IPod not recognized by iTunes & Disk Utility - Recognized by System Profile

I have a 40GB iPod Clickwheel (4th Gen?) that i'm trying to fix back to life since my mini was just stolen and i'm out on the road on tour all the time. my iPod actually powers up by itself just fine, the battery life is just peachy, and it can run independently without songs (i'm able to look around just as though i had songs on there - i can play games, alter settings, etc etc.).
However, there's a few things i've noticed!
When i go to the iPod's about menu (when disconnected from the computer), it shows there's no songs, that there's 0 capacity, 0 available - shows that the version is 3.1.1, the serial and model numbers, but the format is unknown.
I've tried plugging the dang thing into my computer to much avail - IF iTunes recognizes it, it says it needs to be restored -- GREAT! so i try to restore the iPod, however, i almost instantly get an error: The iPod cannot be restored because it is currently busy. When i clicked the help tag, it says it's a common problem in iTunes 7.0 - great, i have 8.0.2; and i've tried running everything from a restart on the ipod to a restart on the computer, updating all my system files, running the iPod in disk mode, etc, but nothing seems to make it want to restore.
when i look in system profiler; it shows that the iPod is hooked up to my USB port (which is just fine, and i've never had problems running a click-wheel iPod through that before); however both Disk Utility and iTunes do not acknowledge it's existence. what gives?
is my iPod a goner? how would i go about restoring this so i can use it? I've tried it on my Power PC (Specs below) as well as trying it on an iBook and iMac; with the same results every time. i know it's not the cable, because the iPod actually charged via that cable last night!
any help!?

If you can get it to show up in Disk Utility, try reformatting (erasing) it in Disk Utility. If that process completes without stalling or errors, quit Disk Utility and run iTunes. Immediately attempt to do another Restore to install the iPod's software and initialize.
If the iPod does not erase successfully (it should take less than one minute for a standard erase) in Disk Utility, the iPod's hard drive may be faulty.

Similar Messages

  • IPod Touch not showing up in Disk Utility

    Hello,
    As my title says I can't get my iPod to show up in disk utility. It will show up in my iTunes fine, and works great but for some reason when I bring up Disk Utility, nothing shows up, as if it's not plugged in.
    Thanks,
    Chris Kefalas

    Chris Kefalas wrote:
    So my next thing to try was to take an image of Snow Leopard that I have, and put that onto my iPod touch and then boot off my iPod touch, and install it that way since my disc drive isn't working...
    i wouldn't even consider doing that with an iPod classic. instead, i would get a cheap USB drive (better yet, a firewire drive), use *disk utility* to restore the image of the SL install disk to a small (10 gig) partition there, and boot from the external.
    you could also use another Mac to do a *remote install*. click here for information.
    yet another option, again involving another Mac, is to enable *remote disk*:
    The CD/ROM in my computer busted, so I decided to try to remotely mount the CD from another computer on mine. I know the MacBook Air can do this, so I reasoned that any Mac could. It turns out it is possible, but the solution is far from obvious -- after much searching, I found the solution here.
    Here's a quick synopsis. Go to System Preferences » Sharing, and enable 'DVD or CD Sharing.' (I think you need to do this on both machines -- the one with the drive and the one without the CD/ROM drive). Then, on the computer that does not have the CD drive on it, go to a Terminal window and enter:
    $ defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true
    $ defaults write com.apple.NetworkBrowser ODSSupported -bool true
    Reboot this machine, and when the reboot is finished, you'll see the remote CD/DVD under Devices in the Finder's sidebar. Thereafter, you can remotely mount a CD/DVD from another machine.
    JGG

  • Western Digital drive not showing up in disk utility--Help please.

    Hello all. This is my first post. I am having trouble with my WD 500GB external hard drive. It is not showing up in disk utility when connected either via the firewire or USB ports. I purchased the drive about 8months ago, brought it home and set it up as my Time Machine backup drive. It worked great for several months, until it got full. Then it stopped showing up on the desktop for no apparent reason. I discovered through reading support documents on the Apple web site that when I set the drive up initially I should have changed the partitioning protocol from master boot record to GUID, but I did not. I followed the apple web site instructions for making the change expos facto, but was instructed to press buttons that were "grayed out". As such, I couldn't do it. Perhaps foolishly, I thought that I would just start all over by reinitializing it, formatting it correctly (with my new found knowledge) and then do the time machine backup fresh. However, the drive no longer shows up in disk utility no matter how or in what order I connect it. When the drive is connected by firewire there is evidence of some recognition of the drive in system profiler, but it is listed as "External HDD Buttons and Lights". There is also evidence of the My Book showing up at a minimal level (eg. the firmware revision and a few other details are listed). On the front of the drive is a ring of blue lights that progress in a clockwise direction as soon as a connection is made via either firewire or USB. Before that it is solid blue. I have read through all the info that I can find on this site, and all the suggestions require the drive being recognized in disk utility. Without that, I am stuck. I know this must be a solvable problem, because the drive just a bucket of parts before it was manufactured. I just don't know enough to solve the problem or even know what qeustion to ask. I would really appreciate some help. Thanks in advance, and sorry for the long post.

    If you can't boot from an OSX DVD, it sounds bad. Yet I think you said you were running Disk Utility from the DVD?
    I got an external Firewire drive enclosure for 2.5 inch IDE drives from Other World Computing (OWC)
    http://eshop.macsales.com/item/Other%20World%20Computing/MOTGFW400/ but similar items are available from many vendors like Newegg. About $60 for the basic model. More money can buy additional interfaces on the enclosure like FW800 and USB2; an AC adapter instead of letting the firewire bus power the drive (usually OK).

  • SD Card not mounting with Yosemite, Disk Utility Yes, Finder No

    Hi Everyone!
    mid-2012 15" rMBP
    2.7 GHz i7
    16 GB 1600 MHz DDR3
    Yosemite 10.10
    Installed Yosemite about 2 weeks ago.  So far things have been fine.
    Just this morning tried reading a Nikon formatted Sony Class 10 (40MB/s) 16 GB SD card through the internal SD card reader - and nothing happened.  After some poking around I noticed that the SD card is recognized by both the Disk Utility and the System Software, but not by Finder.  The SD card will not mount.
    It is not the SD card because it will mount on my buddies MBP running Mavericks (I had to upload the photos through Dropbox off his MBP).
    I have already tried resetting both the PRAM and the SMC - it did not change anything.  The system would still not mount the SD Card.
    Here is the interesting thing.  I have taken an old Class 4 8GB SD card which also wasn't being recognized and using Disk Utility, reformatted from MS DOS FAT to EXFat.  Now Finder will in fact mount the drive.  However, my Nikon or other devices will not accept an ExFAT formatted SD Card.
    Check this out:
    Anyone have any ideas?
    THANKS IN ADVANCE!!!

    Re: SD Card not working on Yosemite
    Reset NVRAM/PRAM
    Reset SMC

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • Ipod not appearing on itunes or mac desktop

    Hi! I own a 160g ipod classic. What is happening is I plug it to my macbook pro and it sits there thinking for a long time, after which two dialogue windows appear, one that says the device was ejected incorrectly and then another one that says that the ipod could not be synced because it could not be found. Then the ipod freezes on the do not disconnect screen and I have to reset it in order to get it going again. Can anyone help me?? PLease!! I'm in charge of music for New Year's Eve! Thanks so much!!

    Hey catarjona81,
    The following article contains links to troubleshooting steps you can take for that issue:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Welcome to Apple Support Communities!
    Cheers,
    Delgadoh

  • I want to import songs frm my Ipod to my itunes library.  Songs were ripped from CDs to the ipod not purchased from itunes store...how can this be done?

    I want to import songs frm my Ipod to my itunes library.  Songs were ripped from CDs to the ipod not purchased from itunes store...how can this be done?

    You would have to let itunes rip the songs from the cd's, or you would have to copy the music from the computer which ripped cd's.
    iTunes does not support transferring music from the ipod unless it was purchased from the store.

  • How can I transfer the music in my old Ipod classic to a new Ipod, not only the Itunes purchases?

    How can I transfer the music in my old Ipod classic to a new Ipod (not only the Itunes purchases)?

    You'll need to copy the music from the old iPod back to iTunes first before you can transfer it to your new iPod. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Ipod not appearing on itunes and windows

    ipod not appearing on itunes and windows i have tried reinstalling itunes and nothing works

    Hello there. Maybe this support article will assist you.
    http://support.apple.com/kb/ts1538
    Cheers

  • Ipod not appearing on Itunes, Ipod not appearing on Itunes

    Ipod not appearing on Itunes...Please Help

    It would be best to post your question in the general iTunes forums. This forum is for those administering iTunes U sites, so it's not the best place to ask general iTunes usage questions (which is probably why the original question has gone unanswered).
    Regards.

  • Ever since the ios5 update some of my ipod songs come out as duplicate and only on my ipod not on my itunes why is that? how can i fix it?

    ever since the ios5 update some of my ipod songs come out as duplicate and only on my ipod not on my itunes why is that? how can i fix it?

    Hey Ryan, When you looked at Get Info as Illaass instructed did you compare all the info listed in iTunes Get Info on the computer's copy? When you looked at the song(s) that are separated, do they list anything different like a featured artist? Or a different composer / song writer? Sometimes that will trick the the software into thinking it is 2 different albums. Make the info about the album and artist match, then sync to your iPod. The songs should go back where they belong on your iPod. Good luck. Cheers.

  • I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created.

    I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

    I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

    Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
    You need to mount the sparsebundle then check the actual info inside the bundle.
    Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
    Pondini has a lot of stuff about getting access to the sparsebundle.
    http://pondini.org/TM/17.html
    But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

  • Ipod Classic Re-Formatted In Disk Utility Not Being Recognized

    I last posted about this question 4 months ago on this forum and still havent received an answer that works. My Silver Ipod Classic 80GB was used to update the OS on my computer. Foolishly I partitioned the disk on it using disk utility and updated my computer. After i tried to erase the partition the ipod stopped being recognized as an ipod on my mac running OSX. It is recognized as a hard drive. I formatted it with Mac OSX extended Journaled in disk utility and nothing seems to work. When i plug it in itunes auto starts and pops up but the Ipod simply doesnt show up in the side bar. I have tried it on all different macs and windows computers and it still wont be recgonized on the mac. On the windows machine i am able to reformatt it so it works with a PC but when i plug it into a mac itunes autostarts and it still isnt recognized as an ipod
    help would be greatly appreciated

    i dono man, but I have exactly the same prob. if u wouldn't mind letting me know if you figure it out I will be happy to send u a quick message if I figure it out first
    thanks

  • Ipod Shuffle Not Showing Up in Disk Utility, Finder, or iTunes

    Aaaaaarrrrrrggghhhhhhh!!
    Until a few days ago, this 4th gen shuffle used to work fine re. syncing with iTunes on both my iMac and MB Pro (Mavericks & iTunes udated to most current).  Now it won't show in either machine, anywhere; not inDisk Utility, FInder, or iTunes - nor even in System Information, USB (as far as I could interpret those screens). 
    It takes and holds a charge when plugged into an outlet, and plays fine... I've charged it fully before plugging it into the computer(s), and have tried it with the iPod turned off, and on.
    I've searched these forums, but don't see an exactly similar situtation described, or solved.
    Any tips out there?
    Thanks.

    Howdy sdpg,
    It sounds like your iPod isn't being recognized in any way on either of your Mac computers. Normally if this issue is happening on more than 1 computer, it's either to do with the device itself, or the USB cable being used. I would start by using a differnet USB cable if you can. Then I would use the troubleshooting in the following article to help troubleshoot the computer(s), named:
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    If the issue persists, then use the troubleshooting in this article to troubleshoot the iPod itself if needed:
    iPod shuffle not appearing in iTunes
    https://www.apple.com/support/ipodshuffle/assistant/itunes/
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for

  • 32" LCD Monitor - Best Resolution???

    Hello all - I just bought an Olevia LT32HVE LCD monitor to use with my G5. I'm wanting to find the best resolution setting so that it won't be horizontally whacky, yet still a good amount of real estate on the screen. At the recommendation of a frien

  • How do I extract audio from a clip?

    I've tried to select a clip in the timeline then go to clip/audio optins but audio extract is always grey...  I'm trying to pan audio into the next clip.

  • What i can do with my mac air when says error 45054?

    i try buy a movie in itunes on my mac air and say error 45054.what that mean?

  • Odd Shutdown, changed Date and Time

    When I opened my Mac today, it didn't turn on which I found a bit odd, but I figured the battery had simply run out. I plugged it in, pressed the power button. It went to a grey screen for several moments, then loaded the Apple symbol, grey screen ag

  • Can a device be authorized with multiple accounts ?

    Hi There, Can anyone answer this question  ? My Sony PRS-300 reader is authorized with adobe account X A PC is authorized with adobe account Y Now I want to get an Adobe protected eBook on PC (account Y) on my device (account X) Adobe digital Edition