IPod recognized on one PC, but not on another

Hi!
I just received a brand new iPod Click Wheel 20GB in exchange for my old one that had a hardware defect within the warranty period.
When I tried to connect the device to PC1 (WinXP) which I had always used with the old iPod without any problems, the new iPod was discovered in Windows, but not in iTunes, although the diagnostics feature in iTunes showed the iPod connection with a green "light".
I removed all other USB devices, re-installed iTunes 7.0.2. twice, reset the iPod a few times and also put it into disk mode. After some attemps, it was recognized by iTunes and started to synchronize songs (which are both imported from original CDs and purchased from iTunes). However, synchronization took a lot longer than it used to with the old iPod (approx. one song per minute now compared to one song per 5-10 sec. before). After some time (3GB in first try, 7 GB in second try) an error code ("1-24") was displayed and synchronization (which should have been 18 GB in total) stopped.
The next thing I did was to try to connect the iPod to PC2 (again WinXP), first using an older version of iTunes and a different library. It worked without problems. Then I upgraded iTunes to V.7.0.2. and it still worked. Then I copied the iTunes library from the PC1 to PC2 and again, it worked.
In connection with copying the iTunes library, another question emerged: I copied all folders unter \iTunes\iTunes_Music from PC1 to PC2. Strangely, only 1,500 songs were copied on PC2, while there are over 3,000 songs on PC1. I compared the directories in detail and found out that there were artists with and some without their own directory, which might be the reason for the difference, as songs of those artists had not been copied.
Hence, my questions to the community are:
- What could I do to make the connection of my iPod with PC1 work like it did with the old iPod and like it does on PC2?
- Where is the rest of the songs/artists that do not have a seperate directory?
Thanks for your help, cheers, Boern.

I have the same kind of problem. I installed the ipod on one comouter in my house, dont know what version of itunes but i dont think the latest one and registered it, then I installed it onto this pc with the latest version of itunes and windows dosemt recognise it. It makes me insall drivers like five times and sends me loads of messages saying things like it is installed and ready to use one minute, then found new hardware the next. And even now after I have installed everything and I dont get the messages anymore it still dosent come up in 'my computer.' Does anyone know what the problem could be?

Similar Messages

  • IPod recognized by one Mac but not another

    I have a fourth-generation iPod. My home computer, which has stopped recognizing my iPod, is a PowerPC G4 running 10.4.11. My work computer, which does recognize the iPod, is a 20-inch iMac (whose specs I don't recall). All software is up to date on both Macs, and I've tried resetting my iPod as well as putting it into Disk Mode to try to fix the problem at home. No dice.
    The only thing I can think of that might have affected it is my recent problem with my home Mac's sleep function -- that being, simply, that my Mac doesn't go to sleep when I select it from the pull-down menu.
    Could I have affected the iPod by putting my Mac to sleep while it was attached? I've done it many times before without any problems. Or, is there an improper way to wake up the Mac while it is sleeping? Could the iPod be thinking that my Mac is still asleep?
    I've also noticed that my home Mac takes longer to boot up and shut down since these problems (iPod, sleep function) developed.
    But, again, the iPod works fine with my work Mac.
    Needless to say, I am flummoxed. Thanks much for any insight!

    Do you use FireWire or USB to connect the iPod?
    If USB, try disconnecting ALL of your peripheral devices including any hubs, except for a standard keyboard and mouse. Try the iPod connected directly to the Mac's USB port. Be sure to try more than one port.
    If FireWire, make sure it is connected directly to the Mac's port instead of daisy chained to an external drive or connected to a FireWire hub. Try it on more than one port, since it is possible the port has become faulty. If you have another FireWire device, use it to make sure the port is OK.
    If the Mac itself is running oddly, you need to start up from your Mac OS X installation disc (for the OS version you are using), and run Disk Utility from Installer's menu. Then run +Repair Disk+. If that completes with no errors or errors that are repaired, restart normally. Then run Disk Utility and use +Repair Disk Permissions+. Hopefully, those actions will fix the Mac.

  • Airplay works for one user but not for another on the same machine

    I have the problem where airplay works for one user but not for another and both users are on the same machine.  For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted.  I have tried restarting the Airport express, restarting iTunes, repairing disk permissions.  Any ideas about what can be done to resolve this?

    my /etc/group:
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,hans,ibm,gast
    ftp::11:
    mail::12:
    uucp:x:14:
    log::19:root
    locate:x:21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:
    audio::92:ibm,gast
    optical::93:hal
    floppy:x:94:hal
    storage:x:95:hal
    scanner:x:96:
    power:x:98:
    nobody::99:
    users::100:gast
    dbus:x:81:
    hans:x:1001:
    vboxusers:x:108:hans
    policykit:x:1002:
    hal:x:82:
    kvm:x:78:
    nx:x:85:nx
    avahi:x:84:
    camera:x:97:
    gdm:x:1003:
    gast:x:1004:

  • Ipod works on one computer but not the other?

    Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Patrick

  • Call customer-subscreen causes dump in one box but not in another box

    Hi guys,
    Just wondering if anyone here encountered this situation before and knows of any explanation or solution.
    There's two development boxes with a program that contains the following code/statement:
    call customer-subscreen SSCR903 including 'SAPLXXXXXX' '2000'
    SAPLXXXXXX happens to not exist in both boxes. In the first box, when execution reaches that statement above it will generate a dump saying that 'SAPLXXXXXX doesn't exist'. But in the second box, when execution reaches that statement above it won't generate a dump and execution continues to the next statement in the program.
    I checked SAP documentation on the CALL CUSTOMER-SUBSCREEN keywords, but I didn't find anything that would explain why it dumps in the first box, but not in the second one.
    Anyone encountered the same situation before? Any explanation why it's dumping in one box, but not in the other box?
    Thanks in advance for any help.
    Kind regards,
    Carl

    Welcome to sdn.
    Abap doesn't check existence of the dynpro, it only check activation of the exit in CMOD, that may explain the, difference.
    Regards,
    Raymond

  • IPod Corrupt in one Computer but Connect to Another

    My 30GB 5th Gen Video iPod recently would not connect to my Windows 7 desktop. It freezes iTunes, but gives no message. If I unplug the iPod, iTunes then gives a message saying the drive is corrupted and asking if I want to reformat. Since the drive is disconnected, there is nothing to be had so I click okay and it returns me to my music library no problem. The odd thing is, I can plug my iPod into my Windows 7 laptop and it reads just fine with no error messages. I do not want to lose the data on the iPod as it has stuff not contained in my current library and this working in one system and not in the other, though it worked in the desktop up until a week ago, is just odd behavior. Any thoughts?

    If you have more then one USB port, try the other port.

  • Oledb working in one place but not in another

    I have two examples accessing the same table in my oracle database. Whereas code in example 2 always working , code in example 1 worked initially but after that failing with the following error.
    Please help me as to why I get table or view does not exist error in one case but working fine in other case when I use the same table in both examples?
    This post is organized as
    A) the error
    B) Code which contributed the error (please note this code worked initially , later started to fail without any modification at all).
    C) Code which is working fine also using the oledb provider and using the same table in the database.
    A) the error
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Data.OleDb.OleDbException: ORA-00942: table or view does not exist
    Source Error:
    Line 14:      
    Line 15:      dim ds as DataSet= new DataSet()
    Line 16:      objCmd.Fill(ds, "HR.tblPeople")Line 17:
    Line 18:      MyDataList.DataSource=ds.Tables("HR.tblPeople").DefaultView
    Error Complete
    B) Code which contributed the error 'Table or View Does not exist'
    <% @ Import Namespace="System.Data" %>
    <% @ Import NameSpace="System.Data.OleDb" %>
    <Script language="VB" runat="server">
    Sub Page_Load(obj as Object, e as eventargs)
         dim objconn as new OleDBConnection _
         ("Provider=OraOLEDB.Oracle.1;Data Source=bora9i;" & _
         "User ID=Sssss;Password=aaaaa;" & _
    "Extended Properties=;Persist Security Info=False;OLEDB.NET=True;")
         dim objcmd as new OledbDataAdapter _
         ("SELECT * FROM HR.tblPeople" _
    & "ORDER BY LastName, FirstName",objConn)
         dim ds as DataSet= new DataSet()
         objCmd.Fill(ds, "HR.tblPeople")
         MyDataList.DataSource=ds.Tables("HR.tblPeople").DefaultView
         MyDataList.DataBind()
    End Sub
    </Script>
    <HTML>
    <BODY>
    <Asp:DataList id="MyDataList" RepeatColumns="2"
         RepeatDirection="Vertical" runat="Server">
         <ItemTemplate>
              <div - style="padding:15,15,15,15;font-size:10pt;
              font-family:Verdana">
              <div - style="font:12pt Verdana;color:darked">
              <i><b><%# DataBinder.Eval(Container.DataItem,"FirstName")%> 
              <%# DataBinder.Eval(Container.DataItem,"LastName")%></i></b>.
              </div>
              <br>
              <b>Address: </b><%# DataBinder.Eval(Container.DataItem,"Address")%><br>
              <b>CompanyName: </b><%# DataBinder.Eval(Container.DataItem,"CompanyName")%><br>
              <b>Email: </b><%# DataBinder.Eval(Container.DataItem,"Email")%><br>
              <b>Webpage: </b><%# DataBinder.Eval(Container.DataItem,"WebPage")%><br>
              <b>HomePhone: </b><%# DataBinder.Eval(Container.DataItem,"HomePhone")%><br>
              </div>
         </ItemTemplate>
    </Asp:DataList>
    </BODY>
    </HTML>
    C) Code which is working fine also using OleDb provider and using the same table
    <% @ Page Language="VB" Debug="True" %>
    <% @ Import Namespace="System" %>
    <% @ Import Namespace="System.Data" %>
    <% @ Import Namespace="System.Data.OleDb" %>
    <html>
    <head>
    <title>Contact Manager: View All Contacts</title>
    </head>
    <body bgcolor="#FFFFFF">
    <h1>View All Contacts</h1>
    <table cellpadding="4" cellspacing="0" width="100%">
    <tr>
    <th>Name</th>
    <th>Title</th>
    <th>Company Name</th>
    <th>Work Phone</th>
    </tr>
    <asp:label id="lblOutput" runat="server"></asp:Label>
    </table>
    </body>
    </html>
    <script runat="SERVER">
    Sub Page_Load(Src As Object, e As EventArgs)
    Dim sqlConn As New OledbConnection
    Dim sqlCmd As New OledbCommand
    Dim sdrData As OledbDataReader
    Dim sb As New StringBuilder
    sqlConn.ConnectionString = _
    "Provider=OraOLEDB.Oracle.1;Data Source=bora9i;" & _
    "User ID=Sssss;Password=aaaaa;" & _
    "Extended Properties=;Persist Security Info=False;OLEDB.NET=True;"
    sqlConn.Open()
    sqlCmd.CommandText = "SELECT * FROM HR.tblPeople " _
    & "ORDER BY LastName, FirstName"
    sqlCmd.CommandType = CommandType.Text
    sqlCmd.Connection = sqlConn
    sdrData = sqlCmd.ExecuteReader()
    While sdrData.Read()
    sb.Append("<tr>" + vbCrLf)
    sb.AppendFormat(" <td>{0}, {1}</td>" + vbCrLf, _
    sdrData("LastName"), _
    sdrData("FirstName"))
    sb.AppendFormat(" <td>{0}</td>" + vbCrLf, sdrData("Title"))
    sb.AppendFormat(" <td>{0}</td>" + vbCrLf, _
    sdrData("CompanyName"))
    sb.AppendFormat(" <td>{0}</td>" + vbCrLf, sdrData("WorkPhone"))
    sb.Append("</tr>" + vbCrLf)
    End While
    sdrData.Close()
    sqlConn.Close()
    lblOutput.Text = sb.ToString()
    End Sub
    </script>

    Hi Srikanth,
    1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
    dim objcmd as new OledbDataAdapter _
    ("SELECT * FROM HR.tblPeople" _
    & "ORDER BY LastName, FirstName",objConn)
    2. use
    Dim ds As New DataSet()
    Sinclair

  • Beta user on one computer but not on another

    I have Beta version 16.0 on one computer on one computer but on another computer its regular version 15.0.1. Bookmarks are not synching. How do i get both versions the same?

    Do you have [[Firefox Sync - Take your bookmarks, tabs and personal information with you|Firefox Sync]] setup? If so and it is giving you problems, please check [[Firefox Sync troubleshooting and tips]].
    Please tell us if this helped!

  • Visa class conflict on one PC but not on another

    Hello
    My problem is, that vi's (LabVIEW-drivers for the data aquisition unit
    34970A, but also any self-created) with VISA functions doesn't work on
    one PC, but on another PC (with the same LabVIEW version 6.0 and the
    same operation system Windows 2000) they do.
    The reason why it doesen't work on one PC is a class conflict between
    VISA resource name control and the VISA function block (read, write,
    On the PC with the problem also a framegrabber-card is installed. May
    this cause the problem? Or maybe any other software?
    I haven't installed any HPIB or other drivers for the data aquisition
    unit on any PC. But also when I install the driver, the problem isn't
    solved. (I tried both ways.)
    Thanks for help, Florian.

    That is a great suggestion. Make sure you have the full NI-VISA driver installed. You may also want to check to see if that VISA resource is listed in MAX. Even though the software is present, you communication line may not be detected.
    You can open up the VISA Alias Editor to find which resource names exist on your computer. Then you can use the VISA Interactive Control to actually test the VISA resource. Open the Interactive Control from Tools>>NI-VISA>>Interactive Control. Double-click the resource name of your device and select the Basic I/O tab on the panel that appears. This allows you to write to and read from your device to test if VISA works with it at all.
    Testing with these two utilities should give you some more information about what is goin
    g on in your system.
    J.R. Allen

  • Send Mail attachment to one recipient but not to another?

    In Mail 4.5, how do I send an attachment to the main recipient but not to the carbon copy recipient?

    Thanks, Bob. I realized only after I posted (this is my first post ever) that someone had answered my question previously but my search had not revealed the answer. I understand now the limitation of Mail--only one message goes to the outgoing server regardless of number of recipients, and the attachment is part of the message. Thanks again for your help.

  • Office 2008 Setup Assistant Loop for one user, but not for another

    I just upgraded my MacBook Pro to a MacBook Air and migrated everything across using Migration Assistant via WiFi.
    Seems to have gone fine but found that my wife can't get any Office 2008 apps to start up. Word, Excel, etc start up in my account without a hitch but when we try to start any Office app in wife's account the Setup Assistant pops up, asks if we'd like to participate in feedback, then asks to choose to register or learn more. No matter what we choose the Microsoft Updater pops up and prompts to check for updates after this the app closes. We are forever in this loop of trying to open an Office app, checking for updates and then the app closing down. And the app closes even if I quit Setup Assistant and/or Microsoft Updater.
    I've tried dumping various plists but not luck.
    Any help in resolving this would be much appreciated.

    Another copy of this question turned up a couple of weeks later and has been answered. Basically, you have to reinstall Office 2008 from the original media.
    https://discussions.apple.com/thread/3645235?start=0&tstart=0

  • HT1937 my cellular data connection works in one location but not in another

    Why does my iPhone's data connection work at other places but not at work?
    It works sometimes.

    Good question to ask your cell phone provider.. Maybe the material the building is made of is blocking the cellular data signal.

  • Missing Benefit Plan in HRBEN0001 in one client but not in another.

    Hi All,
    I was wondering if anyone has stumbled upon this issue where your benefits configuration are identical in three clients.  I have configured two savings plans - 401K and Roth which the employee is allowed to make changes anytime.  In two DEV clients, I was able to see both savigns plan in HRBEN0001 and 401K in QA but not the Roth.  I've compared the configuration and the dates and they are correct (and identical). 
    I went back into QA and hired a new test employee and the Roth plan appears in HRBEN0001.  My question is: why didn't the Roth plan appeared for the employees that were previously hired.  Is there a table that needs to be activated in QA? 
    Your help is much appreciated!  Thanks!

    Hi Donna,
    Could you please tell how did you resolve this issue as I am facing same problem. I have configured 3 pension plans which are not reflecting under HRBEN0001. Appreciate your help.
    Regards,
    Purnima

  • GarageBand - Controller's Foot Pedal (in AUSampler) works for one track but not for another

    I am learning how to use AUSampler in GarageBand. I am using a MIDI controller (Alesis Q88) with a foot pedal for the sustain.
    The sustain works with the default sound in AUSampler (Sine 440), but not for a sound that I imported. Also, my imported sound plays longer the lower the keys played, and the higher up the keys the faster it plays. Either way, it doesn't allow sustain, but yet the default sound does.
    I know where the Controller / Sustain Pedal area is within the Piano Roll but that doesn't fix my dilemma.
    I presume my problem is related to the viola sound I imported (wav format), or the way I need to set something up; I hope the latter.
    Any clues?
    Many thanks in advance.

    HI Bob,
    You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
    Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
    208.67.222.222
    208.67.220.220
    See if that helps.
    Carolyn

  • Previously working ipod recognized by some software, but not others

    I've got an 80GB Classic, which has served me well for years. I've currently got it formatted for PC. Today, I got the "cannot read ipod contents" popup in iTunes when I plugged it in. Interestingly, the iPod can still be read both by a Mac and by third party iPod management software.
    I recently replaced the battery on my PC laptop and during the period that I was waiting for the new battery, I plugged the iPod into a mac once to play music over my home network. That is the only thing I can think of that may have caused the error, although I've used my pod with PCs and Macs before. Any suggestions? I'm prepared to reformat/restore as a last resort, but I've got so much music on my pod that didn't make it on to my PC, so I'd rather not.

    Do you use FireWire or USB to connect the iPod?
    If USB, try disconnecting ALL of your peripheral devices including any hubs, except for a standard keyboard and mouse. Try the iPod connected directly to the Mac's USB port. Be sure to try more than one port.
    If FireWire, make sure it is connected directly to the Mac's port instead of daisy chained to an external drive or connected to a FireWire hub. Try it on more than one port, since it is possible the port has become faulty. If you have another FireWire device, use it to make sure the port is OK.
    If the Mac itself is running oddly, you need to start up from your Mac OS X installation disc (for the OS version you are using), and run Disk Utility from Installer's menu. Then run +Repair Disk+. If that completes with no errors or errors that are repaired, restart normally. Then run Disk Utility and use +Repair Disk Permissions+. Hopefully, those actions will fix the Mac.

Maybe you are looking for

  • Verizon Customer Service going downhill - Switching to another provider ASAP

    I used to love Verizon for their customer support/service and was so happy with them added everyone in my family on my plan.  My 2 year contract ended a couple of months ago and so I had been considering upgrading my phone and extending with another

  • Adobe support is atrocious.

    I have never in my 51 years of life run across a company with worse customer service. For two days now I have been trying to get in touch with tech support for what should have been a simple issue.  I purchased LR4 online 4 days ago.  Bought on my ed

  • Delete 70,000,000 records from a Table .... Please help

    I am new to Oracle database. please help on Oracle9i Enterprise Edition Release 9.2.0.1.0 We have one master table with 15,243,350 records and a child table 71,447,235 records in our Oracle database and the slow performance has been hitted our daily

  • Hyper-V R2 Cluster and CSV

    Hi, I'm pretty new in the hyper-v world. And I'm planning to migrate more servers to an hyper-v failover cluster with Fibre Channel SAN. I'm wondering about the CSV and the possibility to have less LUN with that. There is a lot of ressources about CS

  • Fried USB ports?

    Hi - new user here. Wondering if anyone can shed light on a problem: Just moved house, and have been setting up iMac. However, when I tried plugging in my Belkin USB port expander, and then plugging in applications to that device, the Mac told me the