IPod sync and update but shows 'don not disconnect' forever!
Hi all.
I have 5th generation iPod.
I have problem syncing my iPod and iTune.
I can sync my iPod to iTune and it update the music data than shows the sync is completed but it still shows on the iPod screen 'Do not disconnect'.
Is there any way to fix it? (restore?) or is my iPod already broken?
If there's anyone who happen the same, your advise would be a big help!
Thanks!
Mainbrain,
thanks for the comment.
It seems like you can unplug the iPod but then since i see it says 'do not!'
kida worry to do it all the time and hope it's not broken or anytime...
Similar Messages
-
I can not put the updated IOS 7 because my ipod says my ipod is already updated, but it is not.
WHAT GENERATION IS YOUR IPOD? IF IT IS THE FOURTH GENERATION U WONT BE ABLE TO BECAUSE IOS7 IS ONLY AVAILABLE FOR IPOD TOUCH 5TH GENERATION.
-
my ipod needs an update but i don't have internet service on my computer i was wondering is it posible to send the update to the email to update the ipod system through Wi-Fi?
If your iPod touch is already running iOS 5 then you should be able to upgrade to iOS 5.0.1 on the device with a Wi-Fi connection.
tt2 -
I downloaded the latest update of iTunes 11.4 today - Columbus Day. Went on to purchase songs. Then attached classic iPod to sync. upon attached usb to iPod, the "Do Not Disconnect" message appeared. Waited a long time and iTunes would not recognize my iPod. (10 minutes minimum. Gave up counting) Shut down iTunes and restarted. Still no recognition. Restarted computer - Wouldn't start. Unplugged USB and then it started. The only way to get computer to start up again was to unplug - now I'm worried that I've just screwed up my iPod. Upon starting back up - plugged iPod back in - sell no recognition. Am I up a creek with no paddle now? My iPod- touch is recognized and I was able to update it successfully. With that being said, it took a heck of a lot longer than it normally does post update. Was this the update that no longer likes classic iPods?
I have a brain injury and the classic is helpful at night when I can't fall asleep and I can play soothing stuff to help calm my brain down. The touch is way to bright and can cause lots of bad reactions due to light sensitivity - way too much blue light to trigger issues. The click wheel doesn't take so many moves to get to what I need.
Thank you to anyone that can help save my classic. medical bills are high and I can't afford to buy a new one. Two hours later, my classic still says do not disconnect and my computer does not recognize.
Thank you to any one for the ability to provide insight and troubleshooting.
pooped out.1. Try Resetting the iPod. Hold Select and Menu for 6-10 seconds - until you see the Apple Symbol.
2. Use iPod Updater to restore your iPod to factory settings.
See if those two steps clear up your problem. -
The bottom row of apps is unresponsive to touch. The slide lock in the same location works. Does anyone know how to fix this problem? I have tried restoring and updating. Thanks!
The bottom row of apps is unresponsive to touch. The slide lock in the same location works. Does anyone know how to fix this problem? I have tried restoring and updating. Thanks!
-
IPod keeps showing "do not disconnect"
when i connect my iPod to the computer, it shows "do not disconnect"
but after im done updating my iPod, it suppose to show "ok to disconnect", but all it does is flashing the stop sign and telling me "do not disconnect".
it only stops when i disconnect it from the computer...
.help needed......thanks''does it mean that i can't use my ipod as a hard disk if i uncheck "enable disk use" ?''
Yes. You must have the box checked to use iPod as a hard disk, and always unmount/eject iPod before unplugging it.
'' don't like to update my ipod because the process restores everything in my ipod''
If you choose to restore the iPod, all data is lost, but just by updating the iPod, all of your data stays on the iPod.
Make sure you have the latest iPod Updater
*nathan -
My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.
2.2.1 is not the latest available for any ipod touch.
Is yours the original ipod touch?
If so then:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it. I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
Please, I would absolutely love the help, i'd be eternally grateful for it.
-TylerNever mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.
-
I want to use one apple id in my macbook and iPad but i don't want pics to get sync and show in both devices, how should i stop this ?
Turn off My PhotoStream in iCloud on both the iPad and the Mac. PhotoStream is what shares your photos (unless you are using iCloud Photo Library Beta, in which case, all photos uploaded are accessible from all devices signed onto the same Apple/iCloud ID).
Cheers,
GB -
Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?
Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?
-
ive restored my ipod touch and updated everthing but whenever i plug it in the computer it freezes and i cannot sync any songs. can anyone help?
Did you happen to install Cydia or what they refer to as jailbreaker recently?
-
I downloaded songs on itunes, when I go to sync it to my ipod it "says" its syncing and then it shows up on the capacity bar but there are no songs on my ipod
In itune did you play any of the songs downloaded. If so plug your ipod back in an manualy check off to sync all music. If that doesn't work you might have to restore the ipod.
-
i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?
If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538. -
i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
After syncing and updating my phone froze-just shows the apple on the screen and a line under it
After syncing and updating my iphone froze-only shows the apple on the screen. PLease help!
See if you can reset the phone by holding the sleep and home button until the Apple logo comes back again.
If this does not work, try to connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore
Maybe you are looking for
-
My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow
-
HPE-170f suddenly starts giving POST codes at power on.
HPE-170f AY604AA#ABA Windows 7 Home Premium 64-bit HPE-170f suddenly starts giving POST codes at power on. Have Logitech solar blue tooth keyboard and Logitech bluetooth trackball. POST code is short, short, long ... if anyone remembers what that
-
Restoring after hard reset time machine?
Is there a way to restore after a hard reset (eg button down to long)
-
I have created a gorgeous iDVD with the theme from 6.0. I can't however, put the intro theme section into my web site. I have tried several things but none have worked. It only allows me to transfer the slide show part. The gorgeous part IS the intro
-
This idea is too extreme for idea exchange
This idea was partly inspired by this one and is so far out there that I didn't want to post it on the idea exchange. Can anyone from NI give me an idea if it would be possible to port LabVIEW and everything about it to Eclipse in time for LV2025? Do