Ipod out no longer works with iOS 6.1

As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
Now, all I get is a constant "Reading" indicator and can't get past this point.
Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
Thanks

Try this.
Go to Settings>General>Date and Time>Set Automatically>Off.
Set the date one year ahead. Try to get email.
If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

Similar Messages

Active Sync certificates no longer work with iOs 4.3

Existing Active Sync certificates no longer work with iOs 4.3. Can I fix this?

My results differ from yours.
With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

TS2755 Messages no longer works with iOS 6.

Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att take techline 15 minutes and imessage and text messages working ok

All of a sudden, my 4th gen iPod Touch no longer works with my Apple TV, has Apple "upgraded" something to kill off this older unit? (IOS 6.1.2)

All of a sudden, my iPod Touch (4th gen, IOS 6.1.6) no longer works with Airplay on my Apple TV. It was working and still works as a 'remote' but not with Airplay which seems to indicate I've been abandoned by the message that pops up on the screen saying in essence "too bad you don't have IOS 7.1".

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

TS1591 my ipod touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM

touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM

Did you fail transfer all purchases to your computer before attmeoting to update? not good. ''You can redownload some itunes purchases in some contries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You will need to restore. If you are unable then read this:
iOS: Unable to update or restore

IPad 2 hdmi connector no longer works with iOS 7.3

Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror. Running ios 5 the mirroring worked perfectly for sound and video. Don't remember if I tried while running 5.1. Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV. When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected. I have sound and video working fine except for the colors. The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync. I have changed the hdmi to a new one, but it didn't help. I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV. Leads me to believe it's an issue with the TV OUT function of the ipad. I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

IPod Touch no longer works with car stereo after 4.0 update

I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

AirPrint no longer works with ios 5?

I can no longer print from my print app print n share. I used this app to
Print my "drivers log book" app. Tech support from print n share said
Apple took away the feature to print through all print apps that send wifi
Straight to the printer. Why would apple do this?

It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers. Here's a fix that works on my imac, but should also work on even a windows pc.
My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
Install ubuntu 11.10 in a virtualbox vm. Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware. Make sure the imac's usb printers are setup with sharing. On ubuntu, select System Settings > Printers and add your imac's shared printers to the list. Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it. Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
references:
http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

Ipod touch no longer working with isimple device?

I have a 4th gen Ipod touch that was working just fine with my isimple device in my vehicle until I believe I updated the ipod to the latest firmware. I now recieve a message saying device is not compatible with Ipod, Is there anyway I can rollback to the previous version which I believe was 6.1.2? Thanks!!

Downgrading the iOS is not supported by Apple.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Go to the devices support site and see if they have anything. Maybe a firmware update is available. Otherwise you will have to wait for a firmware or iOS update.

IPod Touch no longer working with car Head Unit since update

Hi there, I have a problem with using my iPod Touch with my car's head unit.
I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

IPod 4 no longer works with speakers as of IOS 6

I own both an iPod 4th gen iPod Touch and a Logitech docking system. My brother owns an iPod 3rd gen iPod and a similar logitech docking system.
My iPod worked fine with my dock until I updated it to IOS 6. I found that it could charge but would not play music through the speakers in the dock. I thought that this was a problem with the dock, but my brother's iPod worked fine with my dock as he was not running IOS 6. I tried my iPod on his dock and found the same result. Clearly there is no problem with the dock itself, but my iPod. Why has IOS 6 made it completely incompatible with my dock?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If not successful that means that the IOS update broke compatibility, Since the 3G and 4G iPods has difference hardware, there are some differences in the iOSs for the two model iPod.

Why does my iPod Nano no longer work with JVC TH-BC3 dock?

I have a JVC TH-BC3 soundbar with a built-in iPod/iPhone dock. My iPod now displays a "non-compatible" message on the screen when I when docked in the TH-BC3. What is the problem?

I sent the question to JVC's support desk and they sent the following reply -
Thank you for contacting JVC Customer Care. My name is Veronica, your email care specialist. We value you as a JVC customer and appreciate the opportunity to be of assistance.
I understand you are experiencing difficulties with your JVC TH-BC3 recognizing your iPod Nano. We do apologize for any inconvenience that this may have caused. What generation is your iPod Nano? By any chance have you recently updated the iOS? If so, it may just require a soft reset. Simply press and hold the Menu and Home button until the Apple logo appears. This will not erase any information on your iPod/iPhone, simply reboot the software. Please make sure the iPod/iPhone is not connected to the unit while performing the soft reset.
I performed the soft reset and tried my iPod Nano in the dock and it now works!

IPod Touch no longer working with Nike after 4.3.2 update.

I updated to 4.3.2 about a week ago and immediately afterwards my itouch was not able to pick up the Nike+ sensor when initiating a run (during the "walk around to start the sensor" part). I even went out and dropped 20 bucks on a new sensor at Best Buy because my initial thought was the battery died since I've been using it for about 2 years. When I went to pair the new sensor I was surprised to see the itouch finding "multiple sensors" and still pickign up on my old one, so I had to go to a seperate room to pair the new one. I thought all was right in the world, but the next morning again it would not find the signal to start the workout.
I also did a factory reset, but still nothing.
What's going on? Is anyone else having this problem or is it just me?

I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

Airplay no longer works with IOS 7.0.3?

I have uploaded IOS 7.0.3 to my I-Pad but now Music does not offer Airplay through my Airport Express and music system as it used to - is there any fix? Airport Utility shows a good connection and Airplay is enabled. The system works OK with my MacBook Pro

If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay

Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
If it is just this version of iOS, I do hope that it is fixed in 8.1.

The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
Compatibility
Questions about compatibility?
Call
0800 048 0408 or Chat now
iPad models
iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
To sort the iPad suggest you restore the device especially if you did the update ovrer the air

Ipod out no longer works with iOS 6.1

Similar Messages

Maybe you are looking for