Ipod not getting recognized by computer or itunes

okayyyy
so after my ipod wiping i connected it to my pc
and it was like
the ipod's in recovery mode you've got to reformat etc.
so i clicked the reformat button but my internet didn't work
so i switched pc's to my brother's (same op system)
but then the ipod wouldn't be recognized by his pc
(even though the connected, do not disconnect screen came up)
so i tried updated his itunes 7 to itunes 8,
but itunes 8 wouldn't open 'cause it says windows can't install it.
does that mean the pc's too old or something?
and what other options do i have to make the **** ipod work?
(and making internet work on my pc isn't an option)

I HAVE THE ANSWER!
If you go into your device manager, is there a little red x or yellow exclamation point next to the necessary drivers?
Right click and select Update Driver Software.
Click Browse My Computer and enter in C:\Windows\System32
Windows will find the iPod and so will iTunes!
YAY for music and stuff!
This took me about a week to unearth, but it was worth it, and I felt it should be shared
~Sarah

Similar Messages

  • Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

    Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

    iPhone not appearing in iTunes

  • IPod not being recognized by computer or iTunes

    This is all of the sudden; I plug my iPod into my computer and - nothing.
    I tried starting and stopping it through My Computer, upgraded iTunes, unplugged and plugged and everything, toggled the Hold button and still nothing. All my iPod is doing is charging.
    Thanks

    I HAVE THE ANSWER!
    If you go into your device manager, is there a little red x or yellow exclamation point next to the necessary drivers?
    Right click and select Update Driver Software.
    Click Browse My Computer and enter in C:\Windows\System32
    Windows will find the iPod and so will iTunes!
    YAY for music and stuff!
    This took me about a week to unearth, but it was worth it, and I felt it should be shared
    ~Sarah

  • How do I unlock ipod when it is not being recognized by computer and itunes

    How do I unlock ipod when it is not being recognized by computer and itunes?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • 30 gig iPod not found in My Computer or iTunes when plugged in

    I just got this iPod the other day for a birthday present from my father. I immediately put some music and video on it and all was fine. I've had it plugged in a few times and it worked perfectly fine again. Last night I tried to plug it in again to put stuff on it and all that happened was the beep you get to let you know that something has been put in the USB. It is not shown in My Computer or iTunes, and there is no USB error balloon popping up. My iPod screen still says do not disconnect when plugged in and it still plays normally when unplugged. I do not know what to do to remedy this problem and I have tried many things and looked up and down the support section of the site, but to no avail.
    Emachines   Windows XP  

    Have you tried assigning your iPod a different drive letter? See these instructions below:
    Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
    Then, put your iPod into Disk Mode, then follow these steps:
    1 - Don’t plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left panel area.
    4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
    5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
    Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod drive letter / Changing drive letter
    If your iPod isn't recognize to assign it a different letter, or the above steps still don't work, then try disconnecting all other USB devices from your computer (other than your mouse and keyboard), and see if you can re-assign your iPod's drive letter works.
    I hope that helps you.
    -Kylene
    If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

  • Ipod not shown in my computer and iTunes

    As I stated before it's not shown in my Computer and iTunes. I called apple supprt and they couldn't help me. At device manager it is shown under usb devices as iPod but with a (!) mark. When I dubble click it it says
    "Driver for this device not installed (Code 28). Click on reinstall driver to reinstall the drivers for this device."
    When I click that it searches and after a while I get a window wich says this:"
    There's a problem with the installation of this hardware:
    [USB LOGO] iPod
    An error occured while installing the device.
    The servicedatabase is locked.
    Click Finish if you want to close the wizard."
    But I did install all software (I got iTunes, Quicktime, iPod updater 2006-06-08)!
    NOTE: It does work on other computers, atleast Macintosch didn't try any pc 'cause I don't have any but this one.
    I did translate the messages, the were originally in Dutch.
    30GB iPod 5G   Windows XP Pro  

    please someone help me!

  • New 3rd Gen. 4 GB iPod Shuffle not being recognized by computer or iTunes

    Hey everyone, I've read some of the other posts here on this thread about other people having problem getting their computer to recognize the new 4 GB iPod Shuffle when plugged into the USB drive, and it seems like I am having a very similar issue. I just received my iPod in the mail a few days ago and tried plugging it into the USB and got NO response whatsoever from my computer or iTunes. I am operating with Windows XP (Service Pack 3) on a Dell Inspiron Intel processor, 2 GHz with 3 GB RAM, with iTunes 8.1 (just updated). When I put something in my USB usually I hear a noise (sounds like DO-do ha) which tells me that my laptop recognizes whatever is plugged in, and usually I get a little box in the bottom right hand part of the screen that says it's been plugged in. I didn't get any of this when I plugged it in.
    When I first opened the box I turned the shuffle on and the light went green for 1 second, orange for 1 second, red for one second, then dead..I suppose this is expected since I figured it's new and needs to be charged, so I turned the shuffle off, plugged the USB into the earphone socket then into my USB, and then turned the shuffle on, and got nothing but the same sequence of lights. It's one thing if iTunes just didn't recognize the shuffle, but I checked the Device Manager and My Computer and the USB drive wasn't even listing the shuffle as being plugged in..maybe the USB cable that came with it is faulty?? I read all of the technical troubleshooting notes on here and tried the 5 R's and nothing is working at all..
    I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!

    GTEagle05 wrote:
    I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!
    According to http://support.apple.com/kb/HT1495
    iTunes for Windows does not support having multiple iPods *connected simultaneously.*

  • Video Ipod 80G 5th generation not being recognized by computer or  itunes.

    My ipod is not being recognized by my computer or itunes at all. I bought a new cable and nothing happens as well. however when i connect it in my car it works fine. did any resolve this issue? I am not sure if its the new software that has the issue but i am almost certain it is.

    Many people are reporting problems with connecting there fifth-gen iPods after the update to iTunes 9. I had the same problem, and when I downgraded to iTunes 8, everything worked again.
    I tried cables, resetting, and all the other steps. My solution turned out to be iTunes 9 itself.
    My problem came from using a replacement hard drive-an adapter that allows me to retrofit my iPod with a Compact Flash card instead of a hard drive.
    The problem is NOT the adapter. This system functioned perfectly until iTunes 9, and when I switched back to iTunes 8, it worked again.
    Summary: I have a modded iPod, and it consistently works with iTunes 8, but not iTunes 9.
    Reason: Apple is sooooooooooo afraid a Palm Pre user will be able to use iTunes that they are breaking the sync code on purpose.
    Downgrading iTunes:
    1. find the download of iTunes 8 for your OS. (not posting links, as they may change)
    2. go into your iTunes 9, and export EVERY playlist to a text file. This is the only way to preserve your playlists.
    3. Uninstall iTunes 9 from you computer, install iTunes 8.
    4. Configure iTunes 8 to use your music folder (especially if you moved your music to a different location other than the default)
    5. Add your music to iTunes-this may take awhile.
    6. Import you text files and your playlists will return.
    7. Backup your iTunes 8 library files.
    Happily enjoy your modded iPod. Mac Users: Don't accidentally install iTunes 9 from an Apple Update.

  • IPod Shuffle (1st gen) is not longer recognized by computer or iTunes

    I have had no problems with my iPod until this morning. I have the latest version of iTunes and recharge my battery pretty regularly on the shuffle. However, this morning my iPod isn't showing up in iTunes or on my USB port. It's not even charging. I tried 4 out of the 5 R's, but can't do the last because the iPod icon isn't showing up. It still plays songs with the battery life left.
    Checked the USB port, and it's working fine. Battery light on shuffle is now red. What do I do?
    Dell Inspiron 6000   Windows XP  

    Hi hmacross,
    I tried one of the options in the link you provided, 'iPod not recognized when connected to Windows laptop over USB'. It didn't work but now my Shuffle is flashing orange as it does when it is charging on my XP machine. So at least we have power to it I think.
    I still have do detection in Windows Explorer, Device Manager or iTunes however.
    All the other options I have already tried.
    Still scratching my head lol.
    Thanks for you help anyway. Got any other ideas?

  • Ipod randomly restting itself and not neing recognized by computer or itune

    My ipod won't show up on my Itunes or windows, and and keeps resetting itself, it won't even charge or anything.

    I have the same problem. So far the only thing that has helped a little bit is I downloaded iTunes 7.0. Mine will at least charge now, but isn't recognized by iTunes or Windows.

  • Ipod not found on my computer or iTunes

    Everything was fine till my brother came with his new iPod. Mine was not named . I just plugged in his and i've been asked for a name . I skipped and continue. Now my own iPod is not recognized by iTunes or my computer. I'm scared to ****. What do I have to do to find it back? Please help me

    Nope, already did that multipule times, my comp reads my iPod fine, its in Device Mag. and Services, but it doesn't show my pod anywhere. "My Computer or iTunes" im just sick and tired of Apple and them being so..... Strict.... about whay you can do with the iPod. I think im just going to get a Vision M and I suggest that anyone else having major problems with their iPod do the same. T
    he Vision M may put a dent in your wallet, but its a great investment and it's been dubed "The iPod Killer," and their right. My friend has beaten his up the wazoo and it's still in better care than my babyed iPod. Plus there are about 100,000 more things you can do with a Vision M than an unreliable iPod.

  • IPod not being recognized by computer or charger

    Well i have a white 60GB ipod video. Never had any problems till last night. When i plugged my usb cable with wall adapter to charge it while i was listening to music, the ipod would not recognize the cable, and said some kind of error like "Unable to recognize firewire component" BUT the USB cable was plugged in, and i do not have firewire. I checked the power adapter, it was USB.
    Now my ipod will not be recognized to charge by the power wall charger or the computer itself. Only thing i can think of is the cable itself has a problem but wnated to check with u guys first.
    I put ipod in disk mode, and that did not solve anything, still unable to be recognized with cable plugged in. Any ideas?

    See the not-charging topic of:
    iPod touch: Hardware troubleshooting
    Have you tried another cable?
    Another charging source? Does iTunes see the iPod when you connect to your computer?
    Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
    BTW, there is not 5G iPod touch. The current one is still the 4G iPod touch

  • Ipod not recognised in My Computer or Itunes

    Just happened since updated to the new Itunes version, ipod works fine but it wont recognise it? any reasons? updated driver as per the support articles but nothing! really annoying me as so much downloaded stuff on there.

    In my case the problem started with latest update (10.01.022). After the update I haven't been able to connect my Ipod 5G or my kids brand new Ipod Touch 4G.
    I have removed Itunes and all other Apples software, reinstalled Itunes+Quicktime. I have disabled and enabled USB Mass Storage in Device manager. Tried with two different cables, 5 different USB-ports... Everything, but nothing helps.
    I noticed also, that normal USB-memory stick doesn't work any more on my computer
    We are not alone with this problem. E.g. google search for:itunes does not recognize windows 64 gives 72300 hits for last week only!!!!
    It is obvious that the Itunes update has a bug, and I hope Apple comes with a fix asap.

  • IPod not showing in my computer or ITunes

    I have had my IPod video 30Gb since Christmas 2005 and have had no problems at all with it until now... The last time I connected it to my PC it just showed the battery charging symbol and it never appeared in ITunes. I am doubly confused because my husband has the identical model (albeit 3 months younger) and his still works fine. I have tried resetting my IPod, using a different USB cable/port, reinstalling software and nothing. I would like to try restoring my IPod but don't know how to do that if it isn't recognised by ITunes.
    Has anyone else had this problem; if so how did you solve it?

    Hey!
    Have you seen this yet.....
    iPod is missing in My Computer or in iTunes
    Cheers
    John
    iMac G5 1.8GHz 20"   Mac OS X (10.4.7)   ipod 30GB Video Black v.1.2 Agent 18 Case iTunes 7.0.1 Bose Sounddock
    iMac G5 1.8GHz 20"   Mac OS X (10.4.7)   ipod 30GB Video Black v.1.2 Agent 18 Case iTunes 7.0.1 Bose Sounddock

  • Ipod touch not being recognized by computer or itunes on PC but is on laptop

    I have an older ipod touch that is able to be recgonized on my windows 7 laptop but not on my windows XP PC.  What can I do to have the pc recognize it ipod touch?
    Thanks,
    Mike

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Req:Download of purchase order item details using normal ALV

    Hi all, Can we display the output as script form by using function module reuse_alv_grid_display_lvc.

  • Advice on best practices on book proof stages

    I'm wondering how others go about book projects when you move from one proof to the next, in the context of using InDesign's book panel to manage your project. I create a first proof in InDesign, send PDFs to contributors, and they approve or give me

  • How to use RMI Stub class in programming?

    Hi all, I'm new on RMI. Is there anyone can explain to me how to use RMI Stub class which is generated by invoking rmic command? For my testing, I can only invoke rmi object nethod via its remote interface. Then what is stub used for when we are codi

  • Unable to set default fonts n style in Cisco Jabber

    Unlike CUPC or WebEx Connect, no option is currently available under File -> Options for both Cisco Jabber for Windows (On Prem or Cloud deployement) to configure and set default font/size/style for Jabber.

  • Message type NEU in POs

    Hi, how can I set SAP so that it will create automatically two message type NEU one in italian and the other one in english ? Regards