk go to sleep and about 3 minutes later it just ejected itself dang it. So Seagate Diagnostics appears to be only for Firewire800 drives.

  • On opening after  "sleep" I get a pop up saying "disc was not ejected properly etc. Going on for months! How can I get rid of it, please?  Peter

    On awakening iMac after sleep, I get a pop up saying "The disc was not ejected properly....." etc. Presumably this was a disc of photos or a slideshow I had put onto a disc at some time past.  This has been going on for months. I have inserted and ejected thru Finder all the discs I have, and still it persists. Any ideas of how to get rid of it, please?

    phillashby, if you just upgraded ML to 10.8.5 then the problem may be caused by a bug in the upgrade.  If you look around the forum other people are having the same problem after going to 10.8.5
    I recently upgraded to OS 10.8.5 and now when my iMac (late 2012) wakes from sleep I get the error mesage that my Lacie external thunderbolt raid drive has been ejected improperly. Then it reconnects right away. I will stay away from the sleep mode for the moment.

  • Yosemite "[Thunderbolt 2] disk not ejected properly" after sleep

    Since installing Yosemite, when my Mac Pro comes out of sleep, I get a "Disk not ejected properly" for each disk drive attached by Thunderbolt 2. This all worked fine on Mavericks.
    (I have a similar problem with my dual displays, which again worked fine on Mavericks - I've posted this on a different thread under Mac Pro).
    The manual solution is to physically unplug the drives, but doing this more than 10 times a day is not impressing me.
    Mac Pro 2014, OSX Yosemite 10.10.1, dual DELL U2713HM monitors, La Cie 2Bug Thunderbolt 2

    Not sure how that helps Illaass - that thread is just another question with no answers. It might be an idea if you read the thread before suggesting it?
    There is another thread that suggests a solution (link below), but I've attempted that fix with no success. I also get the "Scheduled Backup Failed" that is mentioned by others.
    Re: Yosemite ejects external drives
    Note that none of these issues happened before upgrading to Yosemite - everything was fine on Mavericks - and it appears as though Apple are keeping quiet on them.

Maybe you are looking for